Excellent description, couldn't be clearer, thank you. So much better than the instructions provided by Bosch which are confusing. Bosch should direct everyone to your UA-cam link and reward you financially for your endevours.
This is our second K-Classic. We had our first one for many years, so when we had to replace it, we wanted nothing else but this exact ua-cam.com/users/postUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf model. We use it for about three people everyday in the morning. The taste and quick brew is one of the reasons we like it so much. There are so many choices of brands of coffee that we would grab what was on sale and test the different brands from there. I would definitely recommend trying different brands of coffee to find the ones you like the most because there are brands that quite frankly taste horrible.
This is a very helpful description. However I suggest you miss fitting the velcro tabs as they make the fine alignment of the pre-drilled holes very difficult. It's much easier to hold the door in place until fixed with a looped rope or string around the top of the door. This allows you to make the fine adjustments to align the pre-drilled holes.
No mention of the rubber sheet supplied. No mention of the tabs cut from the rubber sheet which are supposed to be installed under the fascia hanger brackets.
@@user-zi4jk5oh6z what is the purpose of that rubber and if its not attached what could get wrong . Another question is if the metal part in step one is not attached to the board as well
These are the instructions from Bosch only not hidden behind qr codes…It’s frustrating they do not provide written instructions with the machines..Instead of those pictures..
Thanks for the video. I'll never understand why they don't make the door articulate a bit upwards and outwards so that it doesn't clip the kick trims, so you wouldn't have to cut an unsightly notch out of it.
The apartment I'm going to move into has never had a dishwasher before. Is there something I have to do in order to connect it that isn't in this video? Since I assume this is for modern apartments.
amazing !!! so the only option for plinth cut out is to have unfinished, chipped a jig saw rough cut surface ?? and there's no way to calculate that and pre-cut ?? amazing quality !!!
Anyone know what the large sheet of rubber that the instructions say to stick along the bottom of the door (before the panel goes on) is for? And what to do with it once it is on? Can't see any instructions. Just tuck it behind the toekick when that goes on?
Hi and thanks a lot for the video it’s very useful! Is it possible to open the door before installation? We still didn’t install it and we can’t open it, thanks!:)
My dishwasher did not come in with bracket for panel ready installation of the bottom panel. Min 9:43 in this video. What is the name of this part? Where is can be purchased?
One question that your manual and videos don't address regarding the metal plate that is attached to the underside of the worktop; is that supposed to be attached to stone/granite worktops too? Surely one would not be nailing into granite. Is it just for wooden worktops, to protect them from the steam?
what is the purpose of that rubber and if its not attached what could get wrong . Another question is if the metal part in step one is not attached to the board as well
Just installing are kitchen now and have a Bosch dishwasher. As we bring the dishwasher to the front to line up with the other doors, big gap at back between dishwasher and wall. Best way to fix this, put a block of wood between them?
1:42 Those small plastic "cups" are for what reason? Should I use them somehow to screw dishwasher to adjacent cabinets and how? Or they are just put inside without any special reason?
Salve,ho appena montato una lavastoviglie Bosch,ma ho il problema che quando apro la lavastoviglie sbatte nel battiscopa.Esiste una soluzione o devo tagliarlo? Grazie
0.08. All the polystyrene packaging is white except a grey piece across the top back which seems to fit flush with the top. It has a bin with a big X through it. Does that mean don't throw it away and leave it there when fitting? Removing it just exposes a pointless looking bit of metal frame.
This is a thin piece of metal that was pressed into the foam packaging that surrounded the dishwasher. I think it may have something to do with preventing steam /moisture that can impact the underside of the bench top when the door open to allow steam to exit for drying. I have stone bench top so was unable to use anyway. The instruction sheet shows examples of different bench tops and attaching. Hope this helps.
@@adamnikodem5280 I’ll try to replace it with something else if there isn’t another application for it other than just steam protection. Thanks for replying
@@mariuszklin6433 you can also just apply some liquid water proofing membrane to the bottom of the cabinet if it is made of timber, that way you can apply it under a large section and the steam will never damage the timber.
