Make Your C8 Corvette Look Like A SUPERCAR! Side Skirt And Splitter Install! 😲
Вставка
- Опубліковано 14 лис 2020
- 🏆 HPO merchandise here: rebrand.ly/HPO-Merch
📩 Send me some cool stuff 📩
HorsePower Obsessed
P.O. Box 292
Murrysville, PA 15668-9998
▬▬▬DETAILING PRODUCTS I USE▬▬▬▬
Meguiars Gold Class Soap: amzn.to/30oEmud
XPEL Ceramic Boost: amzn.to/33EjFhe
Meguiars Synthetic Spray Wax: amzn.to/2Efsz99
Meguiars Microfiber Towels: amzn.to/2UpJMSm
The Rag Company Microfiber Towels: amzn.to/30HZflz
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
As an Amazon Associate I earn from qualifying purchases.
▬▬FOLLOW ME ON SOCIAL MEDIA ▬▬
👉 INSTAGRAM: HorsePowerObsessed
👉 FACEBOOK: HorsePowerObsessed20
👉 TWITTER: HPObsessed_
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
▬▬▬2019 CORVETTE ZR1 MODS▬▬▬
ACS XL carbon flash front/rear guards - amzn.to/2Qa0UgB
ACS blacked out side markers - amzn.to/2UhxKdv
ACS rear bumper diffuser fins - amzn.to/2QbEr2m
ACS rear fascia extensions - amzn.to/2O4nrJi
Blackout Tail Light Lens - amzn.to/2X8fR3K
5k LED license plate lights - amzn.to/2UjtMBm
5k LED cargo area lights - amzn.to/2UjtMBm
Skip-shift eliminator - amzn.to/2PoaI10
Motul RBF 600 brake/clutch fluid - amzn.to/2rkWJiK
McGards black chrome lug nuts - amzn.to/2Ung3tl
Black TPMS cap and sleeve - amzn.to/2roWvra
Blendmount radar detector mount - amzn.to/2QLrZ91
Blendmount mirror tap hardwire kit - amzn.to/2rx8GlR
Escort MAX360C - amzn.to/3oc9ckB
Sandyeggo Dash Storage Bin Buddy - amzn.to/2WZmSm2
Sandyeggo Seat Belt Stay - amzn.to/2X37QvJ
Cabin air filter - amzn.to/2XUAoXx
ProClip phone mount
5% XPEL PRIME XR window tint
XPEL ULTIMATE PLUS PPF
XPEL FUSION PLUS Ceramic Coating
▬▬▬▬▬▬GARAGE TOOLS▬▬▬▬▬▬
Race Ramps: amzn.to/2KXEgpr
Race Ramps extensions for low cars: amzn.to/2URuxWa
Lug nut sockets: amzn.to/2DE1BpU
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
▬▬▬2018 COLORADO Z71 MODS▬▬▬
Black Chevrolet bowties front and rear - amzn.to/2UBh40L
LED switchback turn signals - amzn.to/2Eq6Qvl
Chevrolet all weather floor mats - amzn.to/2PykFZW
RC 30" curved BLACK light bar - amzn.to/2PySz2f
RC hidden light bar mounts - amzn.to/2GNIfRm
Chevrolet Grille (Part # 84431359) - bit.ly/2Jh0Ffu
2" RC leveling kit - amzn.to/2IT1VEF
Black exhaust tip - amzn.to/2VAGgZv
Matte black steering wheel vinyl - amzn.to/2LINmq8
Black license plate frame - amzn.to/2YvIcj4
Blendmount radar detector mount - amzn.to/2rxHuTP
Blendmount mirror tap hardwire kit - amzn.to/2rx8GlR
Escort Passport MAX II - amzn.to/2UcW6rO
Center console tray/organizer - amzn.to/2MF1b5P
LED brake lights - amzn.to/2Xs63QI
LED 3rd brake light - amzn.to/2Exj30j
Vanity light LEDs - amzn.to/2UxS61R
Stubby antenna - amzn.to/2u3Fi7V
OEM fender flares - amzn.to/2u2EH6f
Interior lights changed out to LED - amzn.to/2G8FzP5
Interior anti-slip/rattle liner kit - amzn.to/2D3rlvw
Red/Black Z71 decals - amzn.to/2Y49HAW
OEM fender flares - amzn.to/2u2EH6f
Front air dam removed
GM OEM side steps
Painted red front tow/recovery hooks
HID headlight kit
LED fog light bulbs
More to come....
