@@DieDoeDa Nope, it won't split along a precise line like that, might shatter. Looking at the previous video where he shows how to score them, must be scored. Otherwise there's nowhere for the glass to break from.
@@xMeta4x I did this with yarn+lighter fluid +bucket of water some 30 years back. Works without scoring, you just have to create a narrow border zone between the cold and the hot part of the glass, then it'll shatter along that thermal stress line.
Absolutely stunning concept! And great video as always. Every viewer recognises how much passion, soul and - not least - the precision you put into your projects, that makes every documentation of your work so amazing, useful and outstanding! Greetings from Chicago, Illinois. U.S.A.
haha, so uh, it might not have anything to do with the fact that it's a studio producing videos? If it was a workshop not producing videos it obviously would not look as nice...
As a former electrician I love that you used the proper tools and fused your build. I saw too many videos of people creating fire and electrical hazards.
The design is beautiful and the person used mostly proper tools and techniques. Never use solder on an electrical connection. This is even more true when the connection is under stress - such as this project. Never use a screw or any other thread as an attachment point to fasten a wire in place. The fuse should probably be on the power input of the power supply - although one on the load side as well is nice. It looks like the homemade power supply had only a two wire input. With a metal case, it needs to be 3 wire - to accommodate an equipment ground. The only shortcoming mechanically I saw was that it will accommodate only one diameter of bottle.
Absolutely stunning concept! And great video as always. Every viewer recognises, how much passion, soul and - not least - precision you put into your projects and this is why every documentation of your work ist amazing and outstanding! Thumbs up and greetings from good old GERMANY!!!
Wonderful innovation. Love all your equipment (wish I had them). Now we've learned to make plenty of beautiful vases , pen holders etc for the family. Good work.
I saw a similar but much simpler approach in the 1950s in Popular Mechanics and I tried it and it works just as well as the one here. The idea is the same. Score the bottle with a glass cutter or carbide knife as done here. But, rather than build the contraption shown, simply wrap a strand of straight nichrome wire around the bottle on the score line, apply tension (a weight, spring, etc.), and apply electricity - no bottle spinning necessary - and the bottle breaks at the score line. As a note, if you are going to cut a bottle, it is a good idea to have some abrasive handy (carborundum is really good) in order to smooth the edges of the bottle - they are sharp and will cut you.
Magnífico tutorial maestro, la fabricación de un cortador de vidrio por inducción, elevada al máximo nivel, cómo siempre un trabajo impecable y una herramienta que funciona de maravilla, gracias por compartir sus conocimientos y experiencias, un cordial saludo y por supuesto un merecidísimo like desde Narón (Galicia)👌🤓😜
What?! Well the top of the bottle just fell off! What are you doing here? Haha! Very cool...very nice. Yet another one of your amazing and precise creations. I just love your work, sir. Most excellent.
Классная штука. Раньше резал -просто обматывая нихромовую проволоку вокруг бутылки нагревая ей, а затем в воду. Для единичных разрезов хватало. Тут же можно уже серийно запускать резку бутылок.
прекрасная работа!!! не ожидал такого результата. единственное я уверен что он мог бы сделать так что ему просто нужно было бы поставить бутылку и установить размер. с нетерпением ждем улучшения.)
With all these equipments and her workshop, she didn't make a strange device, you can cut the bottle very easily, I wish I had this workshop and this equipment too.
Sehr interessanter Bericht über ein (Fertigungs-)Verfahren, mit dem man übliche Glasflaschen bruch- und splitterfrei schneiden kann. In Finnland hatte ich vor vielen Jahren man von einer Künstlerin einen Glas-Becher gekauft, den die Frau aus dem Bodenteil einer Glasflasche hergestellt hatte. Nun weiß ich zumindest ein Verfahren, wie man solche Becher aus einer Glasflasche ferigen kann.
hai ragione. ma forse esagera un po. si possono tagliare bottiglie a perfezione anche con un centesimo della attrezzatura che usa qui. in una frazione del tempo si costruisce il sistema per tagliare a misura e con il diamante di taglia la bottiglia. poi con una massetta di picchia dal di dentro e la bottiglia si divide. Ma ... a me sta bene che lui faccia di questi ricamini. però non mostra che questo sistema ha una certa erraticità intrinseca. e questo è scorretto secondo me. dovrebbe mostrare anche le volte che i tagli non vengono perfetti. non solo le volte che è venuto benissimo.
