Great to have someone who explains and teaches remapping because trying to find tutorials else where is like looking for a needle in a hay stack! Or they want you to pay them 4 grand for software so you can load generic maps onto people's cars for their company!
Man it’s simple. You don’t get any tutorials because remaping it’s difficult. You need to study and try to understand the things by your own. That’s why nobody gives information about chip tunning for free. If you go to college, you pay. You have remap courses. Take one, and pay. And after you can remap. Regards
Some interesting and useful information, I was thinking of having a play with the mapping on my TDI. But after seeing your videos it's highlighted how much goes into it and I make just play safe and pay for the remap.
I think that the value written in each field is the fuel quantity in miligrams and not percentage. On my 101hp 1,9 TDI PD Golf 4 on the bottom right of my map it goes only up to 66. At 5000 RPM with 100% TPS it only shows 34. That would be a large change if i edited it to 100 (which is 100mg of fuel). What i dont understand is that in my map when i am in the line of 100% TPS the fuel decreases with increasing RPM. I would think that it should stay the same. This could be a first start to create more power i think.
That's just a safety limit to influence the average driver. By reducing the fueling it encourages them to change gear instead of chasing the rev limiter.
Guys, advice required.. I've always been interested in getting into tuning.. after learning about the MPPs earlier I looked up the best one and had bought a MPPs v18 ready2go ... Got chatting with the seller and he advised it'll be no use to me due to my ECU will be password locked. So what tool or knowledge do I need? If I go get tuned, how do they get in? If a guy comes to my home? How does he do it in the back of a van? Any advice is much appreciated. Cheers
hello! can you please make a video on how to read and remap ecu of the vehicle that is not supported by regular tuners. I have a Hyundai Azera 2006 3.8L and couldn't find any stuff for my car (my car is from Canada). All of the stuff that I could find is European. Thank you!
I am a final year engineering student and my graduation project is ECU's. The company that I work for is a combustion engine manufacturer. The production line contains a test bench to make sure that the engine is functioning in a proper way and my project is within this section. The test bench is for many diffrent engines and for every diesel engine the test bench operator must bring the adequate ECU so that the engine can start, and for that there is a lot of ECU's and a lot of lost time. My goal is to regroup all those ECU's in only one. After some research on the internet I found something called universal ECU. But I do want to know if this ECU can support all engines? Or it's very dependent on the engine's manufacturer, and if it's the case how to adapt it. I also found that the ECU's algorithm is based on MAPs. So can diffrent engines have similar MAP's? I would be very grateful for nay reply, any feedback would be very much appreciated. Thank you very much in advance.
Thanks for the information, but I really don´t know how to take this into my ECU, if you can recommend any program to do it or explain it, that would be great
I'd prefer it if it was 100% pedal all the time. Either go hard or go home. Flat out or get out. My engine is now tuned to binary throttle, off or on. Go or stop. Fuck that fiddling malarkey in-between
I still don't quite understand this thing about throttle response. How can a computer control the power based on my pedal pressure, if my throttle is connected to the pedal with a cable? I would understand if it were a servo throttle... Now, let's say that computer can still decide on how much fuel it will add based on airflow caused by opening the throttle. How can remap improve this? If computer adds more fuel, there won't be enough air to burn it because the throttle is not opened enough. Am I missing something? Or is the computer also controlling valve timing based on airflow and somehow restricts the amount of air entering the engine regardless of the throttle opening (maybe doesn't allow as much as could actually enter)? I would like some help with understanding this. Thanx!
@@vPerformance Ok, but then if you change your wish map to inject more fuel, you must change your servo throttle settings to allow for more air. What difference does it make if you could just press your gas pedal to the ground and ask for more fuel? (I get that ECU may not open the throttle as quickly as you want it, because it determines fuel injection based on RPM) But then, shouldn't it also work on cable throttle? I don't really have to care about the wish map since I could just change MAF map and Torque map to increase fuel injection at lower rev ranges and lower air ranges, to give me more power. Also, I'm not sure, but I think my car (Skoda Fabia 6Y, 1.2 HTP 12v) also has the throttle position sensor even though the throttle is connected with a cable, so it may as well have a wish map too. Did I miss something?
Think of the pedal like a percentage modifier. If your other maps allow for 55 mg of fuel. At 100% pedal you get 100% fuel. Sure, the car might not have enough air to burn it all though, so you'll get smoke out the back and unburnt fuel. You could change so you get max fueling at 50% pedal if you like. You can adjust the feel of the throttle, but not its limits. Make sense?