@@johng2732 thanks for that idea. I’ve added plastic film but it doesn’t look good as it started loosing shape (I guess due to temperature). I’ll try your idea next
www.winnings.com.au/public/manuals/SBV8EDX01A-Installation-Guide.pdf if you go to this link and scan the QR code it will show you all the animations, the poster just combined them all together... refer to section 12 for the side screw, this is the link to the missing animation plus.cliplister.com/tools/decryptor2.phtml?a=12cc44d5b72fba66e10fcb22edf03a1682ccfb2eeefb1c64b2b16c14be6fdc9ac2c23211c5ca2b154c2915b50012bb59b&b=81514
On left side of my full integrated dishwasher, there is a some white plastic part and we don't know what is that. Can we install dishwasher with or without that somehow?
why would bosch give him dosh? bosch are the one's who put these animations together.. If you scan the QR codes on the installation guide for the door panel you can view these animations
They are spacers. You insert them in and need to find the correct angle positions to adjust for snug fit between dishwasher and furniture walls. You will be bolting the dishwasher to the kitchen furniture with bolts (from inside the dishwasher) through these spacers.
Thanks for the very nice video. One thing you did not mention, and I would like to say, is that Bosch does not include in the package the two screw nuts for fixing the dishwasher on the side cupboards (at least for my model SMV46KX04E, I guess also for the rest). They shamelessly informed me that I have to pay an extra 8€ and receive them in 10-15 working days. Again, this is for a 500€ fully integrated dishwasher😂. After that, I'm not buying even a screw that carries the brand name of Bosch ever again.
tHERE'S NO lines coming out the back of mine ,i bought it used 2008 i see some integration on the side but can't tell where the second line is? there's one long line but it must be the exhaust line?
Brilliant. Much clearer than the instruction sheet shows. Helped me a lot thanks
Brilliant Goran, this is a task I am preparing to do in the coming weeks. You managed to take out the fear of doing it - thank you Thumbs👍
Thanks indeed, I struggle with instructions and this saved me a ballache👍
This is the Best, Very Neat and Clean Demo, I had seen few more today and this is best one for clear instructions. Thanks a Lot
Fabulous video. Thank you for taking the time to prepare it.
If you don't work for Bosch, they should hire you. This video was so helpful! Thank you.
The original clips come from Bosch and are linked with QR codes in the instruction manual, he just put them together.
@@boldvankaalen3896 and we should appreciate his work. 👍
That was incredibly helpful and a pleasure to watch. Thanks for putting this together!
That was excellent...so easy to follow and why can't all manufacturers do things like this ...!!!!! Thanks for sharing...
the manufacturer is the one who made this animation
This is done so well!! Thank you so very much 👌👍👏
What a wonderful explanation! Thank you a lot!
excellent video and animation..thanks a lot. greetings from Slovakia.
Hi Jan. Watching this in US. Love the band Hrdza. Don't understand the language but appreciate the Slavic soul.
Great animation! I like it
Excellent description, couldn't be clearer, thank you. So much better than the instructions provided by Bosch which are confusing. Bosch should direct everyone to your UA-cam link and reward you financially for your endevours.
Legendo.....spasio si mi Dan🙏🫡
Odlican Video👏👏
Excellent ,like others it was the rubber sheet supplied we were unsure of.But thank you for the video
I can't tell you how much I was happy when I find this instruction on internet. Finally I can do add wooden front to machine.
D😮 😮 no
Great video, better than most on here.
Thanks for the video... Excellent video 👌.. great job..👏👏
This is our second K-Classic. We had our first one for many years, so when we had to replace it, we wanted nothing else but this exact ua-cam.com/users/postUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf model. We use it for about three people everyday in the morning. The taste and quick brew is one of the reasons we like it so much. There are so many choices of brands of coffee that we would grab what was on sale and test the different brands from there. I would definitely recommend trying different brands of coffee to find the ones you like the most because there are brands that quite frankly taste horrible.
Thank you for this public service, most helpful.
thank you for uploading this
Excellent video! Tools - check! 6 pack for later - check! Geronimo!
many thanks, very helpfull, great job 👍
This is excellent!
Great video. Life saver :)
This is a very helpful description. However I suggest you miss fitting the velcro tabs as they make the fine alignment of the pre-drilled holes very difficult. It's much easier to hold the door in place until fixed with a looped rope or string around the top of the door. This allows you to make the fine adjustments to align the pre-drilled holes.
Really clear. Thank you.
No mention of the rubber sheet supplied. No mention of the tabs cut from the rubber sheet which are supposed to be installed under the fascia hanger brackets.
Bro yes this rubber sheer goes where?