Yes, he just "forgot" to show that. I don't know why he don't show it, maybe to make others try this and fail. That way he will seem better than them. Disappointing. Sad impact social media and views have on most people.
Ok. So same idea. Faster and cheper. But less engeneer : wrap a wool twine around the bottle where you want to cut. Put rubbing alcohol on the twine. Light. When the wool and alcohol is burnt, dunk in ice water. (You make micro fracture with a dimond blade too to start) Great video
the bottles are cut with a classic mechanical glass cutter. This thermal cutter is the next step to make the bottle crack exactly in the groove. You can see a groove on the bottles even before they are placed on the hot string.
Нагородил огород не понятно для чего, но наблюдать за работой интересно. На 3 вещи можно смотреть бесконечно: как горит огонь, течет вода и другой работает.:))
@@alexbest5903 Да да, орки делают проще, силикатный блок с зарезом, канавка для спирали и реж бутылки. Только особо одаренные херней маются и майданы ходят с подскоком.
s pervimi punktami soglasen - voda ogon eto da... no smotret na to kak drugoi rabotaet i poluchiat ot etovo udovolstvje... nieznaju eto bole dlia ruZZkix. Drugim narodam eto nieaktualno... mentalitet drugoi.
@@vytautasstravinskas8997 Да, с менталитетом у вас все хорошо. ЛГБТ, однополые браки, замуж сама за себя, зоофилия - это отличный менталитет, в духе гейропы.
video shows that prepared tool is working very Nice , I request to give details of required items to prepare this tool, without all required items ready on hand one can not start to prepare such tool.
Ok. I thought of making one , but you made it before me:) I would humbly suggest putting a SS or other alloy in front of the elements in order to prevent abrasion and long term longevity . Thoughts?
When I think of precision, I think of your channel! I’d love to see how you would build an MFT - similar to what Festool makes, but with your own unique spin. There are so many bad videos on this subject, but very few good ones. Specifically, people build MFTs that are ok for clamping, but not necessarily to be used for square. They never guarantee that their 20mm holes on 96mm centers are accurately placed. Which always makes me wonder why they go through the process of making so many holes if they cannot be used for accuracy? The reality is that accuracy is not easy, but extremely important!
![🔴 EASY CUTTING BOTTLES 👉 HOW TO MAKE a homemade Glass Bottle CUTTER [SIMPLE and EFFECTIVE]](/img/n.gif)
I hope the video is meaningful to you.
If you like the video, please introduce it to your friends and social media !
is there part two? because using heat by itself will not cut the glass as you showed, I am sure you used diamond blade or something similar first.
@@ll-Mark1-ll Agreed, you can clearly see a score mark.
@@xMeta4x On how many of the bottles?
Heat alone works, applied locally.
@@DieDoeDa Nope, it won't split along a precise line like that, might shatter. Looking at the previous video where he shows how to score them, must be scored. Otherwise there's nowhere for the glass to break from.
@@xMeta4x I did this with yarn+lighter fluid +bucket of water some 30 years back. Works without scoring, you just have to create a narrow border zone between the cold and the hot part of the glass, then it'll shatter along that thermal stress line.
Apart from your great project it's so refreshing to see someone on UA-cam who knows how to solder properly!
I'm always deeply impressed by your precision. Great!
Always a pleasure to watch you working, and the results.
Thank you 😊
Absolutely stunning concept! And great video as always. Every viewer recognises how much passion, soul and - not least - the precision you put into your projects, that makes every documentation of your work so amazing, useful and outstanding! Greetings from Chicago, Illinois. U.S.A.
I'm always so impressed how woodshops outside the US are so clean and tidy. As well as the creators manicured hands.
haha, so uh, it might not have anything to do with the fact that it's a studio producing videos? If it was a workshop not producing videos it obviously would not look as nice...
As a former electrician I love that you used the proper tools and fused your build. I saw too many videos of people creating fire and electrical hazards.
The design is beautiful and the person used mostly proper tools and techniques.
Never use solder on an electrical connection. This is even more true when the connection is under stress - such as this project.
Never use a screw or any other thread as an attachment point to fasten a wire in place.
The fuse should probably be on the power input of the power supply - although one on the load side as well is nice.
It looks like the homemade power supply had only a two wire input. With a metal case, it needs to be 3 wire - to accommodate an equipment ground.
The only shortcoming mechanically I saw was that it will accommodate only one diameter of bottle.