@@vPerformance Yes, I understand that. I'm pretty familiar with processing information from sensors and coding all kinds of EPROM chips. I'm not a mechanic, however, so I'm trying to get more info on what exactly the car measures and what it can control. I checked for my case and found out that even though my car doesn't have servo controlled throttle, it does have a sensor on the pedal (probably some kind of rotary encoder or potentiometer). I asked my previous question brcause from what I've researched, wishmaps (which rely on gas pedal sensor) usually go well over the maximum stroke fuel limit anyways. But the air map and torque map limits it based on their own parameters. So I'm trying to learn how this works exactly and since I can code EPROM chips, I wanted to intercept signals from these sensors and trick the stock ECU into thinking it's at 3000rpm when it's at 1500 to allow for more fuel. But I want to do this correctly and I would make my own software (for external chip) that would compare stock and custom map and recalculate relations between them in order to trick the stock ECU to behave like a custom map. I can't trick it into giving more fuel per stroke than it's programmed max, but I could trick it to give more at different rev ranges (even stock ECU could allow for more horsepower if there is more fuel per stroke at higher than peak rev range I suppose). I was wondering if you know about some elaborate guide that explans all the sensory connections to the ECU and all the decisions that ECU makes based on those sensors (i. e complete input output diagram) And which software would be the best to joke around with petrol engine and supports Skoda? Thanx! You already helped alot.
I understood some of those words. You're knowledge clearly exceeds mine, for I am neither tuner or mechanic. The only software I've used is edc suite, but I've heard folks using winols too.
Hi, thanks for the videos, I think I have seen all of them, I recently remapped my 110bhp Leon to 140bhp with Vagsuite. Correct me if I'm wrong as I'm still trying to get my head around this. At 1:32 minutes on the video you say at 2000rpm with the throttle down at 16 percent the peddle is requesting 9% of the fuel. Do you not mean 9 milligrams of fuel (after all its the IQ in milligrams being supplied which is shown on the Z axis) The reason I ask is because my Leon's stock map at full throttle around 5000rpm has a maximum of 55 milligrams of fuel and that's its highest value across the whole map. I would be excited to think its value is a percentage because then I still have 45% of power that I've not been using but sadly I think increasing the Z axis to 100 would only give me about 10% more power.
Sharp observation! Yes, the map was showing 9mg of fuel, but I was working on a map where the maximum was 100mg of fuel. It just made it easier to explain. You can request more fuel by changing the injector duration maps, but working out duration-to-mg ratios will be the tricky part. Basically, longer durations with the injector open means more fuel will go in. I doubt you can measure it though, best you can do is estimate.
Is this correct, I don't think it is percent of fuel injected at all. The Z plot it for the amount of fuel in mg/stroke injected so 78 would be 78mg not 78% fuel.....
Man i like a lot your videos, you explain it so well. If you had a contact number where i can get in contact with you it would be awesome.. Cheers and success brother
Missleading video. Driver wish map is the last one to change. No matter how much fuel you set in driver wish map, there is also smoke limiting map, torque limits, boost limits... that's why it's called driver's wish - it's a wish, not a rule.
Great to have someone who explains and teaches remapping because trying to find tutorials else where is like looking for a needle in a hay stack! Or they want you to pay them 4 grand for software so you can load generic maps onto people's cars for their company!
+Dan Rayment I agree! We don't know a lot yet but as we learn we're trying to share for free.
Man it’s simple. You don’t get any tutorials because remaping it’s difficult. You need to study and try to understand the things by your own. That’s why nobody gives information about chip tunning for free. If you go to college, you pay. You have remap courses. Take one, and pay. And after you can remap.
Regards
@@vPerformance i want to remap my 07 nissan AD hr15 engine
Some interesting and useful information, I was thinking of having a play with the mapping on my TDI. But after seeing your videos it's highlighted how much goes into it and I make just play safe and pay for the remap.
Was curious about VAGEDCSuite, thanks for making these videos!
Thank you soo much for teaching us! Keep up the great content!
I think that the value written in each field is the fuel quantity in miligrams and not percentage.
On my 101hp 1,9 TDI PD Golf 4 on the bottom right of my map it goes only up to 66. At 5000 RPM with 100% TPS it only shows 34.
That would be a large change if i edited it to 100 (which is 100mg of fuel).
What i dont understand is that in my map when i am in the line of 100% TPS the fuel decreases with increasing RPM. I would think that it should stay the same.
This could be a first start to create more power i think.
That's just a safety limit to influence the average driver. By reducing the fueling it encourages them to change gear instead of chasing the rev limiter.