@@nektarin83It is used at the bottom of the dishwasher, it's mentioned at the end of the manual.
@@user-zi4jk5oh6z what is the purpose of that rubber and if its not attached what could get wrong . Another question is if the metal part in step one is not attached to the board as well
Good luck on that.
May be better than trying to get through to a competent member of staff within Bosch.
Far better than the instructions provided by Bosch. Thank you
These are the instructions from Bosch only not hidden behind qr codes…It’s frustrating they do not provide written instructions with the machines..Instead of those pictures..
Beats the paper plans hands down.thanks mate
Is there any further adjustment of the front panel once it has been screwed to the dishwasher door?
Розетка рядышком с водой- такое мы любим
😂
Fantastic !!!!
Thanks for the video. I'll never understand why they don't make the door articulate a bit upwards and outwards so that it doesn't clip the kick trims, so you wouldn't have to cut an unsightly notch out of it.
Strange how lower end brands manage to do it.
@@MrLuke6593 which ones are you referring to. Thanks 👍🏻
CytqcxxxtzDZzzsaa
Pp
Very clear explanation. The mounting materials to place the frontpanel is all included or it has been bought seperal?
Nice one, thanks for doing this!
doing what? these animations came from bosch
In step 6, wouldn't it be better to mount the back aquastop cable first, so that the front cable does not stand in the way?
Many thanks.
The apartment I'm going to move into has never had a dishwasher before. Is there something I have to do in order to connect it that isn't in this video? Since I assume this is for modern apartments.
Explicit
Nice
Thanks
😊
i dont get that step 3. What are the plugs for left and right for?
amazing !!! so the only option for plinth cut out is to have unfinished, chipped a jig saw rough cut surface ?? and there's no way to calculate that and pre-cut ?? amazing quality !!!
thank's, gracias, grazie!!! 👊
Anyone know what the large sheet of rubber that the instructions say to stick along the bottom of the door (before the panel goes on) is for? And what to do with it once it is on? Can't see any instructions. Just tuck it behind the toekick when that goes on?
That’s the insulating plate that helps with sound insulation. Did you figure out what to do with it once it’s on?
awesome
Top👌
Hi and thanks a lot for the video it’s very useful! Is it possible to open the door before installation? We still didn’t install it and we can’t open it, thanks!:)
My dishwasher did not come in with bracket for panel ready installation of the bottom panel. Min 9:43 in this video. What is the name of this part? Where is can be purchased?
One question that your manual and videos don't address regarding the metal plate that is attached to the underside of the worktop; is that supposed to be attached to stone/granite worktops too? Surely one would not be nailing into granite. Is it just for wooden worktops, to protect them from the steam?
Only for wooden tops, stone is not endangered by steam.
cool nice!!
what is the purpose of that rubber and if its not attached what could get wrong . Another question is if the metal part in step one is not attached to the board as well
What do I need to do with the dampener Fleece?
Just installing are kitchen now and have a Bosch dishwasher. As we bring the dishwasher to the front to line up with the other doors, big gap at back between dishwasher and wall. Best way to fix this, put a block of wood between them?
why does it matter if there is a gap? you dont see it and the dishwasher gets screwed to the sides of the cabinet so it cant moved backwards anyway.
How do you install this if you have a marble counter top, instead of an mdf one?
Hi Goran where can i get a template for siemans dishwasher SN66p150gb/97 i looked online but cannot find one?
TOP!!!!
Where is the metal piece that fits above the wooden panel that is used as the opening handle.
1:42 Those small plastic "cups" are for what reason? Should I use them somehow to screw dishwasher to adjacent cabinets and how? Or they are just put inside without any special reason?
Salve,ho appena montato una lavastoviglie Bosch,ma ho il problema che quando apro la lavastoviglie sbatte nel battiscopa.Esiste una soluzione o devo tagliarlo? Grazie
Спасибо)
0.08. All the polystyrene packaging is white except a grey piece across the top back which seems to fit flush with the top. It has a bin with a big X through it. Does that mean don't throw it away and leave it there when fitting? Removing it just exposes a pointless looking bit of metal frame.
Wow nice 220-240V right near the water, EPIC This is not possible.
how tall is the plinth?