That’s so organized and so specific that I can’t stop watching 🙏 👍
Absolutely stunning concept! And great video as always. Every viewer recognises, how much passion, soul and - not least - precision you put into your projects and this is why every documentation of your work ist amazing and outstanding! Thumbs up and greetings from good old GERMANY!!!
I was also stunned by the concept. I have a friend that works at Subway and he too was a bit stunned. Not as stunned as me but stunned none the less.
Brilliant. I've never seen this particular method of bottle cutting before.
So clever and so inventive JSK-k, such a peaceful video to watch⭐️
Wonderful innovation. Love all your equipment (wish I had them). Now we've learned to make plenty of beautiful vases , pen holders etc for the family. Good work.
You've got to love somebody who pre tins wires before trying to solder them together, a mark of a true Takumi.
Great job on the glass cutting jig that is really neat :) Thanks for sharing the video with us!💖👍😎JP
Haven’t got a clue what he’s making, better than any magician, absolutely brilliant, thank you
Todo lo que construyes es detallado, preciso y prolijo.
Además son soluciones prácticas muy ingeniosas y seguras✅
I love your shop clean organized.and all those fantastic tools 👏🏼👏🏼
I saw a similar but much simpler approach in the 1950s in Popular Mechanics and I tried it and it works just as well as the one here. The idea is the same. Score the bottle with a glass cutter or carbide knife as done here. But, rather than build the contraption shown, simply wrap a strand of straight nichrome wire around the bottle on the score line, apply tension (a weight, spring, etc.), and apply electricity - no bottle spinning necessary - and the bottle breaks at the score line. As a note, if you are going to cut a bottle, it is a good idea to have some abrasive handy (carborundum is really good) in order to smooth the edges of the bottle - they are sharp and will cut you.
Magnífico tutorial maestro, la fabricación de un cortador de vidrio por inducción, elevada al máximo nivel, cómo siempre un trabajo impecable y una herramienta que funciona de maravilla, gracias por compartir sus conocimientos y experiencias, un cordial saludo y por supuesto un merecidísimo like desde Narón (Galicia)👌🤓😜
What?! Well the top of the bottle just fell off! What are you doing here? Haha!
Very cool...very nice. Yet another one of your amazing and precise creations. I just love your work, sir. Most excellent.
Awesome! I didn't know I needed one of these until just now.
Amazing work, dude! Really well done! 😃
Stay safe there with your family! 🖖😊
Excellent idea and well executed as usual JSK! 👍👍💥💥
Наблюдать за вашей работой - отдельное эстетическое удовольствие. Продолжайте, пожалуйста! Желаю вам всего наилучшего.
Какой ток подают не подскажете?
@@taechosobaka Это нихромовая спираль, рассчитывать надо для каждой в отдельности, зависит от сечения и длины, такая же спираль в электро плитке.
@@invent5027 , спасибо.
@@taechosobaka их полно на том же Озоне от 800вт до 1.5 кВт. Какая у автора, не знаю. Главное, чтобы до красна - должно хватить минимальной.
@@Inlog2023 , 🤝🏻🙋🏻♀️
Outstanding engineering! Love your videos!
МЕГА ЖУДА ЁКДИ АЖОЙИП РАХМАТ👍👍
You are really surprising, your work and your videos are very precise and clean. I see at least one of your videos every day.
Merci et bravo pour vos excellents tutoriels très clairs et très utiles. Votre travail est remarquable de précision et de propreté. Félicitations.
Que perfeição. Resistência coincindiu com o risco na garrafa.
... gratuliere, ...sehr viele, praktische Bauanleitungen...macht Freude zu gucken, danke !!!
Oh my god you are an absolute genius😮 perfection amazing so clean, I would love your work shop 🥰
Мне очень понравилось!) Спасибо за идею!)
Simple but very effective. Brilliant design. Thanks for sharing.
What a wonderful piece of creation. Thank you for sharing . Greetings from Sydney
I wish all teaching videos were like this
No need talking
Thank you 🎉
Классная штука. Раньше резал -просто обматывая нихромовую проволоку вокруг бутылки нагревая ей, а затем в воду. Для единичных разрезов хватало. Тут же можно уже серийно запускать резку бутылок.
при кручивание бутылки....разве не будеть раздавлены спирал ? спсб
прекрасная работа!!! не ожидал такого результата. единственное я уверен что он мог бы сделать так что ему просто нужно было бы поставить бутылку и установить размер. с нетерпением ждем улучшения.)
