Kemper Morphing - How To & Creative Uses
Вставка
- Опубліковано 7 вер 2024
- After some requests I have made a video all about Morphing on the Kemper with some suggestions of both practical and creative uses. Apologies for the slight focus issues, I left the camera on auto focus by mistake and by the time I realised it was too late.
danleggatt
For business, collaborations or sessions - danleggattguitarist@gmail.com
#Kemper #KemperProfiler #KemperTips
I've had my Kemper rig for several months now and JUST got looking into the morphing option...thanks for making this video!
Thanks for the info, I just got my Kemper about a week ago and it has been quite a learning curve so far... This was very useful for me to know
Glad it’s been helpful!
I would love to get you in a complex twin engine plane (I'm a multi Instumented pilot and you're a great guitar player) over the mountains for a flight from Denver to Aspen on a snowy night and give you as lousy a tutorial as you give here for morphing and then turn you lose to land! It would not end well as you can Imagine!!! I've purchased two of of your packs and would encourage everyone to do the same. Why doesn't someone take the time to put out some really great tutorials on how to actually use this damn thing!! (I get it, it would take a lot of time and I don't think you could monetize it!) I would never advise anyone to buy a Kemper other than a really savy lifetime muscian or engineer, there is absolutely NO good tutorials out there (I'VE LOOKED LONG AND HARD, including none from the frigging company!!! Good luck you're on on your own with this complicated piece's of crap! I bought mine new form a smart guy who had his for 3 months and threw in the towel. I promise you there's a whole bunch of these turds laying in the bottom of peoples closets where mine is getting ready to go...
Bro, I had NO idea about this and it's fully blowing my mind. Love that blooming effect
Glad it was helpful! Thanks for watching.
Oh, man. You just made me (almost) happy. I ordered a Stage, without reading the manual first. I assumed I would be able to assign any of the switches to any of the effects. Specifically, I was shocked and disappointed to read this morning that only the top right buttons can toggle effects. What the hell? I assumed the Kemper could be used like an atomic Amplifire of Fractal AX8, with free assignments-like a ‘stompbox mode.’ I specifically want to be able to trigger a flanger on/off for very brief parts of riffs, as in Van Halen songs. I previously avoided using Scenes and that kind of feature, preferring a very simple ‘pedalboard’-type approach. Very glad to see I can use this morph feature to instantaneously trigger *(and hold!)* the same preset with the flanger added. And this video shows many other *useful* creative applications for morphing. I can now envision it as quite a nice tool, rather than an added complication. Thank you.
Glad the video helped. I find it really useful, in fact probably more useful than ‘scenes’ on other devices. I use morphing on almost every preset tbh.
Thanks so much for the simple explanation. Had my kemper nearly a year now and never touched on morphing before but absolutely love the feature now. Cheers 🍻
Glad I could help mate! I’ve got plenty of other Kemper vids on the channel to check out 👍
Thank you for showing me what the morphing feature does. I bought a Kemper Rack a few years ago and I'm just now prepping it for use, I'm slow like that. It will be updated and paired with a Fryette PS-100 amplifier. Of course I'll have to go to the Michael Britt store for some cool pre-sets.
Cool! If you enjoyed this and the tones you might enjoy the sounds I offer too -
ua-cam.com/video/g1lFRI-tF1o/v-deo.html
@@DanLeggatt Now you've got me making plans to get a Remote Foot Controller :) You're a fine guitarist, sir. I'll be following.
Amazing video. Can I ask you about how to make delay and reverb going through like a positive feedback like some of analog delay can do? I dunno if I've espressed my request correctly, I just wanted to do something pulsing and distorted in an infinite kind of loop. Thank you again
Just fabulous Dan, can’t wait to bump into you and buy you many beers!!! Thanks so much
No worries Dave! Glad it helped 🍺
Great informative video. Great tone and playing man 👏🏻👏🏻
Fantastic thank you ... you've given me some great insight as to what I need to do now with my Kemper!!
Great video, we’ll made, enjoyable and informative. Now a subscriber 👍
saunds59 Thank you 👍
Coencidently watch this on the hottest day in the uk so far 😂 wicked vid man thanks
🤣🤣
Great post. Lots of useful info. Appreciate it.
Thanks for the vid, my man. Very insightful and useful
Glad it was helpful!
Ah the pad thing is awesome. Off to dig out my remote now!
A video of the various settings of the output stage I.e. stacked versus stereo etc
Hey dan, just got this on my recommended and thought id watch it. Is there a way I could get this whole performance?
Very....nice....tone....my friend
Thank you 🙏
Excellent video! Loving your channel.
Cheers 👍
Great video - Killer sounds - Good work man.
Thanks for checking out the video man!
Your an excellent player! Thank you so much 😊
Most kind, thanks
Great video, gonna attempt setting up morphing for the song Overkill by Men At Work for the solo. There’s a cool delay that comes in at the end of the solo.
And cheers, nice Nonic pint glass.