More And more And more Please! Glad You are back with the remap vids!
great job brother, thanks for the video easy to understand the concept
hey v, what software do you use for editing ?
Great presenter and wonderfully simple visuals. Sub and a like from this wannabe tunesmith
Thanks - wonderfully simple is also what my girlfriend calls me.
Diesel injector timing explaining crank angle and TDC
Thanks for this video!!!
Please make more, such good info
brilliant video! you need to upload more content!
Guys, advice required.. I've always been interested in getting into tuning.. after learning about the MPPs earlier I looked up the best one and had bought a MPPs v18 ready2go ... Got chatting with the seller and he advised it'll be no use to me due to my ECU will be password locked. So what tool or knowledge do I need? If I go get tuned, how do they get in? If a guy comes to my home? How does he do it in the back of a van? Any advice is much appreciated. Cheers
hello! can you please make a video on how to read and remap ecu of the vehicle that is not supported by regular tuners. I have a Hyundai Azera 2006 3.8L and couldn't find any stuff for my car (my car is from Canada). All of the stuff that I could find is European.
Thank you!
Someone who actually explains ECU stuff in a practical way! What ecu editor are you using?
That one is VAGsuite
vPerformance So i suppose it only works with VAG cars' ECU map?
Ramses No vagauite reads only edc15 iirc
I am a final year engineering student and my graduation project is ECU's. The company that I work for is a combustion engine
manufacturer. The production line contains a test bench to make sure that the engine is functioning in a proper way and my
project is within this section. The test bench is for many diffrent engines and for every diesel engine the test bench operator must bring the adequate ECU so that the engine can start, and for that there is a lot of ECU's and a lot of lost time. My goal is to regroup all those ECU's in only one. After some research on the internet I found something called universal ECU. But I do want to know if this ECU can support all engines? Or it's very dependent on the engine's manufacturer, and if it's the case how to adapt it. I also found that the ECU's algorithm is based on MAPs. So can diffrent engines have similar MAP's?
I would be very grateful for nay reply, any feedback would be very much appreciated.
Thank you very much in advance.
stil no reply lol
Awesome video! But which software is it exactly? I want to start remapping, but I’m looking for the best software for that. Thanks!
Hi great video thanks. could U please advise some tools to work with Peugeot 407 HDi
Thanks for the information, but I really don´t know how to take this into my ECU, if you can recommend any program to do it or explain it, that would be great
I use mpps obd2 cable, mpps v13 for reading and writing to the ecu and vagsuite for editing maps. I believe he uses the same.
Rowan Davies I’ve been doing some research, what about KESS? Ksuite?
@@germangarcia436 I havnt used that, Im only using a £15 cable from Amazon, does the job
Is it possible to remap an OBD-1 ECU (cuch as a magnetti marelli IAW 49f).
If yes, how would one go about it?
What would be the best cable to buy as a beginner?
can you remap my 320d e46??
I'd prefer it if it was 100% pedal all the time. Either go hard or go home. Flat out or get out. My engine is now tuned to binary throttle, off or on. Go or stop. Fuck that fiddling malarkey in-between
Great for rallying, not so great for driving in town.
Bro you have to understand that your life is not GTA V
I wanted to remap my 07 nissan AD with hr 15 engine
I still don't quite understand this thing about throttle response.
How can a computer control the power based on my pedal pressure, if my throttle is connected to the pedal with a cable?
I would understand if it were a servo throttle...
Now, let's say that computer can still decide on how much fuel it will add based on airflow caused by opening the throttle. How can remap improve this? If computer adds more fuel, there won't be enough air to burn it because the throttle is not opened enough. Am I missing something?
Or is the computer also controlling valve timing based on airflow and somehow restricts the amount of air entering the engine regardless of the throttle opening (maybe doesn't allow as much as could actually enter)?
I would like some help with understanding this. Thanx!
This is all about electronic fuel injection. Cable throttle does not apply
@@vPerformance Ok, but then if you change your wish map to inject more fuel, you must change your servo throttle settings to allow for more air.
What difference does it make if you could just press your gas pedal to the ground and ask for more fuel? (I get that ECU may not open the throttle as quickly as you want it, because it determines fuel injection based on RPM)
But then, shouldn't it also work on cable throttle?
I don't really have to care about the wish map since I could just change MAF map and Torque map to increase fuel injection at lower rev ranges and lower air ranges, to give me more power. Also, I'm not sure, but I think my car (Skoda Fabia 6Y, 1.2 HTP 12v) also has the throttle position sensor even though the throttle is connected with a cable, so it may as well have a wish map too.