With all these equipments and her workshop, she didn't make a strange device, you can cut the bottle very easily, I wish I had this workshop and this equipment too.
I've seen many bottle cutters by heat, but this is the Rolls Royce of them all! Well done.
That's unbelievable. And I thought I had already seen everything. Simply brilliant. Thank you very much for that 👍🏻
Sehr interessanter Bericht über ein (Fertigungs-)Verfahren, mit dem man übliche Glasflaschen bruch- und splitterfrei schneiden kann. In Finnland hatte ich vor vielen Jahren man von einer Künstlerin einen Glas-Becher gekauft, den die Frau aus dem Bodenteil einer Glasflasche hergestellt hatte. Nun weiß ich zumindest ein Verfahren, wie man solche Becher aus einer Glasflasche ferigen kann.
久しぶりに拝見した。相変わらず無駄な動作はなく鮮やか。作るものものも一級品。一体この方は相当の学識と経験を積み重ねたに違いない。料理の腕もかなりと想像する。ただし完璧すぎて奥さまがお困りになると想像する。
Une vieille méthode modernisée par une Adaptation plus moderne et Beaucoup plus Efficace !!
Bravo ! pourbl conception de l Résistance !! 👍🏻👍🏾
i don't know who needs to hear this but there is a difference between "homemade" and having a full workshop inside of your home.
What a great idea! Thanks
That seems to be working really well.
Ola mi amigo bueno el invento pero muchas máquinas y no las hay, gracias de todas maneras que esté bien
Desde riohacha la guajira Colombia
Congratulations!.. Very neat & profetional job!.. Thank you
Excelente video, gracias por compartir, saludos desde Mendoza Argentina.
Muy bonito ,maravilloso ,espectacular y muy nitido . Gracias y felicidades !
Fantastic video, great work professionalism and delicacy. Great virtues of a good professional.👍
Excellent work 👍👍👍 . Thank you for sharing.
Why do I get the feeling this guy could eat BBQ wings without napkins LOL.
Excellent video and not all that complicated.
Nice work!
Hugs from Brazil!
Complimenti, sei un genio, qualunque cosa tu costruisca, è realizzata con una precisione e cura ingegneristica. ...il migliore!!!
hai ragione. ma forse esagera un po. si possono tagliare bottiglie a perfezione anche con un centesimo della attrezzatura che usa qui. in una frazione del tempo si costruisce il sistema per tagliare a misura e con il diamante di taglia la bottiglia. poi con una massetta di picchia dal di dentro e la bottiglia si divide. Ma ... a me sta bene che lui faccia di questi ricamini. però non mostra che questo sistema ha una certa erraticità intrinseca. e questo è scorretto secondo me. dovrebbe mostrare anche le volte che i tagli non vengono perfetti. non solo le volte che è venuto benissimo.
Excelente, el mejor video que he visto de cortadores de botellas
Nice work as always. We shared this video on our homemade tools forum this week 😎
Que capricho!!+ Parabéns! Ótimo vídeo. Grato.
did you etch the bottle with a roller glass cutter before the heat was applied?
Always very good videos👌!
Yes, he just "forgot" to show that.
I don't know why he don't show it, maybe to make others try this and fail. That way he will seem better than them. Disappointing.
Sad impact social media and views have on most people.
@@gsp911 dud, you have a problem
@@woodywood1951 dud, ok
yes very disappointing, i never caught him cheating before, now i am skeptical of all his projects
@@jeremiahbullfrog9288 he does not cheat...
He did show this part of the movie...
Anyway, most of the people understood that...
Brain is creative and idea is narrative ❤😂😂😂😂😂
How do you make your ruler? That is pretty awesome!
Ok. So same idea. Faster and cheper. But less engeneer : wrap a wool twine around the bottle where you want to cut. Put rubbing alcohol on the twine. Light. When the wool and alcohol is burnt, dunk in ice water.
(You make micro fracture with a dimond blade too to start)
Great video
What type of layout square is that you are using? The one that looks like a speed square/carpenter square combo.
Excelente video amigo, para la descripción de los componentes eléctricos, donde lo consulto?, Saludos desde Guatemala 🇬🇹🇬🇹🇬🇹
the bottles are cut with a classic mechanical glass cutter. This thermal cutter is the next step to make the bottle crack exactly in the groove. You can see a groove on the bottles even before they are placed on the hot string.
wow
Don't think so. The "score line" becomes visible only after rotation of the bottle.
