Would definitely appreciate an interior /reupholster on this car. I think this build is so sick. Hope the exterior gets a wrap or paint in the end she’d be a beaut.
Well an upholstery video would be cool sure I’d like to see that. BUT, you know what I’d REALLY like…. ….a new update video on THIS CAR PERIOD!!! I mean what the…. ….it’s been 5 months plus since we have had any kind of update or progress video of any kind my man. Why? What’s the dealio? I for one was quite invested in this series and everything going into making this vehicle what it is?
@@mathiasnkristensen to you, and JDM fanboys, yes. The demon is going to be one hell of a build if completed, I dont think you guys understand how cool that will be.
@@roemalo4331 I am in no way a fanboy. It's just that a V10 in a "regular" car is way cooler than building up something to it's original form. With the 240 there is so much fabrication and uncertainty, that it's so much more exciting when they finally solve problems. With the demon you know that it's possible. It's not a one off like the 240.
I think an upholstery vid would be great. I’d love to see the color scheme come together on such an awesome interior. That is if you decide to keep the seats…
This video is an inspiration to keep making progress on my build, keep up with the details along the way, working through the problems. Need to hear this run the echo from the Narrows Bridge
I keep holding out hope for a update because this car is the reason I subbed but it just seems like every other week there is a new car or its the demon. What's going on with this thing
Cut so much of the low offset of the hood. An buy a carbon fiber Cowl Conduction hood scoop and mount it over the cut out. U remember the old cowl Conductions like the old I-ROCK Z Camaros. I thot they looked so mean with them hoods. I think its going to be sick i love this project.
Reading comments and thinking, I believe getting it to run and drive is way more important than thinking about doing the interior. But that's just me. lol.
Hochachtung, über 100 Siege zur Belohnung, etwas einzigartiges zu schaffen, in Germany nicht Zulassungsfähig, dennoch hier ist Können, Präzision, Geduld und Zeit gefragt Bleibt gesund gruß Dieter
“I just shit onto the floor, and now I’m going to split it up into 5 pieces of shit for 5 lucky winners that order something from the website” just kidding, I love it
To answer your question on the seats. The Juke RS seats are definitely sportster CS seats, you will need the $350 bases to be basically stock CS seats. The 370z nismo seats have a back shell of a CS seat but it’s been cut at the top by a couple inches, I would assume to clear the roof. Hinge is different than the Juke RS. The Juke RS seats can be modified to add the folding option handles. The 370z do not fold. The bases on the 370z nismo are closer to a CS cross base vs the sportster.
See, you definitely live up to the channel's name! Scrap life... A perfect carbon hood ready to bolt to scrap! Way to go Couldn't you think of picking a carbon hood with a different design? Like with an elevated duct to clear on the V10's head? Try to use metal hood and fab your own duct? Definitely not the right way of doing things But its your money dude
Man, that suxs having to cut a Siebon hood like that. I know it wasn't cheap. I would have searched for a OEM styled, 1" cowl carbon hood. Then fabricate vents in the cowl if you'd like. Did i miss the completion of the exhaust system? 🤔 Man... I always say "Hot Rodding will kill all is car guys one day" when i see it experience crazy set backs 😏 cool build and good job💪
Please change the seats to that awesome 90's bus texture that would fit the car so nicely! ( lot's of grey with weird fireworks designs, or weird geometry shapes.) If you know you know.
I’ve watched maybe one or two of your videos before, but the beginning of this build is what got me to subscribe. And honestly… I’m glad I did. It’s not just the bad assness I know this will be when it’s 100% complete, it’s also how well you make these videos and how well you fabricate. As someone who works on cars as well as does fabrication, it’s all very pleasing to see it done properly. Can’t wait for you to finish it man 💪🏽
Magic hands,I like what you did to make the shift lever fit the oem interior of the 240 sx,but a tear went down my face when you cutted the carbon fiber hood,but this project is so complicated that sometimes you gotta do what you gotta do!!!And yes I would like to see a video about the interior,so that it matches with the nismo seats!!!
I have a viper t56 in my cuda and used a mustang shifter... can't remember which model off hand, but wasn't offset like the viper and worked much better for me.
