curtis nicejob! Although I noticed that when you placed the blower back in you left the high voltage cables from the Heat strip kit touching the resistance, I think you did not notice that, they might be touching the resistance so when it turns on it might melt the cables and cause a short there.
Hello Curtis, at the costs of parts and labor most techs in my parts would be pushing for replacement unit. Easy ground mount install. I appreciate you always being honest my friend!
That puppy just wanted to play, that's what they do. Nice job on that unit, it needed you so it could be done right. What a pain in the butt where those heater coils are. No filter at all, " is that a problem?". Yes, a problem, but not "the problem". In our minds, "stupid". Good call Curtis.
Those are expensive heat kits to by the way. I put in a Tempstar they never gave me the heater kit, unfortunately I didn’t notice till I got to the job. I ended up having to pay for it twice because the guy at the supplier swore he gave it to me, he did not. I haven’t been back to that place sinsce. I’ve NEVER had any place do that to me before.
Before I would have bolted the fan box up I would have got those wires to the outside of the box on the left side. I would have zip tied those heat strip wires from around the back so they don't get too hot and possibly cause a fire
Those electric furnace heating coils are indeed in sorry shape. That also appears to be a common Carrier design, for the heating element to be on the intake side of the blower. Rather in front of the air stream.
Well i you have a 12 point ratcheting with. 15 degree bend wrench it would be a lot easier than the loggerhead polish wrench 🔧 all you need is standard seizes 3/8 to 7/8 and ur in like flint
Sounds like you've dealt with this customer before. The point being you know the repair needs to be done and what they will approve so you might as well do the repair while your there instead of having to come back later.
Air Filters are just Like Turn Signals on your Vehicle. People think the Manufacturers include them on a Furnace or in a Vehicle just for the Hell of it. 🤪👎
I think the little doggy was asking for help He's wanting to get a hell out of there
IKR, like Curtis said, he needs attention.
Can you imagine if Curtis had a set of wrenches or sockets how efficient he might be!?
curtis nicejob! Although I noticed that when you placed the blower back in you left the high voltage cables from the Heat strip kit touching the resistance, I think you did not notice that, they might be touching the resistance so when it turns on it might melt the cables and cause a short there.
Yup I noticed that also
Poor puppers wanted to play.
I always play with the puppers.
exactly why I don't have a dog anymore I can't give it the attention it deserves
The puppy reminds me of Peanut in MORR; always in the way but just wants attention.
That puppy is in need of tlc than that package unit. Great video.
I think I would have secured the heat strip wires away from the heating elements
Hello Curtis, at the costs of parts and labor most techs in my parts would be pushing for replacement unit. Easy ground mount install. I appreciate you always being honest my friend!
Great job Curtis pup and all thanks for the video
You need a socket for that heater bolt!
Well done job Curtis, it should run for many more years now, after your good attention. You sure made a loyal friend with that nice friendly pup 👍 Au
I hope so
Another great video 👍👍 that puppy really liked you 😂
The wiring from the heater kit seems a bit unprotected. How do you assure all that wiring won't contact the heating coils?
That’s the way it’s made
I agree with you. The wires should have been gathered away from the heating coils.
That puppy just wanted to play, that's what they do. Nice job on that unit, it needed you so it could be done right. What a pain in the butt where those heater coils are. No filter at all, " is that a problem?". Yes, a problem, but not "the problem". In our minds, "stupid". Good call Curtis.
You would think homeowner would ask if the her dog should be taken in house….
Yep. People don’t give a sh*t anymore
He's humming again, he must be happy.😎
Always wonder what kind of music Curtis listens to, from the humming there is no telling 😂
Rock and alternative. Every now and then you'll catch a little bit playing.
Oh I hate those ICP,s where the heating elements are mounted to the blower. I don’t know who’s brilliant idea that was
Those are expensive heat kits to by the way. I put in a Tempstar they never gave me the heater kit, unfortunately I didn’t notice till I got to the job. I ended up having to pay for it twice because the guy at the supplier swore he gave it to me, he did not. I haven’t been back to that place sinsce. I’ve NEVER had any place do that to me before.
Georgia Vs. Ole Miss didn’t start off too good for Ole Miss but things changed. Ole Miss was at Home and the Weather made things difficult. 🤔
Got running good job…..👍
That dog is like a combat drone one upping a helicopter.
Motors are the toughest to get off in general….if with dryers…lol
You are better off with the puppy under the house than under your feet.
Before I would have bolted the fan box up I would have got those wires to the outside of the box on the left side. I would have zip tied those heat strip wires from around the back so they don't get too hot and possibly cause a fire
Those electric furnace heating coils are indeed in sorry shape. That also appears to be a common Carrier design, for the heating element to be on the intake side of the blower. Rather in front of the air stream.
I have customers that say sometimes they need to put the dogs up. I always wish they would put the humans up :(
Great repair curtis 👍✌️
Thanks 👍
Package units sitting in the ground get so ugly inside. Even the condenser of a split system is so much cleaner when its on the roof.
I don’t do TikTok myself. That’s a wide open platform I believe
What are your thoughts on Measure Quick?
Don’t like it
Nice work Curtis.
Thanks!
Well i you have a 12 point ratcheting with. 15 degree bend wrench it would be a lot easier than the loggerhead polish wrench 🔧 all you need is standard seizes 3/8 to 7/8 and ur in like flint
I'd have to ask the owner to put the pup up because he could get into the electrical an cause a short an somthing bad i love animals but safety first
Uh Oh. I see the dreaded receiver ball in place again. I would kill my shins on that
Hi Curtis. Can't U Tube prevent people from stealing your videos or anyone's?
If that is happening and you report it.
Sounds like you've dealt with this customer before. The point being you know the repair needs to be done and what they will approve so you might as well do the repair while your there instead of having to come back later.
Poor dog was starving for attention.
Some people should just be cat owners when you can't give enough time and attention lol... He'll learn quickly how 240 AC feels on a wet nose
It pains me with you getting off the
Squirrel cage blower motor . Maybe if it’s that far down channel locks between motor and blower…
Some people should not have pets
Air Filters are just Like Turn Signals on your Vehicle. People think the Manufacturers include them on a Furnace or in a Vehicle just for the Hell of it. 🤪👎
you could put something on video, so people know its not used on tik tok, sad they doing that to ya.
To help with the ticktock piracy you could watermark your videos
Often imitated never duplicated lol