Cheers! 🍺
And thanks to your video I figured out morphing. Gotta watch the part again about how to reset it though.
Really enjoying your videos Dan. Thank you for Sharing your knowledge. Just subscribed..
Thank you 👍
Super informative vid...thank you!
No worries 👍
Love this video, mate, cheers!
Glad you enjoyed it!
very nice.. are you near Brighton by any chance...I hear the accent?!
Could you perhaps take us through the shaper/phaser preset you mentioned!
Thanks Malc.
I’m further down the south east coast in Kent 👍 I’m not sure I still have that particular patch but I did further videos on the Kemper and offer presets up on my website. Cheers 👍
Enjoying your videos 👍
thanks bro!!
Sounds killer!
Thank you! I did have a look for my iRig to check out the Mooer app but no joy yet sadly.
7:50 Instructional begins
Congrats for your lovely guitar sound. Which profiles are you using in this demo? (I loooove your crunch sound)
I’m not sure which it was to be honest but I’ve released some tones. More info and demo here - ua-cam.com/video/g1lFRI-tF1o/v-deo.html
awesome tutorial bro!!!thank you for making this video,one question are you using monitors or a real cab?
This video is the Kemper direct out into my interface. At home I monitor through studio monitors normally. I always use a standard guitar cab on stage. I am hoping to make a video on the subject of monitoring soon 👍
@@DanLeggatt ahh ok,thank you.
Thanks really appreciate this video as just getting my remote. Can i use this morphing technique to add an automatic wah or would i be best adding an expression pedal ?
In theory yes but I doubt you would get great results. I would definitely add an expression pedal for wah personally
Thank you! I am running into an issue with my morph and expression pedal. I can't get it to stop at a max value that I choose. It will go full max if I press the pedal all the way down.
That’s likely an issue with the expression pedal itself. I’ve had a similar problem with a cheap one.
@@DanLeggatt It's a Dunlop, but I have had it a while. I have others I'll give a try.
That crunch sound in patch 3 at the end of the video is meaty! What profile is it?
I’m not 100% sure but could have been a MB Helios
Awesome
Hey Dan man how do you get that effect at 3:57? That sort of blooming sound where the note seems to go into feedback. Appreciate it.
I’ve released some of these tones publicly. Check out - ua-cam.com/video/g1lFRI-tF1o/v-deo.html for more info 👍
@@DanLeggatt So that bloom effect is in that pack correct?
A version of it is, there is a full demo in that video of what’s included.
@@DanLeggatt Thank you Dan! Cheers!
Is there a tutorial out there to set up and configure the freeze function?? Can't get it working.
The freeze sound from this video? What isn’t working?
can you assign a morph for gain and 1 or 2 pitch whammy to the same control pedal at once? to control multiple parameters at once?
Yep 👍
Great vid! Does this work with another midi controller or does it have to be the kemper remote? I have the berringer foot controller. Thanks
I’m actually not complaining sure as I’ve always had the remote. I’d imagine you can. There is probably a morph midi cc# in the manual that you could assign. I also think it may be possible to run a footswitch or expression into the kemper footswitch jacks on the back and assign it that way.
Thanks Dan. I actually have the Eureka prom installed on the controller and I was able to assign the expression pedal to the morph function, who knew!!! Had the kemper all this time and never been able to use until now. Thanks again for the vid
What was that sound or effect at 6:26? Can you share what was going on there? Or share the preset?
It’s one of the ‘shaper’ fx on the Kemper. Possibly the recti-shaper? It’s morphing the mix. After a lot of requests I’m looking at offering fx presets to download. Cheers
@@DanLeggatt Excellent Dan! Offering presets would be fantastic! Looking forward to that.
can you post a link for your rack case please ?
www.studiospares.com/trojan-carbon-shallow-rack-case-6u-459280.htm
@@DanLeggatt SADLEY IT WAS DISCONTINUED BUT THANK YOU FOR RESPONDING
U should Rob a snazzy fx
Can the Kemper do the feedback thing?- AKA Digitech Freakout? Thanks.
You can add compression or gain by morphing to improve feedback but you still need some volume to get it there. The Freq-Out can do it with no volume somehow. Through witchcraft and wizardry is my best guess 😂
Lol. Thanks dude.
Any chance you could share that preset?
I released a set of profiles including the morphing tones. Here’s the full video description and links - ua-cam.com/video/g1lFRI-tF1o/v-deo.html
where did you get your remote cable that is 90 degrees into the Kemper?
Just Amazon mate. It’s just a short cat5 patch cable running to a locking jack for the remote on a patch panel.
When i press the remote for the 2nd time the upper LED Does not light Up. Whats wrong?
In the system menu there is a button called something like ‘rig button to morph’, it may have been turned off at some point. That will need to be turned on 👍
@@DanLeggatt THANK YOU! I stayed up to 3am trying to figure it out. You're an angel
No worries man!
Do you record via spdif or xlr?
XLR stereo to my interface, which is just a Behringer Uphoria UMC404HD.