Having recently messaging aprilia and piaggio. The tail tidy isn't a genuine one. Which voids warranty. But aprilia are in development for a tail tidy for the sr gt. Carbon fiber mudguards etc. Thanks for the video. I was going to get a similar tailtidy to this one until I had the message from aprilia.
@@scottishzoomer I want to change the number plate higher but I’m abit dubious to do it as I’m not to good with electrics. But defo going for the higher number plate looks so much better
@@maxcook7402 there’s really nothing to the electrics, it’s only two wires so you can’t really go wrong. There is actually no legal requirement in the UK to have a numberplate light so you could just do away with it altogether. There is an MOT requirement for a rear reflector (although it would be a pretty picky inspector to fail you on it) but as I don’t need an MOT until 2025 I’ll fit one nearer the time 😉
Great informative video ....Wait till it rains - water will spray up your back like there's no tomorrow ... The original number plate mounting (IMHO) look good (a la Ducati Scrambler) and keeps water spraying up yer back ....
A rear reflector is a legal requirement in the UK. I once owned a Mash motorcycle that had a couple of round stick on ones in the bottom corners of the number plate. Apparently they came in the the country to with out any and had to be added for type approval
Well there are already passenger footpegs, the angular nature of the plastic panelling might make attaching extra footpegs tricky but nothings impossible.
Gracias. La unidad se compró en eBay UK, enlace a continuación www.ebay.co.uk/itm/203833052363?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=lZ24xoNWTEO&sssrc=2349624&ssuid=-jSnAGAAR1u&var=&widget_ver=artemis&media=COPY
Hi, looks like the seller I bought it from is no longer stocking them, however they are still available from other sellers on eBay, here’s one: www.ebay.co.uk/itm/235044841578?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=eE81fGEXS3q&sssrc=4429486&ssuid=-jSnAGAAR1u&var=&widget_ver=artemis&media=COPY
No problem: www.ebay.co.uk/itm/203833052363?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=lZ24xoNWTEO&sssrc=2349624&ssuid=-jSnAGAAR1u&var=&widget_ver=artemis&media=COPY
Hi, I got mine on eBay UK. The seller I bought from is no longer supplying it but it is available from others. This is a listing active today: www.ebay.co.uk/itm/235331633250?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=eE81fGEXS3q&sssrc=4429486&ssuid=-jSnAGAAR1u&var=&widget_ver=artemis&media=COPY
It specifically tells you in the manual that you get with the scooter. But anyway. Look for oil filter for piaggio medley 125 euro 5. The aprilia has the piaggio medley engine. Youll also need to the o ring and seal aswell
Hi, it’s available on eBay: www.ebay.co.uk/itm/203833052363?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=lZ24xoNWTEO&sssrc=2349624&ssuid=-jSnAGAAR1u&var=&widget_ver=artemis&media=COPY
There you go: www.ebay.co.uk/itm/195892123114?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=a5qr2fnqtcu&sssrc=4429486&ssuid=-jSnAGAAR1u&var=&widget_ver=artemis&media=COPY
Great job mate and looks alot better now 🙂
Having recently messaging aprilia and piaggio. The tail tidy isn't a genuine one. Which voids warranty. But aprilia are in development for a tail tidy for the sr gt. Carbon fiber mudguards etc. Thanks for the video. I was going to get a similar tailtidy to this one until I had the message from aprilia.
Will be interesting to see what they bring out, in the meantime I’m quite happy with mine.
Thanks for this vid I’ve just done mine. Perfect
I’m looking to get the bike soon but like you I want to change the number plate higher. Your videos are really helpful thanks keep posting 😂🎉
Thanks very much, glad you found the video useful. Hopefully an oil and filter change video coming next, as soon as the weather improves a bit ❄️
@@scottishzoomer I want to change the number plate higher but I’m abit dubious to do it as I’m not to good with electrics. But defo going for the higher number plate looks so much better
@@maxcook7402 there’s really nothing to the electrics, it’s only two wires so you can’t really go wrong. There is actually no legal requirement in the UK to have a numberplate light so you could just do away with it altogether. There is an MOT requirement for a rear reflector (although it would be a pretty picky inspector to fail you on it) but as I don’t need an MOT until 2025 I’ll fit one nearer the time 😉
@@scottishzoomer thanks for the advice much appreciated 👍
Looks good I like that, well done
Great informative video ....Wait till it rains - water will spray up your back like there's no tomorrow ... The original number plate mounting (IMHO) look good (a la Ducati Scrambler) and keeps water spraying up yer back ....
When its Rain out the original again.😉
Thanks for sharing of ideas
A rear reflector is a legal requirement in the UK. I once owned a Mash motorcycle that had a couple of round stick on ones in the bottom corners of the number plate. Apparently they came in the the country to with out any and had to be added for type approval
Interesting, thanks for the advice
Simple and effective. I'd do it too, looks much better! Nice video 👍
hello do you have the dimension Ø of the handlebar of the scooter please
Do you think i could put some footpegs both side of the motorcycle? Maybe welding it or just sticking it to the bodywork
Well there are already passenger footpegs, the angular nature of the plastic panelling might make attaching extra footpegs tricky but nothings impossible.
Muy buenas qe marca es y donde lo as comprado gracias
Gracias. La unidad se compró en eBay UK, enlace a continuación
www.ebay.co.uk/itm/203833052363?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=lZ24xoNWTEO&sssrc=2349624&ssuid=-jSnAGAAR1u&var=&widget_ver=artemis&media=COPY
hello the link wouldn't work when i tried, is there a problem with the item and if you could send another link thanks.
Hi, looks like the seller I bought it from is no longer stocking them, however they are still available from other sellers on eBay, here’s one:
www.ebay.co.uk/itm/235044841578?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=eE81fGEXS3q&sssrc=4429486&ssuid=-jSnAGAAR1u&var=&widget_ver=artemis&media=COPY
Hello, could you give me the link, i want to buy it please mate ?
No problem:
www.ebay.co.uk/itm/203833052363?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=lZ24xoNWTEO&sssrc=2349624&ssuid=-jSnAGAAR1u&var=&widget_ver=artemis&media=COPY
where can I find this? but it is compatible with the European license plate
Hi, I got mine on eBay UK. Sorry I’m in the UK so not sure what European license plate specs are
@@scottishzoomer ok, thank you very much for information
Can you link the metal piece you used ?
Hi, I got mine on eBay UK. The seller I bought from is no longer supplying it but it is available from others. This is a listing active today:
www.ebay.co.uk/itm/235331633250?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=eE81fGEXS3q&sssrc=4429486&ssuid=-jSnAGAAR1u&var=&widget_ver=artemis&media=COPY
Maybe you know what oil filter to put to aprilia?
I’m afraid I don’t, sorry
It specifically tells you in the manual that you get with the scooter. But anyway. Look for oil filter for piaggio medley 125 euro 5. The aprilia has the piaggio medley engine. Youll also need to the o ring and seal aswell
try Hiflo 183
Hi. Where i can get that bracket?
Hi, it’s available on eBay:
www.ebay.co.uk/itm/203833052363?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=lZ24xoNWTEO&sssrc=2349624&ssuid=-jSnAGAAR1u&var=&widget_ver=artemis&media=COPY
I do not like. It was nicer before
Fair enough, it’s just a choice 👍
Link me the product please
There you go:
www.ebay.co.uk/itm/195892123114?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=a5qr2fnqtcu&sssrc=4429486&ssuid=-jSnAGAAR1u&var=&widget_ver=artemis&media=COPY
Thank you so much. You got a new sub