Anyone knows what this piece is at the beginning you need to nail to the worktop? I had it missing in the packaging so I’ve installed it without one
This is a thin piece of metal that was pressed into the foam packaging that surrounded the dishwasher. I think it may have something to do with preventing steam /moisture that can impact the underside of the bench top when the door open to allow steam to exit for drying. I have stone bench top so was unable to use anyway. The instruction sheet shows examples of different bench tops and attaching. Hope this helps.
@@adamnikodem5280 I’ll try to replace it with something else if there isn’t another application for it other than just steam protection. Thanks for replying
@@mariuszklin6433 nope it's just for steam. They have these aluminum one or a sticker.
@@mariuszklin6433 you can also just apply some liquid water proofing membrane to the bottom of the cabinet if it is made of timber, that way you can apply it under a large section and the steam will never damage the timber.
@@johng2732 thanks for that idea. I’ve added plastic film but it doesn’t look good as it started loosing shape (I guess due to temperature). I’ll try your idea next
nice video but i think its missing part when you bolt dishwasher on sides with bolts
thought the same!
Reason I came here :D
www.winnings.com.au/public/manuals/SBV8EDX01A-Installation-Guide.pdf if you go to this link and scan the QR code it will show you all the animations, the poster just combined them all together... refer to section 12 for the side screw, this is the link to the missing animation plus.cliplister.com/tools/decryptor2.phtml?a=12cc44d5b72fba66e10fcb22edf03a1682ccfb2eeefb1c64b2b16c14be6fdc9ac2c23211c5ca2b154c2915b50012bb59b&b=81514
@mifo1133 have you found aby video or instruction how to do IT?
@@Nurofen-lg1fr no but this video is fine except addd two bolts on sides on dishwasher
On left side of my full integrated dishwasher, there is a some white plastic part and we don't know what is that. Can we install dishwasher with or without that somehow?
I did not understand step 3 (Exactly between 1:55 to 2:00).. What is that kept on the top of wooden slab ?
What do I do when my door doesn't open before putting the skirting
Bravo majstore, jel moraju gorenje da se seku cokle, vidim da elektroluks ne moraju bosh da?
Za BOSCH ipak moraju malo da se seku cokle ako je standardna visina elemenata
@@goranzezelj6789 ja imam 84cm od poda do ploce, jel bi onda moglo bez seckanja cokle?
Ako imaš 84cm onda moguće da nećeš morati seći, jer ja imam 82cm i prosekao sam nekih 15mm@@adse327
What about d switch and waterpipe
Wow..thanks so much for uploading....this is exactly how instructions should be given...did you do the animation ?
the manufacturer made these animations, the poster has simply taken them and posted them on youtube
If it's works with IKEA BODBYN ?
No
how do you open the door please ? i can't !
Just pull the door a little harder, don't be afraid, you won't break anything
Hope bosch gave you some dosh
why would bosch give him dosh? bosch are the one's who put these animations together.. If you scan the QR codes on the installation guide for the door panel you can view these animations
Did any of you have trouble fully opening the door with the rubber sheet installed?
Yes and he forgot that the hose for drain water can not never face down.
What is the purpose of these 2 pieces? 1:47
They are spacers. You insert them in and need to find the correct angle positions to adjust for snug fit between dishwasher and furniture walls. You will be bolting the dishwasher to the kitchen furniture with bolts (from inside the dishwasher) through these spacers.
Что делать у кого профиль гола? Не подходит этот образец
Thanks for the very nice video.
One thing you did not mention, and I would like to say, is that Bosch does not include in the package the two screw nuts for fixing the dishwasher on the side cupboards (at least for my model SMV46KX04E, I guess also for the rest). They shamelessly informed me that I have to pay an extra 8€ and receive them in 10-15 working days. Again, this is for a 500€ fully integrated dishwasher😂. After that, I'm not buying even a screw that carries the brand name of Bosch ever again.
Great engine passed away after 4 years 😅😅😅
Грубое нарушение техники безопастности!!! Электрическая розетка расположена близко к водяным точкам!!!
4:16
Не правильное подключение!!!! Нельзя подключать на прямую к сифону, слив должен быть отдельно!!!
Музыка заёбывает🤬🤯
Русские здесь!😂
thanks.
tHERE'S NO lines coming out the back of mine ,i bought it used 2008 i see some integration on the side but can't tell where the second line is? there's one long line but it must be the exhaust line?
👍👍👍
Есть неточность в описании, в наборе никогда не бывает винтов для крепления фасада в количестве 6 штук, их всегда 4 .👎