▬▬▬MY RECORDING EQUIPMENT▬▬▬▬
GoPro Hero 8 Black: amzn.to/3opYKGQ
GoPro Suction Cup Mount: amzn.to/2riOWCi
GoPro Dual Battery Charger: amzn.to/2EfJ4SH
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
#HorsePowerObsessed #C8Corvette5VM #C8Corvette #C8Corvette5W8 #Corvette #C8 #MidEngineCorvette #CorvetteStingray #2020Corvette #C8Z51#HPO #Z51 #ChevyCorvette - Авто та транспорт
Do you love this look as much as I do? Get your 5VM or 5W8 splitter/side skirt set here: www.aerolarri.com/hpo.html
Do they have rear spoiler options yet?
Looks amazing! I love the Carbon Flash Metallic :) +1000 points on that C8!
Car looks fantastic
Thank you!
Now all you need is the high wing 👌🏼
That may or may not be sitting in my garage 🤫
Pro tip, drill , install pop rivit as u go
I miss seeing this stingray on your channel
She was definitely fun while she was here but the Z06 is just another animal!
Well, she looked good for the trip! Everyone sees a little bit more why we're so XPEL crazy.
Agreed! I would have never considered taking that car for that amount of miles without the XPEL!
That side skirt would really go well with the Victor Racing self adjusting canards, don't you think?
That increases the profile by a factor of 100👍👍👍🙏🙏🙏
Thanks! I definitely agree!
Looks awesome. Mean and aggressive. Definitely brings a super car appearance.
Thanks, man! I appreciate the feedback.
Good day Justin; congratulations, the C8 is looking awesome; take care !
Thanks!
love the side skirts. they would look awesome with my smart active wing!
Good job friend you have the link of the side skirt. I like those..thank
I’m into that red and black thing too! Lol.
lol yes you are! 👍👍
I finally made it to the Podium. No. 3, but I'll take it!😉
Still a solid turnout! 😁👍
As long as I can still "step" it's always a win. Like "stepping" into and out of the Vette.😁 Glad you're all back home. Stay well.
That looks FANTASTIC! Awesome!
Thanks a bunch!
Looks like fun. I mean, not really but at least it was a quick install. At least for us watching. Lol.
You guys with bad tools is still easier than me with the best tools ever. 🤣
The skirts and splitter look great! Definitely worth doing.
Thanks, Jason! Definitely took longer than the video suggested but I was determined to get it done!
I’m new here… What is “Expel”?
XPEL is a paint protection film that does exactly that. Stops rock chips, scratches, etc. You can get it in 2 major different variants. Clear and in this case, stealth which leaves a satin finish to the paint.
I made the right choice to stop editing my next UA-cam video to watch this! Looks amazing!
Thanks, man!
Looks amazing 👏
Thanks!! 👍👍
looks good
Thanks!
Looking awesome!!
Thank you!
Looks so damn good man!
Why thank you, good sir!
LOOKS GOOD BOSS
Thank you!
Wish we had a blackout tinting company here in Dallas. Looks very respectable!
The most respectable I've ever seen. I wish there was more of them as well because it's a shame anyone has to deal with the low end places. Shoot me an email and I'll see if there's anywhere in Texas that Josh (owner of Blackout Tinting) recommends.
Good video and informative
Thank you!
Good job
Thank you!
What a brilliant idea. What C8 owner would not want a grill to protect against road stuff.
sniperwolf
Did you drill the hole install into the side fender or not worry about it
Do you have update on side skirt is it holding up ok because you did not drill hole
It's been absolutely fine. No problems at all.
Thanks for the response about to do my c8 I did not to drill hole
You're very welcome!
Man that looks great Chevy kissing the boat.
Agreed. This car looks way better with this kit.
Looks great, like the 1 piece splitter way better than the 3 pc version. Side skirts look great too. Our C8 3LT Torch red in transit now. Should be soon.
And can get a very good working air rivet gun at Harbor freight for about $60.00. We have used one in our shop for years popped off thousands of steel rivets. FYI
I'll invest in one for sure!
Did you ever have trouble not drilling the hole
Nope. Still isn't drilled.
Well not going to drill mine
Hey Justin.
Would love for you to feature my car on your channel.
I have one of the first Pro Chargers being installed in 3-4 weeks on my C8
Let me know man.
