3/4" IMPACT Wrench BATTLE - Milwaukee vs Makita vs Kress TESTED to the MAX
Вставка
- Опубліковано 1 сер 2024
- How well do other Impacts Wrenches compare to Milwaukee, Makita, Kress? is Milwaukee more powerful than Makita? Are Kress impact wrenches good? #milwaukeetools #impactwrench #battle #tooltest #vs #makita #kress #threequarterinch #impactdriver #machinerynation #powertools #projectfarm #torquetest #torque
Makita Link - www.makitauk.com/product/dtw1...
Kress Link - www.kress.com/en-gb/kress-20-...
Milwaukee Link - uk.milwaukeetool.eu/en-gb/one...
Check out our channel sponsors,
Oregon Products,
www.oregonproducts.com/en/
Aspen Fuel is a leading UK distributor of Aspen Products including Aspen Alkylate Petrol, Aspen Alkylate Fuel and Aspen Oil.
aspenfuel.co.uk/
If you enjoyed this video please hit the LIKE 👍 button, leave a comment and share the video with your friends!
Hi and welcome to the Machinery Nation UA-cam channel. We are here to make entertaining videos involving all types of machinery. On this channel you'll find comparison videos, product reviews, challenge videos, restoration projects, and much much more!
SUBSCRIBE to Machinery Nation to enjoy regular videos!
🎬 - / @machinerynation
*NEW MERCH!* Machinery Nation T-Shirts and More!
hayesmachinery.myspreadshop.c...
Join Machinery Nation for only 99p a month!
/ @machinerynation
If you'd like to visit our other UA-cam channel at MN Vlogs, find the link here,
📹 - / @finditfixitfarmit
Contact email,
contact@machinery-nation.com
Visit our shop for UA-cam Merch
hayesmachinery.myspreadshop.c...
Visit our sponsors Website
🌐 - www.hayesmachinery.co.uk/
Follow us on Social Media,
🎥 -Tiktok - / machinerynation
👍 - Facebook - / machinerynation
📷 - Instagram - / machinery_nation
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that we provide we may receive a small commission. There is no additional charge to you! We hold no responabiliy for the manufactuerers or thier products that we use. Thank you for supporting our channel so we can continue to provide you with free content each week!
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results.
Makita's 40v 3/4 gun is SO much better than that one
I think the fact Milwaukee are churning out so many tool speaks volume on how much R&D they’re not doing. While I agree they’re powerful, I’ve seen a lot of people say they’re throw away items. Whereas Makita can be repaired by even a layman. I made the mistake of buying a Milwaukee chop saw a few years back, it was 2 degrees off true, which is a lot when you’re doing second fix timber work.
These tool tests are certainly making an impact !
Haha, love it!!
Yes, it's anti-vibration for the battery/board, to protect it from the impacting vibrations when used. Vibrations kills batteries/electronics.
Good point cheers 👍🏼
Really enjoyed this video lads
Thanks Robbie 👍🏼
Having the forge battery on the milwaukee was a smart move for sure, as you're upping the spec of the impact straight away 😅
👌🏽
The biggest issue with Milwaukee (apart from build quality) is you can't get spares/parts, where's with other makes you can every little bit.
20 years ago they were very good when they were owned by atlas copco/aeg.
When it comes to 3/4 offerings, the Makita 40v gun is much better than the 18v one…
Isn’t that Milwaukee superseded already with a new model?
Why not use the XTG Makita 3/4?
Very good point. We invite manufacturers to send us these tools and say what we are doing and they send us what they think is correct.
Xgt is 40v and in a whole other world on torque
Excellent video again James it's got to be the most painful thing I have watched treating that Milwaukee like that 🤣👌
I know, it hurt a lot 😂😂
almost 5 years ago is when i purchased my 3 Makita impact wrenches, 3/8",1/2" and 3/4" the DTW 1001 thats how old it is and your other 2 ar recent within the last 24 months or less, I work in the heavy steel industry here in Canada and my co- workers have Dewalt, Milwaukee and Ridgid ,I have never had a warranty claim or needed service on any of my Makita impact wrenches or batteries or the chargers since i have owned them, the rest have had to do so, the Dewalt and Milwaukee guys have had to do the most , Milwaukee is bad for getting parts although the service is quick the parts are not, Dewalt is stupidly expensive to service, far more than any of the 4 purchased, my 1/2" impact wrench is almost as strong as the 3/4" one , One your right about ,Makita takes more years than any other cordless tool company to bring a new /revised tool to market, they don't need to, the existing works reliably and really doesn't breakdown like the other companies do and i have used Makita drills since the 80's when they had the 9.6 volt drills that were indestructible , too bad they quit making them, they were beasts 👍
It is very clear that the experience is directed, and the smell of hidden advertising is clear
No hidden advertising here. We were fair all the way through. Just passion for brands.
