Tack so mycket! I was waiting to see this video to understand the cable removal! Thanks for sharing. BTW, the small connector under the console and the cigarette lighter: yes, that is the light for the cup holder. I installed that on my XC70. I bought a console from a 2015 XC70 with the lights and I swapped it. It’s totally worth is. Volvo Sweden made a video of installing the LED into his console but I was lucky enough to find the console with the lights already on.
Hello Pablo. Thanks. I have seen the cup holder lights and it looks very nice. I was thinking of doing another solution, but as you say its worth it, I will follow your advice. Good idea to check for used ones first. Regards Swede Make
Hey pablo, i bought the light guide and diode for the cup holders on my ‘13 volvo xc70 but im a little confused on how to install them, anyway u could describe how i connect the lights and position them?
@@samallen2599 I did a complete swap console. I believe you only bought the parts for the lights. I would recommend you to find the UA-cam channel “Volvo Sweden”. Yuri, the guy there made a video showing how to install the led and light guide
I appreciate the video. It got me 97% done. The last piece. He says to push in the white clip which is incorrect for removal. Flat head screw driver and pry the white clip out. Also there are 2 screw that are on the dashboard facing the bumper. On the XC60. I had to drill them out. They won't be missed!
Hello Gerald. If you have no button on the white clip there might be a difference on the XC60. For V70 and S80 you press the button and without force remove the clip.
Hi guys, If you don’t mind I would like to ask,I have issues with my gear shifter on xc60-2015 D4 2l diesel,sport mode doesn’t work and light as well! My question is: If I connect just socket to the replacement one instead of replacing whole shifter just for testing ,is the light will come up?
Great video, i would really want to know where in the torpedo wall you out the wire for for heater socket. (Kupe varmare). I have not found any video of that
Nice tutorial Sr., By any chance do you know what bulb does that center console uses in the back? I'm going to put led but can't find what number uses, I don't want to take things apart before knowing what bulb number I should have. Cheers...👍
Hello Luis. Thanks. I dont know type of bulb, sorry. You could register on jagrullar.se. And put the question there. Its common to get an answer even if its English.
Hi! Just came across this video and always thought the old style was for geartronic, and the new style was powershift. Apearently this fits geartronic too! Do you need any software for it to work or can u simply swap out? Thanks in advance! And very helpful video.
Hello Jeremy. Yes, it works on both geartronic and powershift. There is no software needed for this change. I had this same gear lever on my previous V70 with geartronic. Gear lever from S60/V70/S80 should be bolt on. If its a 2013 gear lever, the knob shows which position you are in. (Dont remember the deviation on PCB on that one). Merry Christmas.
Thanks for your reply! I was wondering, because I’ve never really seen anyone do this swap untill I found this. We drive a v40 too, its a manual but still has the new style lever wich is much nicer! Seeing this makes me want to go and find one to swap with. First I have a tft retrofit to do! Haha. Merry xmas to you too and thanks again!
Hello Ahmed. I am not sure. But I would be suprised if it did not work. Check used parts web sites and see if you can verify on pictures between old an face lift version.
@@swedemake5571 Bara plug and play? eller behöver man uppdatera någon mjukvara? tänker främst på belysning i nya spaken och att man manuellt kan välja växlar om man petar spaken till höger
Hi Pay. I am not really sure about that. I believe there could be a difference, but that 60,70 and 80 series will work. (I have read somewhere that on V70 2013 there is a difference in regards to the light in the lever. (Position is shown by led in lever knob)).
Hmm. It might be that the flex wire is broken between circuit board and the Led:s. I have not heard that there would be a Gear lever that does not have light in the knob.
Hola. Compré la palanca usada. Lo puedes encontrar aquí: bildelsbasen.se. Tal vez puedas encontrarlo en una tienda española de repuestos de automóviles usados.
Hej. Har hört av andra att de är dåliga på att svara. Jag har själv fått bra support av dem. Jag tycker inte att du ska betala mer. Felet är ju hos dem. Öppnade du en ”ticket” (ärende)? Hur långt kom du i själva processen? Började du med guiden att koda av bilen? Och sedan betala för byte till TFT och sen körde den guiden?
Hello Donatas. I believe thats the best way. This as you disconnect modules in mid console when doing this operation. (On the other hand, if you have Vida or Vdash, and you can always erase error codes its not a must to disconnect the battery.
thank you for your sharing, I did the same manipulation on my s80 2012 and it works, but I always have an error message while driving 'selector repair requested' and another message with a sound effect when I stop the engine of the car 'gearbox is not in position P' and the message still appears on the panel and the lighting of the knob of does not turn off even after the closing of the doors it consumes the battery and I do not find any solution until now, please if someone has encountered this problem or has a solution in this sense share it with me.