Dude, I'd love that! Are you in PA?
Buy a Clecko tool and some of the fasteners in 1/8 and 3/16. It will make this type of work so much easier and you will avoid misalignment issues and get a better result every time!
So.....how much is this kit?
2,700.
Justin, is there any advantage to putting the expel on the splitter before the install?
Just not having to drive with it on the car unprotected but usually this makes the installation harder when it isn't attached to the car.
@@HorsePowerObsessed Thank you. Love the channel. Just got my 23 HTC. Loving it.
Thank you and congratulations! You’re going to love it!
Team work ftw!
Heck yeah, man! Thanks for the help! 👍👍
What does expelled mean?
XPEL is a paint protection that makes sure your paint stays in great condition regardless of rocks, scratches, etc.
In one week iam gone have mine body kit for my corvette
Nice! You'll love it! Completely changes the look of the car.
Not feeling the incomplete design of the side skirt... should carry to the front and blend with side skirts
"I'm not going to drill into my car."
Drills into car
lol I knew someone was going to point that out. To clarify, I didn't want the holes to be visible if the side skirts ever had to come off. The hole on the side would be huge and quite visible where the ones under the rockers can't be seen regardless.
@@HorsePowerObsessed lol! I like the new look they bring to the ride
I agree! Definitely needed.
The Grill i am talking about DOESN'T Drill into anything it is help by miracle tape. The Grill is placed on to protect your C8 from road crap. Sorry if I didn't make myself clear.
Man Chevy missing the boat, those look awesome 👌
Thanks, man!
Looks great. Are both the factory and aftermarket front splitters made out of fiberglass?
Factory is plastic.
you have the same eye and haircut as street speed 717
Thanks? I think. 🤷♂️
Justin are your side skirts holding up without drilling/bolting in? Any noticeable movement at high speeds? I really don’t want to drill mine too. I will still use the double sided tape and ribits underneath. Thanks for great videos!
That car looks stunning are you going to do the rear diffuser?
Thank you! Is there an after market diffuser available?
Does that decrease the front end lift ?
It does not.
C8 corvette itself looks like a supercar
Gotta say, you look like shade tree kids working on their go-kart on these side skirts. Cleko fasteners guys ... google it. Make your job lots easier. Great look installed!
I don't really see how the Cleco would have helped other than just holding it in place which I had a person do for me anyway. Once they are installed they sit way too low to leave them in there.
Watching you operate the drill was pretty freighting. You should have put a bit stop or at least tape on the bit to stop you from possibly running the bit too far and punching a hole in something. The C7 had some lines running under the car that you don’t want to drill thru. Looks nice.
Thanks! I've done this enough that I'm pretty good at stopping it before it goes too far. 👍👍
🤣🤣🤣
Its awesome as usual for your channe, but the original GM products for aero are wind tunnel tested for downforce. Are these only aesthetic? Side skirts provide a sucking into the pavement downforce while breaking up turbulent air at high speed when configured that way.
These are modeled exactly after the oem skirts. Same shape and size so I would imagine they'd be good for aero as well.
My set should be arriving this week. I'm not drilling into the side of the car either. What size holes do you drill into the underside for the rivets? 3/16"? I assume the front splitter is the same holes?
That is all correct. 👍👍 Send me some pictures after you get yours installed.
@@HorsePowerObsessed Will do!
Can anyone please explain to me exactly what EXPEL does and where it should go on the car??
XPEL is a paint protection film that stops rock chips and scratches from affecting the paint. It can go anywhere that is painted.
@@HorsePowerObsessed where can I get it and does it have to be professionally installed? And how long does it last?
What do u do after u pop the rivet in? U skipped that part. Do u dremel off the piece hanging down ?
Part of the rivet gun snaps off the stick part after it's tight.
HorsePower Obsessed cool, thanks. I’ve never riveted anything before.
I mean, it already does....adding some exterior pieces doesnt take away from the preexisting design.
That's debatable but this is why the car community is so awesome. Everyone has their opinions so we all have something that is genuinely ours.
I'm curious. How are the side skirts holding up with out bolting on the side to the vette (i.e did not drill a hole) 6 months later. I'm installing soon, and do not want to drill a hole, but heard they eventually come off if you do not drill the hole. Thank You.
I haven't had any issues so far. I will be switching to the ACS Composite side skirts soon and drilling the hole soon, though!