Did I miss something?
Think of the pedal like a percentage modifier. If your other maps allow for 55 mg of fuel. At 100% pedal you get 100% fuel. Sure, the car might not have enough air to burn it all though, so you'll get smoke out the back and unburnt fuel. You could change so you get max fueling at 50% pedal if you like. You can adjust the feel of the throttle, but not its limits. Make sense?
@@vPerformance Yes, I understand that. I'm pretty familiar with processing information from sensors and coding all kinds of EPROM chips.
I'm not a mechanic, however, so I'm trying to get more info on what exactly the car measures and what it can control.
I checked for my case and found out that even though my car doesn't have servo controlled throttle, it does have a sensor on the pedal (probably some kind of rotary encoder or potentiometer).
I asked my previous question brcause from what I've researched, wishmaps (which rely on gas pedal sensor) usually go well over the maximum stroke fuel limit anyways. But the air map and torque map limits it based on their own parameters.
So I'm trying to learn how this works exactly and since I can code EPROM chips, I wanted to intercept signals from these sensors and trick the stock ECU into thinking it's at 3000rpm when it's at 1500 to allow for more fuel.
But I want to do this correctly and I would make my own software (for external chip) that would compare stock and custom map and recalculate relations between them in order to trick the stock ECU to behave like a custom map. I can't trick it into giving more fuel per stroke than it's programmed max, but I could trick it to give more at different rev ranges (even stock ECU could allow for more horsepower if there is more fuel per stroke at higher than peak rev range I suppose).
I was wondering if you know about some elaborate guide that explans all the sensory connections to the ECU and all the decisions that ECU makes based on those sensors (i. e complete input output diagram)
And which software would be the best to joke around with petrol engine and supports Skoda?
Thanx!
You already helped alot.
I understood some of those words. You're knowledge clearly exceeds mine, for I am neither tuner or mechanic. The only software I've used is edc suite, but I've heard folks using winols too.
Hi, thanks for the videos, I think I have seen all of them, I recently remapped my 110bhp Leon to 140bhp with Vagsuite. Correct me if I'm wrong as I'm still trying to get my head around this. At 1:32 minutes on the video you say at 2000rpm with the throttle down at 16 percent the peddle is requesting 9% of the fuel. Do you not mean 9 milligrams of fuel (after all its the IQ in milligrams being supplied which is shown on the Z axis) The reason I ask is because my Leon's stock map at full throttle around 5000rpm has a maximum of 55 milligrams of fuel and that's its highest value across the whole map. I would be excited to think its value is a percentage because then I still have 45% of power that I've not been using but sadly I think increasing the Z axis to 100 would only give me about 10% more power.
Sharp observation! Yes, the map was showing 9mg of fuel, but I was working on a map where the maximum was 100mg of fuel. It just made it easier to explain. You can request more fuel by changing the injector duration maps, but working out duration-to-mg ratios will be the tricky part. Basically, longer durations with the injector open means more fuel will go in. I doubt you can measure it though, best you can do is estimate.
Cheers for the reply. Keep up the good work and keep the videos coming!!
Hi I'm looking for launch control map for EDC16U31 for a audi A3 2.0TDI and I got mpps but don't know where it is
Is this correct, I don't think it is percent of fuel injected at all. The Z plot it for the amount of fuel in mg/stroke injected so 78 would be 78mg not 78% fuel.....
You're right, I just said the wrong thing
@@vPerformance ok thanks I was just checking before I went and added way too much fuel 🤣 cheers
What software do you use???
first you said u are requesting 9 or 60 % of the fuel, and then u said they were milligrams of injection ....decide...
Ominimicu if ur not happy don’t watch you moron. Maybe you should “decide” to disappear
Thanks a lot
Its requested iq not percentage off pedal
You are absolutely correct. I was talking in % to make it easier to understand.
👍👍👍👍👍👍👍
So your just adjusting the throttle input ?
Yes. More specifically - adjusting how much fuel is injected based on the pedal position set by the driver.
Man i like a lot your videos, you explain it so well. If you had a contact number where i can get in contact with you it would be awesome.. Cheers and success brother
Missleading video. Driver wish map is the last one to change. No matter how much fuel you set in driver wish map, there is also smoke limiting map, torque limits, boost limits... that's why it's called driver's wish - it's a wish, not a rule.
I think I know what you mean, wish maps are variable by their very definition.
Why u always talk about most boring and most unimportant maps?
Because I'm not a very interesting person
It's a pretty important map you clown.
reported
Reported what?
You're doing god's work