You may be the most genuine, believable person I’ve seen on UA-cam. I have an APR stage 1 2018 s5, want more, and know nothing. Your content is greatly appreciated. Thanks for being awesome.
I was sort of thinking the same for my wife’s car. She has a 23 Q7 3.0. I’ve got a 2018 S5 but have no clue what the Qs are capable of. What are you thinking for your Q5?
well see i herd there new supercharger isnt putting much more power gains out but well see, apr had there own supercharger and it didnt work out too well but i wanna see what mercs #'s are because ill definitly get one if its putting out more power
Over here in the UK MRC tuning can get a reliable 480hp/590nM from their stage 2 single pulley with no heat exchanger required. For the minimal increase, there is really no need to go to stage 2+ from stage 2 as the costs are pretty inhibitive. I'd only ever advise going stage 2+ from a totally healthy stock unit as it'd be much more cost effective. As for heat exchangers, we rarely get consistent weather that would justify using one all year round, though admittedly it does help keep those IAT's down for those rare really hot days we get here. It's a shame you guys are generally limited to APR/IE/034 tunes which give a lot lower outputs in comparison.
I just found your page earlier tonight and I've watched quite a few videos from a couple years ago till this one. You've come a long way mate 👍 Keep up the good work
My pulley set up Crank Pulley www.ecstuning.com/b-ecs-parts/audi-b8-30t-performance-overdrive-crank-pulley-with-belt-1873mm-for-use-as-crank-pulley-only-upgrade/025510ecs01kt2/ Supercharger Pulley www.ecstuning.com/b-cts-parts/supercharger-pulley-upgrade-kit-without-belt/cts-hw-0133belt~/
@@DynamicDemonRacing do you know if like their stuff works better though cause like you would think their parts would work even better with their tube ya feel me like air pods and iPhones
@@exoinky1293 yes and no for example the 034 supercharger pulley is 57.7mm so is ecs tuning and others, my heat exchanger is from PLM and cost $400 vs other brands that cost $800-$1000 and they both perform the same but 034 test there parts with there tune but it’s all based off things they are already out
Good look bro and they have a nice one but I got a cheaper one I got the PLM one and I haven’t had any problems so far and it was easy to install. They should perform the same I think there the same size too ecs tuning has a nice cheap one too
You may be the most genuine, believable person I’ve seen on UA-cam. I have an APR stage 1 2018 s5, want more, and know nothing. Your content is greatly appreciated. Thanks for being awesome.
thinking about building out my Q5 3.0T into a sleeper. your channel has been super helpful
I was sort of thinking the same for my wife’s car. She has a 23 Q7 3.0. I’ve got a 2018 S5 but have no clue what the Qs are capable of. What are you thinking for your Q5?
your the reason why i got my b8.5 s4 & got the 034 stage 1 tune
What’s ur plans for that beast 🔥 glad u liked the car
034>APR all day! They are the only shop that touches my car!
🔥🔥💪🏽 same here until I see otherwise lol but I don’t see that happening
This is the brother that convinced me to keep the water-meth I was going to return. Now at 683HP, I'm glad I did!
Wow no nice your almost close to 600hp so when Merc racing perfects there supercharger you could easily be hitting 800-1000 hp and crazy tq
well see i herd there new supercharger isnt putting much more power gains out but well see, apr had there own supercharger and it didnt work out too well but i wanna see what mercs #'s are because ill definitly get one if its putting out more power
best sleeper people UNDER ESIMATE S4's!!!!!!
Ive got a stage 1 APR tune, and I cant wait to switch to 034
You’ll notice a crazy difference 🔥🔥
I got a 335 but I need one of those it’s just a V6 Audi shirts 🤣🤣🤣 that was tough
i might sell then but ima keep doing giveaways with them for the time being
I'm looking to grab a c7.5 A7 and going 03. Ya videos got me pumped to burn my wallet.
Burn it 🔥🔥🔥🔥🔥
I only wanted to go stage 1 and here I am lol
Both tshirts are fucking 🔥🔥🔥
Especially the one you were wearing! Gotta represent the raza!
Hell yea good look bro 🔥🔥 I’ll do a UA-cam giveaway soon probably next video I gotta get these recent giveaway winners stuff sent out
Very informational bruh 💪🏽
appreciate it bro
1) Intake
2) Heat exhanger
3) Smaller SP pulley
4) HFC (high flow cats)
5) Cut the mufflers off
Go with 034 motorsports stage 2 ECU + TCU tune
AM I CORRECT?
6) Upgraded throttle body
7) Upgraded HPFP
8) I also upgraded my coil packs.
Merch is 🔥🔥
It’s crazy to think you crashed it months ago and now it sitting right behind you beefed up
Love the videos keep them coming love the progression
I can’t wait to see your 3rd design those first 2 shirts are fyeeeee
Over here in the UK MRC tuning can get a reliable 480hp/590nM from their stage 2 single pulley with no heat exchanger required. For the minimal increase, there is really no need to go to stage 2+ from stage 2 as the costs are pretty inhibitive. I'd only ever advise going stage 2+ from a totally healthy stock unit as it'd be much more cost effective. As for heat exchangers, we rarely get consistent weather that would justify using one all year round, though admittedly it does help keep those IAT's down for those rare really hot days we get here. It's a shame you guys are generally limited to APR/IE/034 tunes which give a lot lower outputs in comparison.
480hp from a single pulley? That's insane
I think that have a lot to do with the lower octane fuels they have there, because here we all tune on 98 octane pump fuel or 98 with ethanol
I just found your page earlier tonight and I've watched quite a few videos from a couple years ago till this one. You've come a long way mate 👍
Keep up the good work
Any1 ran the crackle tune with the cats still in place ?💀🤣034 tune^
My pulley set up
Crank Pulley
www.ecstuning.com/b-ecs-parts/audi-b8-30t-performance-overdrive-crank-pulley-with-belt-1873mm-for-use-as-crank-pulley-only-upgrade/025510ecs01kt2/
Supercharger Pulley
www.ecstuning.com/b-cts-parts/supercharger-pulley-upgrade-kit-without-belt/cts-hw-0133belt~/
Wait so should I look at 034 motor sports parts or different brands
the only thing 034 i have is the tune and motor mounts everything else is different brands it doesnt gotta be 034
@@DynamicDemonRacing do you know if like their stuff works better though cause like you would think their parts would work even better with their tube ya feel me like air pods and iPhones
@@exoinky1293 yes and no for example the 034 supercharger pulley is 57.7mm so is ecs tuning and others, my heat exchanger is from PLM and cost $400 vs other brands that cost $800-$1000 and they both perform the same but 034 test there parts with there tune but it’s all based off things they are already out
@@exoinky1293 another example is the Apr ultracharger throttle body is smaller then 034 SuperDuper throttle body but they have the same power #’s
Great video and info, thanks and keep up the good work 👍
Appreciate it 💪🏽🙏
Does TCU tune fix the jerkiness and hard shifting in low gears? Would it fix the stop and go lunging?
Will that trans hold up or require trans build on stage 2+
all stock trans besides a trans mount insert but itll hold up
Looking forward on the next banger!
Also I was looking to get 034 heat exchanger but what would you recommend?
Good look bro and they have a nice one but I got a cheaper one I got the PLM one and I haven’t had any problems so far and it was easy to install. They should perform the same I think there the same size too ecs tuning has a nice cheap one too
good video!
What heat exchanger do you have?
plm
Nicely done
heard there is cat safe tune for stage 2 and heat exchanger is recommend but not needed?
I NEED THOSE SHIRTS!!!!!!
😈😈 I’ll do a UA-cam giveaway soon
the bee part lmaoo