So far so good..the seats don't look bad..all you need is about another 1 1 1/2 or 2 lowe and you will be good.. definitely gonna be a good swap when it's done.🏁👍🏽
I’m curious about something. Now that the hood has been cut and the carbon fiber is now exposed would you need to epoxy it to seal it up from the elements? I’m thinking that it would start to get little cracks and moisture creeping in where it was cut.
Is it possible to make the opening go back and install a Plexiglas raised window? You need to show off the motor. That big ass motor looks really cool in that car. Just a thought
You should have been able to slowly grind off the original welds on the shifter arm in order to retain the pin for strength and then flip it and weld it back on. Wanna see how this turns out, hoping it all works out really good. Wanna see more of the Corvette and 3000gt as well.
You should drop off the hood with the pieces for the intake box I’m sure they could work some magic to get rid of the hole. Maybe turn the large vent into two separate vents going off to the sides and add a bit of material to the middle
If you bought the Origin 2 hood it would have fitted without cutting, it has a large hump in the center without those vents. It has vents way up near the windshield.
i think you should recolour the seats so they match the interrior not the other way around.. the red accents stand out way too mutch. all black seats would fit mutch better
Would definitely appreciate an interior /reupholster on this car. I think this build is so sick. Hope the exterior gets a wrap or paint in the end she’d be a beaut.
Well an upholstery video would be cool sure I’d like to see that. BUT, you know what I’d REALLY like….
….a new update video on THIS CAR PERIOD!!! I mean what the….
….it’s been 5 months plus since we have had any kind of update or progress video of any kind my man. Why? What’s the dealio? I for one was quite invested in this series and everything going into making this vehicle what it is?
Is there an update on this car?? Or is this the last video??
We need the demon on the channel guys spam the comments demon on the channel
nah i want more of the Viper build
Agreed I’m not a fan of JDM cars
Nah man, the 240 is much more interesting. Only answer is for them to start posting 2x the amount of content 😆
@@mathiasnkristensen to you, and JDM fanboys, yes. The demon is going to be one hell of a build if completed, I dont think you guys understand how cool that will be.
@@roemalo4331 I am in no way a fanboy. It's just that a V10 in a "regular" car is way cooler than building up something to it's original form.
With the 240 there is so much fabrication and uncertainty, that it's so much more exciting when they finally solve problems. With the demon you know that it's possible. It's not a one off like the 240.
can we get a new video on this please
I think an upholstery vid would be great. I’d love to see the color scheme come together on such an awesome interior. That is if you decide to keep the seats…
totally love the builds and this is an excellent one and truly would love to see an interior video as much as the engine /transmission
These unusual builds are what I love!!.
“This Pig guy seems like a solid dude” - Meatloaf
The upholstery would make a really good video :) you for sure gotta make it match the seats
Very cool build. Wouldn't mind seeing some videos on the interior work.
You would have done better using a hellcat engine or an LS more space
I need a update.. How is it coming along?
Such an awesome build! I love the videos on the 240sx! Please definitely do an interior vid. I'd be very interested in that.
would be really interested in a detailed video of the wiring and the thinking behind it!
Definitely do an upholstery video. That would be cool.
This video is an inspiration to keep making progress on my build, keep up with the details along the way, working through the problems. Need to hear this run the echo from the Narrows Bridge
I keep holding out hope for a update because this car is the reason I subbed but it just seems like every other week there is a new car or its the demon.
What's going on with this thing
Getting close. Lots of parts delays. Will be running in the next video. 👍
What a cool build. Kudos to you sir
I enjoy watching the solution to issues gears that are rotating in your brain! Sub'd
Oh' God JUKE PARTS, Think i am going to Hurl !!!
so is this project dead or what happened
You should do a roll cage make it mean lol. with all that hp ur gunna need it 😅 jk but would be cool. ❤
It's been over 7 months since the last video on this car. Are there going to be any more videos?
Great video as usual. Yes, a video on upholstery would be good. thanks.
Looks great man! Would love to see an upholstery video like you described!
Definitely do an upholstery video, it’s always fascinated me and also the part I’m totally terrible at so a little how to DIY would be awesome lol.