Нагородил огород не понятно для чего, но наблюдать за работой интересно. На 3 вещи можно смотреть бесконечно: как горит огонь, течет вода и другой работает.:))
Оркам этого не понять...
@@alexbest5903 да, такое понятно только великим украинцам.
@@alexbest5903 Да да, орки делают проще, силикатный блок с зарезом, канавка для спирали и реж бутылки. Только особо одаренные херней маются и майданы ходят с подскоком.
s pervimi punktami soglasen - voda ogon eto da... no smotret na to kak drugoi rabotaet i poluchiat ot etovo udovolstvje... nieznaju eto bole dlia ruZZkix. Drugim narodam eto nieaktualno... mentalitet drugoi.
@@vytautasstravinskas8997 Да, с менталитетом у вас все хорошо. ЛГБТ, однополые браки, замуж сама за себя, зоофилия - это отличный менталитет, в духе гейропы.
Wow, good Master 👍👍
video shows that prepared tool is working very Nice , I request to give details of required items to prepare this tool, without all required items ready on hand one can not start to prepare such tool.
Кто он такой черт возьми 😀😀😀На всё есть решения, приспособления. Автор молодец 😊
nice work! Hope to see future projects using this device :)
It was great my friend. I enjoyed . . Thankful
Excellent video Great work !
Ok. I thought of making one , but you made it before me:) I would humbly suggest putting a SS or other alloy in front of the elements in order to prevent abrasion and long term longevity . Thoughts?
Amazing tool! I was hoping to see what your thumbnail picture showed…. I thought you where going to see a spiral cut bottle. Great non the less
Muito top, valeu por compartilhar
Идеальная идея. Супер. 👍👏👌✊🤜🤛💪🤝🌟
Я вот не понимаю зачем и для чего резать бутылки?
What are you going to do with the bottles you cut?
Used to make toolboxes, cups and DIY lighting.
In the future, we plan to publish it as a video.
Seen folk make pretty cool drinking glasses out of them and the tops of the bottles into outdoor nightlights, awesome stuff 🙂
You can use them as flower base, most speciallg those bottles of wines
@@jisakukobo
BRAVOoooo,SENSEI!!!!excellent MASTER of ALL,Art SHGUNOBU!!!!!🙏🌅🙏🌅🙏🌅🙏🔋🌿🔋🌿🔋💎👍💎👍✌️🎓✌️🎓✌️
Bonjour, bravo c’est une coupe bien nette c’est super. Très bonne vidéo comme d’ habitude
Merci JSK -Koubou cordialement Michel 2A France 🇫🇷 Corse.
Bonito trabajo. Great idea!
A 10 my friend, you are amazing 🙌🙌🙌
Did you have to pre-heat or cool the bottle prior to cutting?
Ficou excelente
You are amazing as always!
Wie immer, sauberer Arbeitsplatz, perfekte Arbeit
Thank for creating these video. 👍👍
she did a nice job
When I think of precision, I think of your channel!
I’d love to see how you would build an MFT - similar to what Festool makes, but with your own unique spin.
There are so many bad videos on this subject, but very few good ones. Specifically, people build MFTs that are ok for clamping, but not necessarily to be used for square. They never guarantee that their 20mm holes on 96mm centers are accurately placed. Which always makes me wonder why they go through the process of making so many holes if they cannot be used for accuracy?
The reality is that accuracy is not easy, but extremely important!
Waouh. The best way to cut glass 👍🤩👍
Génial bravo !!!!!👍👍👍👍👍
very nice thanks for sharing. I would like to see more details on that vertical panel saw of yours, please.
ua-cam.com/video/K5uAtBWTY3Q/v-deo.html
Genial parabéns!!!👏👍🤌
Amazing! Well done!
What kind of element are you using?
와 대박이네요 열선이 니크롬선인가요?
Great work❤
What are cut bottles and rings for?
bravo maestro!
İzlemesi çok keyifli, tertemiz bir video daha...😊 Böyle yaratıcı videolarınızın devamı dileklerimle. 😃👌👏👏🙌
tnx for sharing, its a great idea. new friend n supporter, stay safe n connected
Geniale Idee 👍👍👍
Mr JSK Koubou .
Please tell us that does birch plywood expand and compress from the weather effect ?