Hello. Maybe the pcb on gear lever is broken. I dont know if you easily could switch from your old gear lever. But give it a try to disassemble the old one to see.
@@swedemake5571 yes that's what I'm going to do, although they don't have the same light transmission wiring plug, I just mounted the motherboard of the new one on the old selector but it didn't work the problem persists, so I'm thinking of doing a direct solder on the old selector
Hello Gerrit. I guess that you mean that it can be put together 100%. Yes, its ”bolt on”. So it all works/fits accordingly. Note! On the 2013 version of gear lever, there are diodes in the lever showing position of gear. And its not so pretty from my perspective. I had this gear lever on my 2009 V70 and just moved it to this S80.
Tack so mycket! I was waiting to see this video to understand the cable removal!
Thanks for sharing.
BTW, the small connector under the console and the cigarette lighter: yes, that is the light for the cup holder. I installed that on my XC70. I bought a console from a 2015 XC70 with the lights and I swapped it. It’s totally worth is. Volvo Sweden made a video of installing the LED into his console but I was lucky enough to find the console with the lights already on.
Hello Pablo. Thanks. I have seen the cup holder lights and it looks very nice. I was thinking of doing another solution, but as you say its worth it, I will follow your advice. Good idea to check for used ones first. Regards Swede Make
Hey pablo, i bought the light guide and diode for the cup holders on my ‘13 volvo xc70 but im a little confused on how to install them, anyway u could describe how i connect the lights and position them?
@@samallen2599 I did a complete swap console. I believe you only bought the parts for the lights. I would recommend you to find the UA-cam channel “Volvo Sweden”. Yuri, the guy there made a video showing how to install the led and light guide
I appreciate the video. It got me 97% done. The last piece. He says to push in the white clip which is incorrect for removal. Flat head screw driver and pry the white clip out. Also there are 2 screw that are on the dashboard facing the bumper. On the XC60. I had to drill them out. They won't be missed!
Hello Gerald. If you have no button on the white clip there might be a difference on the XC60. For V70 and S80 you press the button and without force remove the clip.
Hi guys,
If you don’t mind I would like to ask,I have issues with my gear shifter on xc60-2015 D4 2l diesel,sport mode doesn’t work and light as well!
My question is:
If I connect just socket to the replacement one instead of replacing whole shifter just for testing ,is the light will come up?
@todorpuhalev2278 Hello. I think that you should be able to try the way you propose.
Awesome video, appreciate your knowledge sir!!!!
Thanks. 😊
Thank you so much this video is excellent
Thank for helping video..please make more video about volvo like this👍🏾👌🏾
Hello Ladam. Thanks, appreciate it. Yes, there will be more videos in time now when summer is coming.
Great video, i would really want to know where in the torpedo wall you out the wire for for heater socket. (Kupe varmare). I have not found any video of that
Hello. I will check
Nice tutorial Sr.,
By any chance do you know what bulb does that center console uses in the back? I'm going to put led but can't find what number uses, I don't want to take things apart before knowing what bulb number I should have.
Cheers...👍
Hello Luis.
Thanks.
I dont know type of bulb, sorry.
You could register on jagrullar.se. And put the question there. Its common to get an answer even if its English.
Hi!
Just came across this video and always thought the old style was for geartronic, and the new style was powershift. Apearently this fits geartronic too!
Do you need any software for it to work or can u simply swap out? Thanks in advance! And very helpful video.
Hello Jeremy. Yes, it works on both geartronic and powershift. There is no software needed for this change. I had this same gear lever on my previous V70 with geartronic. Gear lever from S60/V70/S80 should be bolt on. If its a 2013 gear lever, the knob shows which position you are in. (Dont remember the deviation on PCB on that one). Merry Christmas.
Thanks for your reply! I was wondering, because I’ve never really seen anyone do this swap untill I found this. We drive a v40 too, its a manual but still has the new style lever wich is much nicer!
Seeing this makes me want to go and find one to swap with.
First I have a tft retrofit to do! Haha.
Merry xmas to you too and thanks again!
Hello! Thank you for your video! I have a manual S60 2012, are the steps similar when changing to the facelift gear lever?
Hello Ahmed. I am not sure. But I would be suprised if it did not work. Check used parts web sites and see if you can verify on pictures between old an face lift version.
Yes the steps are identical Ahmed
fungerar detta på en xc70 08 också? tror det är samma som v70 gen 3. Många reservdelar är från v70 då min gjordes i skittet 07/08
Hej Carl. Ja det gör det. Om du har P3 plattformen. Jag hade denna på min förra också, en -09.