When’s the next demon vid coming out ?
Hell yeah man I love your videos 👍👍 I got 2004 BMW E 46 M3 with 8.0 L viper, V 10 in it. And for the wiring I end up using Holley.
is there an update on this car? its an awesome project!
Cut so much of the low offset of the hood. An buy a carbon fiber Cowl Conduction hood scoop and mount it over the cut out. U remember the old cowl Conductions like the old I-ROCK Z Camaros. I thot they looked so mean with them hoods. I think its going to be sick i love this project.
Fibre de carbono
Fibra De Carbono!!
Reading comments and thinking, I believe getting it to run and drive is way more important than thinking about doing the interior. But that's just me. lol.
Was it not possible to raise the rear of the hood with hinge spacers or would it still have touched in placed
Black paint on intake or even carbon fiber wrap the intake to match.
XJS JAG w/ V10 😮
Ты уничтожил две прекрасные вещи в этом ролике: прекрасное шасси и прекрасный капот......а все из-за вонючего v10....
Fibra de cabron? 😂... just kidding.. fibra de carbono!
😂😂😂
I own a Nissan 200sx the same colour here in Australia. We have the turbo 2 litre only in Australia.
Bro you are my hero
Why not use a 5th gen ZL1 scoop or add a 6th gen ZL1 but cut it to work like a C7 zr1. Scoop is separate from hood
I had the same thoughts about the 6th gen zl1/7th gen zr1 style scoop. We may try to make that happen.
I Hope this build continues to fruition! Best of luck and thanks for the content!!!!
has anyone ever said you sound exactly like Mayor Quimby from the Simpsons
sweet looking so far
Fibra de Carbon!!
Are you gonna put a scoop over the hole in the hood ?
Why didn’t you just go with a raised hood? Seems l Ike a divot was a poor choice…
Needs a Nismo SRT10 badge and upholstery now...
crazy that the only project you are working on that I watch/care about gets the least views.
Legend Silvia❤
Is there a video of the Viper engine running in this car cause if not I know there's others who would be super interested
I need a update video
Hochachtung, über 100 Siege zur Belohnung, etwas einzigartiges zu schaffen, in Germany nicht Zulassungsfähig, dennoch hier ist Können, Präzision, Geduld und Zeit gefragt
Bleibt gesund gruß Dieter
Who cares what anyone says they are just mad because you’re doing something they can’t
Small car massive engine Carroll Shelby's formula.
I love these videos but i cant get Mayor quimby out of my head 😂
Fibra de Carbon.....gimme some!
just put a turbo on it u put a too big engine ina too small car, why stop short and cut corners now? just air feed it witha turbo
“I just shit onto the floor, and now I’m going to split it up into 5 pieces of shit for 5 lucky winners that order something from the website” just kidding, I love it
you should get like a camaro hood that is raised down the middle so you don’t gotta cut the hood
why would anyone want your cut off bits off trash man jeez
Do you guys have any charger Widebody rims for sale?
To answer your question on the seats.
The Juke RS seats are definitely sportster CS seats, you will need the $350 bases to be basically stock CS seats.
The 370z nismo seats have a back shell of a CS seat but it’s been cut at the top by a couple inches, I would assume to clear the roof. Hinge is different than the Juke RS. The Juke RS seats can be modified to add the folding option handles. The 370z do not fold. The bases on the 370z nismo are closer to a CS cross base vs the sportster.
See, you definitely live up to the channel's name! Scrap life... A perfect carbon hood ready to bolt to scrap! Way to go
Couldn't you think of picking a carbon hood with a different design? Like with an elevated duct to clear on the V10's head? Try to use metal hood and fab your own duct? Definitely not the right way of doing things
But its your money dude
Man, that suxs having to cut a Siebon hood like that. I know it wasn't cheap. I would have searched for a OEM styled, 1" cowl carbon hood. Then fabricate vents in the cowl if you'd like. Did i miss the completion of the exhaust system? 🤔 Man... I always say "Hot Rodding will kill all is car guys one day" when i see it experience crazy set backs 😏 cool build and good job💪
Fibra de carbon
Winner! Read and follow instructions in the description please
@ScrapLife Garage let's goo. Emailed you
Get the hump from the 350z HR and mold it to the factory hood
Since u cut it, u should just cut a larger spot back and make it as front mid engine as possible 🤣.
