in this tune i edited only torque limiter, smoke limiter , iq by map/maf rised limits, soi axes for 60 and 70 mg, edited duration 1,2,3 for 60 and 70 mg, rised boost and atmosferic boost limiter, and rised n75 map in last column to reduce overboost.
Just made this map today on my 6 speed AVF audi, must say it drives like a charm. Can't say about the hp, but on VCDS on channel 20 in engine blocks the torque hits 400nm on 3rd gear pull with gas pedal all the way to the floor, stock it was max 330. Thumbs up for the map.
good video and thank you very much, it helped me for my audi a4 b6 1.9 AWX, I would like you to make a video explaining how to calculate the exact amount of fuel with excel
I more than appreciated this video had .. honestly though - a spoken walk through would have been phenomenal.. this is... These are.. this is why.. now I'm checking etc etc
Hello I have a golf pd130 and I put an EGR suppressor and electronically deleted the value in the egr duty cycle VCDS shouldn't it always be 0 and not vary? mine is always at 19% basically it doesn't vary, it can fluctuate between 4% or 19% or 24% can this be normal?
hi mate i like ur video but u didn't explaine it when u change the value that are to explain like calculating map, can u give us a short explain for soi map,smoke map and boost map?
Im injection duration etc are calculated at 80mg, smoke at 80 aswell as MAF/MAP my peak boost target is 2492 between 2500-3500rpm, is there any room to play with there with boost, mabye same peak boost as yours with N75 table to changed to reduce overboost?
on the new cars you need to change the injection maps, but in your car i don;t think so. i have 1.9tdi awx engine, with egr off kit...i drove like this, almost a year without any problems , now i have the egr map filled with 850mg value.but the car drives the same.
Thanks for good guide. Have a question, are you trying to do maf to map? I have the same engine asz, want to learn tge first steps At beginning i want to egr off and MAF off. Thanks in advance
17 is the afr...with no smoke. I divide mg of air to afr17 ..to obtain max mg of fuel i can burn. And 1.02 its just a value to multipy or decrease map values.
Yes, its safe for stock pd130. I don`t have the file anymore..i just made this tutorial and deleted it. The purpose of this file was to show you how much boost ,duration and other values to use in your file.
in this tune i edited only torque limiter, smoke limiter , iq by map/maf rised limits, soi axes for 60 and 70 mg, edited duration 1,2,3 for 60 and 70 mg, rised boost and atmosferic boost limiter, and rised n75 map in last column to reduce overboost.
How can i get about 1.7bar and 70mg for my asz? Im driving your values now 😅
@@lukasstiftner1167 Max boost with 1749VA is 1.55.
@@elkonelkon5867 I drive it with 1.63 on a ALH engine.
@@lukasstiftner1167and 1749VB
@@elkonelkon5867I run over 2.5bar on mine
Just made this map today on my 6 speed AVF audi, must say it drives like a charm.
Can't say about the hp, but on VCDS on channel 20 in engine blocks the torque hits 400nm on 3rd gear pull with gas pedal all the way to the floor, stock it was max 330. Thumbs up for the map.
You did it by the tutorial?
@@enz0n962 yes, step by step. I also have an egr delete kit, so the egr is turned off too.
@@jorew7which software and hardware do I need to replicate?
good video and thank you very much, it helped me for my audi a4 b6 1.9 AWX, I would like you to make a video explaining how to calculate the exact amount of fuel with excel
I more than appreciated this video had .. honestly though - a spoken walk through would have been phenomenal.. this is... These are.. this is why.. now I'm checking etc etc
Thanks for the file. I Will be learn more
Hi, what should i need to read the original map from ecu and write the remaped file in the ecu.
Do you have anything on alh tdi? I can’t seem to find anything on one
Great video. Why you don't change the driver wish values? Can I use your setup for my polo 1,9 tdi 130 Blt injecteur CD?
where do you get the 510 from when calculating the turbo pressure?
can you make a video please with a software modification for a 116hp ajm and you can get the maximum on the stok turbine !?
What about same engine but quattro do you make other adjustments?
Wow thanks so much, I used this and now my Volkswagen Golf pd130 PULLS LIKE A MOFO TRAIN 🚂!!!
May I ask if you still have her? Any problems since?
Hello I have a golf pd130 and I put an EGR suppressor and electronically deleted the value in the egr duty cycle VCDS shouldn't it always be 0 and not vary? mine is always at 19% basically it doesn't vary, it can fluctuate between 4% or 19% or 24% can this be normal?
How do you to calculate injection duration value?
Hi ! Where i can contact you to buy a remap for my golf4 tdi 130 ?
Do you know how to do switchable maps (multi maps) for edc16u1
hi mate i like ur video but u didn't explaine it when u change the value that are to explain like calculating map, can u give us a short explain for soi map,smoke map and boost map?
