How to fit an integrated dishwasher

Поділитися
Вставка
  • Опубліковано 16 чер 2023
  • In this video I fit an integrated dishwasher, this dishwasher was second hand, so there was no instructions or template for fitting the integrated dishwasher door. Fitting this was difficult, because the plumbing for the property was not fully installed, so there was a 4-inch soil pipe connection under the 900mm base unit, which had to be left accessible for the plumber, this resulted in me fitting the dishwasher, then the 900mm base unit, then the other units on that wall. I then had to fit the worktop and make the cutout for the sink, then remove the dishwasher, so that the 900 base unit could be removed!
    Kitchen fitting basics- • Kitchen fitting basics... Corefix fixings- • Corefix fixings | Fixi... How to join cabinets together- • How to join kitchen ca... Cigman laser level- • Cigman green line lase... Rigifix wall fixings- • Rigifix wall anchors Milwaukee 12v SDS drill- • Milwaukee M12 H | 12v ... Milwaukee 12v drill driver- • Milwaukee C12D review Milwaukee 12v right angle drill- • Milwaukee c12 rad | Ri... Wall plug tips- • How to use wall plugs ... Masonry screws- • Concrete screws | Maso...
  • Навчання та стиль

КОМЕНТАРІ • 43

  • @Dylan32Fleming
    @Dylan32Fleming 4 місяці тому +2

    I don't comment much, but I had to give credit to your directions and voice over. I'm a general builder about to install my own kitchen first time and only worry was the integrated dw, your video made it seem so simple I'm delighted. Will definitely be checking out your other content

    • @ultimatehandyman
      @ultimatehandyman  4 місяці тому

      I’m glad you found the video useful
      Thanks for the comment 👍

  • @darkdepth1991
    @darkdepth1991 11 місяців тому

    I allways love the quality of your videos, every step is so well defined!

  • @BigStew007
    @BigStew007 11 місяців тому +1

    What a neat and tidy job.
    Thanks for all the videos in this series.

  • @djpaulduffy
    @djpaulduffy 7 місяців тому

    That back leg adjustment had me pulling my hair out till I saw this. Much appreciated ❤

    • @ultimatehandyman
      @ultimatehandyman  7 місяців тому

      I'm glad the video helped
      Thanks for the comment 👍

  • @grahambowen
    @grahambowen 10 місяців тому

    Great instructional video I will watch it again before I attempt to fit my dishwasher
    Many Thanks

  • @GaryT1952
    @GaryT1952 11 місяців тому +1

    Beautifully done...and perfect reveals! In the US, most kitchen cabinets are built-in and lacking the easy adjustments that are available in the UK

  • @orlando1a1
    @orlando1a1 11 місяців тому +1

    Nice work - well done, Sean. I can see how door alignment could so easily trigger your OCD!

  • @mnaz8726
    @mnaz8726 6 місяців тому

    Excellent work, beautifuly explained 👏 👌

  • @43bikeguy
    @43bikeguy 11 місяців тому

    Brilliant use of Mammoth tape, great vid as usual

    • @ultimatehandyman
      @ultimatehandyman  11 місяців тому

      Mammoth tap is absolutely awesome. I’ve used it hundreds of times and without it, some jobs would have been almost impossible 👍

  • @ultimatehandyman
    @ultimatehandyman  11 місяців тому +1

    Fitting this was difficult, because the plumbing for the property was not fully installed, so there was a 4-inch soil pipe connection under the 900mm base unit, which had to be left accessible for the plumber, this resulted in me fitting the dishwasher, then the 900mm base unit, then the other units on that wall. I then had to fit the worktop and make the cut out for the sink, then remove the dishwasher, so that the 900 base unit could be removed!
    I hope everyone has a great Father’s day Sunday 😉

  • @davidwilson5073
    @davidwilson5073 11 місяців тому

    superb video as usual

  • @SuccessShared
    @SuccessShared 9 місяців тому

    Great job. What about fitting the kick plate?!

  • @craig5832
    @craig5832 6 місяців тому +1

    My setup is exactly like this one except the 300mm unit is missing so the dishwasher butts up to the tall unit. Do you think there will be enough space above an integrated dishwasher to add a support for the worktop, or do I need to get an additional base end panel against the tall unit end panel? Thanks! This is my first kitchen install and the only thing I am struggling with atm. I have not received my dishwasher yet

  • @ruionwriting
    @ruionwriting 2 місяці тому

    Quality content.

  • @liftfan2
    @liftfan2 7 місяців тому

    Brilliant.

  • @darrenmackenzie1892
    @darrenmackenzie1892 9 місяців тому

    Another way thats easier tgan the instructions. One question did you nit put the 2 metal hooks on the door??

    • @ultimatehandyman
      @ultimatehandyman  9 місяців тому +1

      No, mine was second hand and did not have any hooks 🤔

  • @dewaltpowertools
    @dewaltpowertools 11 місяців тому

    That'll do. thanks

  • @brianmac001
    @brianmac001 11 місяців тому +1

    The metal plates at the top are normally for screwing the dishwasher to the under side of the worktop. If it's a stone worktop, there are holes (usually with caps) on the sides at the front to screw the dishwasher to the side cabinets on both sides.
    A tip for when adjusting the rear foot is to try & take the weight off the rear foot by tilting the appliance slightly forwards while turning the screw as the screw & connecting tod are plastic & easily broken/stripped.
    Finally, the door fixing kit usually comes with 2 metal brackets that screw onto the decco door & hook into the dishwasher door at the bottom, while side brackets that screw onto the sides of the decco door are held in place by adjusting screws (behind plastic caps) on either side of the dishwasher door.

    • @ultimatehandyman
      @ultimatehandyman  11 місяців тому +2

      Thanks for the detailed information. I thought the metal plates at the top were for screwing into the worktop, but they could not be used with the handle-less trim.
      Thanks again for the comment 👍

    • @brianmac001
      @brianmac001 11 місяців тому

      I work in white goods & come across these all the time. The metal plates can be removed if you're not going to use them - it can save sore fingers!

  • @oliverbarrett2478
    @oliverbarrett2478 6 місяців тому

    I have the same issue 2nd hand dishwasher. The tape is rubbish ..... I'll degreesed and dryed prior to just falls off. Thought that it wouldn't stick 😂

  • @binnsbrian
    @binnsbrian 11 місяців тому

    How do you install that dishwasher if the countertop is installed? It must be hell. How would you install the top panel?

    • @ultimatehandyman
      @ultimatehandyman  11 місяців тому +1

      You would have to put the dishwasher in position, then mark the height of the top panel. Remove the dishwasher and then install the top panel using some L brackets, fitted from below. Like you say, it will be difficult 👍

  • @garvielloken3929
    @garvielloken3929 11 місяців тому

    Ace!

  • @TapelessDrywallFinishing
    @TapelessDrywallFinishing 11 місяців тому

    👍👍

  • @nickayivor8432
    @nickayivor8432 11 місяців тому

    Enjoy your Sunday. Thanks for sharing it. Take care, Ultimate Handyman
    👍
    SUBSTANTIAL Ultimate Handyman
    From Nick Ayivor from London England UK 🇬🇧 ⏰️ 08:17am Good Morning 🙏 🌄

  • @jensschroder8214
    @jensschroder8214 2 місяці тому

    You forgot to put the door handle on.

    • @ultimatehandyman
      @ultimatehandyman  2 місяці тому

      This kitchen is a “handle-less kitchen”- there are no handles on anything 😉