Cool video!
Thanks
How old is the review and your testing the LXT Makita. Where the XGT 40v Makita? Also Makita teal by the way not blue
Good vid....try the gen 3 milwaukee iam thinking buy 1😊
Thank you, we try what we are sent from the manufacturers, so can’t be to choosy haha.
So where would you really use these for other than industrial places?
Plus, the DeWalt one is supposed to be the best when other places have tested it, against the red one 👌
Only issues with Milwaukee is they're throw away tools the cost to fix them is more or near the cost of a new tool where as the Makita Bosch ECT are fixable at a low cost
Low cost fix because theyre shit. Why have a 3/4 drive gun if igg cant undo large nuts?
My 1/2” Milwaukee impact started acting up and was out of warranty. The cost to fix no matter what was wrong was $199 US. A brand new tool with warranty is $249 US. Of course the extra $50 is an easy choice, but I can’t stand the thought of the old tool/boat anchor laying around that in reality would prolly run fine with minor repair. I hate Milwaukee for that.
@@michaellarkin8049 why wouldn't use you use a breaker bar at first anyways 🤔
@@djrtime1398 they got a warranty of five years. How long do you expect it to last? As the video showed above you can get a diffenr tool that uuou can 'fix' but theres no point even owning the tool if you can use it for the job intended. Maybe wehave different expectations but if i can thrash something and work every day i dont expect something socheap to last more than 5 years.
I have two Bosch impact guns,both at least 7 years old.
isn't the new milwaukee 1/2 inch more powerful than the old 3/4 inch tested here would like to see that tested against the winner
Could well be, we will test this 👍🏼
Happy easter guys😊❤
And you Inga 🐣
what about doing a test on battery powered first fix nail guns
Nice One Guys Thanks again
Thank you Darran 🥳
Funny guys, had me chuckling all the way through. What does kill these impacts is salt water, I’ve repaired two.
Thanks Al. Good point!
It would be good to see a Dewalt tool in the line up 👌🏻
100%
3/4 Coming soon @MachineryNation
And a habor freight
Nice Video and great test even with soaking them into water 😁 please dont try this at home 😁 I would take the Milwaukee like it.
Thanks mate 👍🏼
@@MachineryNation I dont know if you have any Bosch Professional tools in the UK but I almost have everything from them. Maybe you could test one of them next time 😁
My 1/2 milwaukee takes off 4 wheels on one go no sweat on nh tractor wheels
Milwaukee rulezzzzzzzz !!!
Makita you should use 6ah battery
1ah wouldn’t make enough difference 👍🏼
Class loved that was the best review you could do still i do think the Makita was broken 😂😂
Would have to take it apart to see if anything broke from the impact because of the anti-vibration feature.
Looked floppier than my Makita tbh
@@billgates2903 I agree, would be interesting with a tare down to see if something broke and if it did, what it was that broke.
We did compare against Josh’s own 1/2 and it was similar sloppiness 👍🏼
@@MachineryNation thanks for the answer!
Milwaukee hat zwar die brutale Power doch kann einfach nicht meit der langlebigkeit und Ergonomie eines Makitas mithalten.
Would never buy Kress, Chinese brand 💩
So is Milwaukee
All of them are Great
Pretty much all of those sucks in terms of performance. MIlwaukee is still waiting for new 3/4 based on their newest 1/2 inch monster, Kress is like who cares, noname in other words, and Makita only cares about their xgt line. Inviting dewalt is pointless as they also wait for new 3/4 gun based on their overkill dcf961. If you want to get powerful gun it is better of waiting for new releases from milwaukee or dewalt or getting new milwaukee 1/2 inch wrench, dewalt dcf 961 on the other hand is killing itself type of a gun as 1/2 anvil inch is barely holding it together with that amount of torque.
I've never seen more warranty returns in my trade than all others put together. They are absolute rubbish.
Milwaukee is called milfuckyee