Is it same with 2.0 TDi PD140 with 8 valve cylinder head?
hello can i use this tool with vcds cable
Im injection duration etc are calculated at 80mg, smoke at 80 aswell as MAF/MAP my peak boost target is 2492 between 2500-3500rpm, is there any room to play with there with boost, mabye same peak boost as yours with N75 table to changed to reduce overboost?
Torque and drivers wish is 76
Why *510 at 17:40 please ?
Is it possible to just map in some smoke for show rather than going through everything aswell
I did exactly as shown on the video but my awx goes like stock. IQ actual is 51.9 max. And some overboost. Can you help me please?
maybe you forget one limiter , or you edited the wrong codeblock.
@@AnotherCarChannel1 i found the solution. I edited map 02 like you did, but my car goes on 05, so I changed 05 also and now it is working :) thx!
como se en que map esta mi coche?@@xKypQx
Max performance stage 1 or stage 1 soft...?
Hello
how can i flash this to tune to my ecu?
Salut! Ai avut o creștere a consumului semnificativă după ce i-ai făcut softul?
Where do i get die original maps?
And how do i put it on my ECU in the Car
Hello, could you program the ecu control unit for me?
how do you burn this file into the ecu?
HI, i have 1.9 tdi agr. i want to do Stage1. I need to change the injection angles after muffling the EGR valve?
on the new cars you need to change the injection maps, but in your car i don;t think so. i have 1.9tdi awx engine, with egr off kit...i drove like this, almost a year without any problems , now i have the egr map filled with 850mg value.but the car drives the same.
Thanks for good guide. Have a question, are you trying to do maf to map?
I have the same engine asz, want to learn tge first steps
At beginning i want to egr off and MAF off. Thanks in advance
Any Chance you could do a 1.9 tdi pd105 EDC16u34?
when i will buy a car with this ecu i will learn and i will make a video :D
Great video, what happens if I copy these maps on a 1.9tdi pd 115 with injectors nozzle of 1.9 tdi pd 130 hp, I will have any problem?
a mi también me gustaría saberlo..
I'll have to buy a program and adapter. I want to tune at home.
Can i rewrite it with VAGEDCSUIT?
Супер, благодарю за видео!
Всё предельно понятно.
У меня остался вопрос, у меня 4×4, копировать , всё скопировать из codeblok, Manual в 4×4 ?
Hi man i am big fan can u upload your file on link ? :) I create my own by your tutorials tx so much
Can you help me? I dont know where my fault is, But I did the Flash and if I start the car it goes off After a few seconds, I cant Drive
fix the launch control
@ how? I dont have the Option for Launch Control. If I press on activate Launch Control nothing appears in the List
Why do you use 17 to divide and 1.02 to multiply? What does it mean?
17 is the afr...with no smoke. I divide mg of air to afr17 ..to obtain max mg of fuel i can burn. And 1.02 its just a value to multipy or decrease map values.
So if you want to roll coal you should increase the value like 1200/17? Instead of 1100/17?@@AnotherCarChannel1
Would this work for a B6 passat 1.9 ?
BEW i think is the engine . @Another Car Channel
Can you add a link in description to this stage 1 file? Also is it safe for stock injectors, turbo?
Yes, its safe for stock pd130. I don`t have the file anymore..i just made this tutorial and deleted it. The purpose of this file was to show you how much boost ,duration and other values to use in your file.
@@AnotherCarChannel1 okay, thank you, good video
does it work for asz 1.9tdi motors?
Sí
don't change MAF Limiter?
This is stage 1 full...?
What cable do you use?
galletto 1260
Big thank you..
Hi, does it work on 1.9tdi PD130 ASZ?
pd130 is already ASZ pd150 is ARL
Hi! Thanks for your videos! How much do you test 1749va stock turbo? How much do you think is the max pressure it can take, 1.6?
1.65
What is the name of the program please and is it free?
Full remap...?
Cuando cambio los parámetros en la gráfica final me sigue saliendo 130cv por qué puede ser
abajo, donde pone automatic codebank, select codebank 2
Where we can download this program?
where can i download the stock file?
tanks for excelent video, can you sent to me this file?
How did you get edc suite free?
how to download default 1.9 pdtdi 130 file
Hello, i would like to make a Smith map on an EDC 15 P. With Cruise control and clutch pedal
How can i proceed
how tf is this uploaded in 2021 lmao
my IQ MAF is not workin what do I do?????
Hello 4 bar map senzor ?
3 bar
What’s the hp gains
max 30
How do you add hard cut/popcorn limiter
check my videos,i have a tutorial,or you can find the edcsuite version with svrl map and its easier
very bad tuning
Explain
You have help too much , i think you work in NASA , make slowly cursor , don"t make people confuse , Fu......
can i use this tool with vcds cable.
No, vcds is diagnostic, you need mpps to extract file from cars ECU, then tune maps with this program and write it back in ecu