I’ll say this, I love the rims bro. What is the name of the rims?
Gotta cut, what you gotta cut, fuck it. Phenomenal build glad to be here to follow along, keep up the amazing work ❤🔥
My favorite part of every video is the “random” pieces y’all give away 😂👌🏽 it’s like a lil mini game guessing what you’re going to break down
Please change the seats to that awesome 90's bus texture that would fit the car so nicely! ( lot's of grey with weird fireworks designs, or weird geometry shapes.) If you know you know.
I’ve watched maybe one or two of your videos before, but the beginning of this build is what got me to subscribe. And honestly… I’m glad I did. It’s not just the bad assness I know this will be when it’s 100% complete, it’s also how well you make these videos and how well you fabricate. As someone who works on cars as well as does fabrication, it’s all very pleasing to see it done properly. Can’t wait for you to finish it man 💪🏽
Hurry
Magic hands,I like what you did to make the shift lever fit the oem interior of the 240 sx,but a tear went down my face when you cutted the carbon fiber hood,but this project is so complicated that sometimes you gotta do what you gotta do!!!And yes I would like to see a video about the interior,so that it matches with the nismo seats!!!
I take comfort that I know, I truly believe, that maybe a decade from now, that engine will be reunited with a proper Viper chassis. 😢
So far so good keep up the good and hard work 💪🏽
I have a viper t56 in my cuda and used a mustang shifter... can't remember which model off hand, but wasn't offset like the viper and worked much better for me.
Fibra de carbono
So far so good..the seats don't look bad..all you need is about another 1 1 1/2 or 2 lowe and you will be good.. definitely gonna be a good swap when it's done.🏁👍🏽
I’m curious about something. Now that the hood has been cut and the carbon fiber is now exposed would you need to epoxy it to seal it up from the elements? I’m thinking that it would start to get little cracks and moisture creeping in where it was cut.
Is it possible to make the opening go back and install a Plexiglas raised window? You need to show off the motor. That big ass motor looks really cool in that car. Just a thought
I would like some Fibra de carbon please!!
I was gunna say why are you worried about seats and air boxes when you haven’t wired, fuel system and started this cheecka??
I fricken love the USDM Kouki. Makes me miss mine. Even tho it was an auto 4 banger! LOL
Hate to say it but.... Seats are way to high looking
I wonder if the Origin cowl hood would have cleared. Or how a Dmax style hood could have cleared with the raised vents.
DONT RUIN THAT CAR WITH JUKE PARTS
You should have been able to slowly grind off the original welds on the shifter arm in order to retain the pin for strength and then flip it and weld it back on. Wanna see how this turns out, hoping it all works out really good. Wanna see more of the Corvette and 3000gt as well.
0:12 cool 240SX but what’s going on with the purple VW Beetle on the lift next to it?😜
Best comment yet!😁
Awesome video, my son told me about it this morning! Amazing you got that engine to fit! Fibra de Carbon!!!!
I'm really enjoying this build. I can't wait to see it move under its own power. Good work Dalt!!
You should drop off the hood with the pieces for the intake box I’m sure they could work some magic to get rid of the hole. Maybe turn the large vent into two separate vents going off to the sides and add a bit of material to the middle
If you bought the Origin 2 hood it would have fitted without cutting, it has a large hump in the center without those vents. It has vents way up near the windshield.
I can’t wait until this car runs and drives. It’s going to be EPIC!! 🫡
Be good to see some kinda scoop cover the hole in the bonnet
Can I get an ls instead of the carbon piece? 😂
Fibra de carbono 😮💨😮💨😮💨
i think you should recolour the seats so they match the interrior not the other way around.. the red accents stand out way too mutch. all black seats would fit mutch better
I agree, even though we would lose the Nismo embroidery. The problem is, the OEM fabric is most likely 99.9% unavailable.
If you guys ever sell the amethyst vr4 pls include the announcement in a video glad to see you actually finish projects haha compared to others
Why not shim the k member like a k24 swap