@@swedemake5571 vart får man tag på nya spaken? har du art nummer
Går ju att söka på skroten med art nummer
@@swedemake5571 Bara plug and play? eller behöver man uppdatera någon mjukvara?
tänker främst på belysning i nya spaken och att man manuellt kan välja växlar om man petar spaken till höger
Du hittar dem på bildelsbasen. Har inget artilelnummer men sök på V70 2014-2016. Eller S60,S80
Nej, du behöver inte ny mjukvara. Det ska vara plug and play. Har en annan video på kanalen där jag byter på en -09 också.
what is the shifter you installed? would have been nice to see the final fit. can you drop a part # in description
Hello Jon. It a shifter from a 2014-2016 v70/S60/S80
Just google a 2014 to see the final result
Just changed mine gear shiffter and i don’t remember where to conect green conector on pasenger side. . Any ideas?
Hello Donatas. Could it be the connector for the gear lever connection?
Hi. Thanks for the video.
Will it work fully on 2010 v70? It's p3 platform but I have concerns that the lights on the new lever may not work
Hello Pav. It should be no problem. Mine was a 2009 V70 and it worked for me.
@@swedemake5571 that's great. Thanks for your answer. 👍
@@swedemake5571 Hi. One. More question. Does it need to be an assembly from v/s60 or is it v40 also going to fit?
Hi Pay. I am not really sure about that. I believe there could be a difference, but that 60,70 and 80 series will work. (I have read somewhere that on V70 2013 there is a difference in regards to the light in the lever. (Position is shown by led in lever knob)).
Does this get a light aswell on the gear shifter itself? Change mine today. But light dosen’t work. Thanks flr anwser
Hello Larsen. There should be light on the top. You did not forget to connect the circuit board?
Mine dosen’t get any light, i connected wire on left side who is the only connector i saw on the gear knob. Something i missing maybe?🤔
Hmm. It might be that the flex wire is broken between circuit board and the Led:s. I have not heard that there would be a Gear lever that does not have light in the knob.
Okay. Like led in the gear knob itself?
Yes exactly
Where can I buy this new oalanca? Can you tell me year and model? thank you
Hola. Compré la palanca usada. Lo puedes encontrar aquí: bildelsbasen.se. Tal vez puedas encontrarlo en una tienda española de repuestos de automóviles usados.
@@swedemake5571 gracias amigo, esa palanca es de un s80 2015? Gracias!
Hola. Sí, esto es de S80 2015. Debería poder usar S60, V70 o S80 2014-2016.
hello, im from estonia can you tell me where i can buy this shifter ? and does he go to volvo s60 2001 ? sorry for my inglish :D
Hello Asicks. Your english is fine. ☺️ It does not fit a 2001 S60 as its not the P3 platform.
Good one thanks 👍
will this work on 2008 model
@@Kanzenjdm Hello. Yes it will.
Bra jobbat 👍
Tack. Elinor, gick det bra med TFT-skärmen?
@@swedemake5571
Hejsan tack så mycket för frågan .
Det gick inte de svarar inte.
Kanske jag ska betala igen. Vad rekommenderar du?
Hej. Har hört av andra att de är dåliga på att svara. Jag har själv fått bra support av dem. Jag tycker inte att du ska betala mer. Felet är ju hos dem. Öppnade du en ”ticket” (ärende)? Hur långt kom du i själva processen? Började du med guiden att koda av bilen? Och sedan betala för byte till TFT och sen körde den guiden?
Nice video. Do i need to disconect battery?
Hello Donatas. I believe thats the best way. This as you disconnect modules in mid console when doing this operation. (On the other hand, if you have Vida or Vdash, and you can always erase error codes its not a must to disconnect the battery.
Does all lights and indicators working on new gear shifter after install? ✌️🤔
Yes it does.
Tack så mycket! 😁
Thanks for the video. Where can I buy that upgrade part online?
thank you for your sharing, I did the same manipulation on my s80 2012 and it works, but I always have an error message while driving 'selector repair requested' and another message with a sound effect when I stop the engine of the car 'gearbox is not in position P' and the message still appears on the panel and the lighting of the knob of does not turn off even after the closing of the doors it consumes the battery and I do not find any solution until now, please if someone has encountered this problem or has a solution in this sense share it with me.
Hello. Maybe the pcb on gear lever is broken. I dont know if you easily could switch from your old gear lever. But give it a try to disassemble the old one to see.
@@swedemake5571 yes that's what I'm going to do, although they don't have the same light transmission wiring plug, I just mounted the motherboard of the new one on the old selector but it didn't work the problem persists, so I'm thinking of doing a direct solder on the old selector
Maybe you have the 2013 version? It may differ.
@@swedemake5571 yes potentially, my mechanic told me we have to look for another selector or buy an adapter which is available on ebay
Does it work all the way?
Hello Gerrit. I guess that you mean that it can be put together 100%. Yes, its ”bolt on”. So it all works/fits accordingly. Note! On the 2013 version of gear lever, there are diodes in the lever showing position of gear. And its not so pretty from my perspective. I had this gear lever on my 2009 V70 and just moved it to this S80.