Hi there, did you PPF your ground effects parts ?
Yes I did. 👍👍
Does he know he can lower it with factory coils? Looks like it’s in off-road mode.
Do you know that front end lift cars take more than that to lower it?
Yeah you just need the collars from Cicio or Paragon to do it. Lots of videos and forums on that. Think the paragon ones are only 100 bucks. Do it and it will look sooo much better!
I already have them, buying them is not the hard part... I get asked on a daily basis if my car is already lowered so it must not look that bad. 🤷♂️
My man, you are playing Need for Speed in real life with the customization💀
That's a fantastic comparison. The underground series probably started me on this path lol
Your C8 is not a Z51?
Yes it sure is. 👍👍
I will never drill to my C8
The side-skirts appeared to be mounted too far back. There was visible red in front of each side, and then it appeared to "hang off" into the rear wheel well. Did this come with a template for positioning?
I read your comments prior, and you commented the factory ones are plastic... I was under the impression they were carbon fiber, then left visible carbon, or carbon flash black painted?
They are not mounted too far back or hanging off. Not sure what you are seeing unless you were talking about before they were actually mounted. The red part of the tape is removed once they are mounted to the car, before then they were just being mocked up to the car. They can only mount in one place, no room for movement. The factory lip is plastic, this one is fiberglass as are the side skirts.
Here is a video showing how to install a C8 Chassis Brace that prevent body flexing and the tape popping off: ua-cam.com/video/aRKTOO3fETE/v-deo.html
Looks so damn awesome .... How much did u pay for it
For the C8? I got it for MSRP which was 82k. Contact Klick Lewis in Palmyra, PA to get on the list for one. They sell them at MSRP with no markup if you get an allocation from them.
@@HorsePowerObsessed thank u but I was asking about front splitter and rocker panel
The more I see done to C8’s, The more I miss corvettes. .... would love ❤️ to be able to order a New C7
Looks fantastic, congrats and have a great trip. Just wondering if it would be better to use install rivnuts and screws instead of rivets for the side skirts. It would take longer but makes its easier to remove/reinstall if needed. Oh well enjoy.
Thank you! Didn't think of rivnuts.. might be interesting.
Getting famous off of comments day 172, so I can live the dream, live life to the fullest🤙🚀🤙
Heck yeah!!! 🤘😎🤘
Not sure how the blue tape came into play on this. In a future vlog could you please take a minute to explain that area on the car.
I did explain it in the video. I marked the areas where the double sided tape on the sideskirts contacted the car so I knew where to wipe the adhesion promoter.
@@HorsePowerObsessed I did see that. I guess what I am confused about is the distance between the side skirts and the body. I assumed that it did not touch the body. But now that I think about it that was obviously incorrect. Oh well. Thanks for making me think a little harder. Keep the vlogs coming.
No problem man! Thanks for the support!
@@HorsePowerObsessed So you are taping that part to the body? Will that area behind those wings for lack of a better term, trap little stones and grit and be difficult to clean?
No it won't. There is still about an inch and a half back there that you could get a rag into if you had to.
I'm not crazy about the looks of it.
Really? What don't you like?
I think it is the way both pieces terminate with the "flare". With-out that part of the design i really like the shadow lines and detail it adds.
Great content. In my opinion the add on just looks okay. But looks alittle better on a black c8.
I have seen them on a c8 in person( you just know its not an original part, something looks off).
I prefer the ones from Chevy, they just looks better in my opinion especially on bright colors c8s.
And the c8 is already a super car in my opinion. it does everything you expect from a base super car like the mclaren 570s easily with more tech.
The C8 looks like it was created from the supercar trash bin...
Yes, looks very nice. Since you were honest about ease of installation, why not share that this kit is $4,999. In fact, why do you rarely share pricing of items you are promoting. I think that is extremely important information.
This kit is not 4,999. It's 2,700. It's the fiberglass kit. I always provide the links for the products I install. 👍👍
@@HorsePowerObsessed Please post link. I matched your kit # to that on the site. Could not find your $2,700 price. Regardless, why don't you state pricing?
I provide the links which provide pricing. 👍👍
@@marcg1964 www.aerolarri.com/hpo.html This is the link he posted. Says $2,700 for the FRP kit. lol
But what is “expell” ? I hate it when you guys make assumption which end up with questions where we can’t find answers. Please stop doing this !
XPEL is a protective film to stop rock chips and scratches on your paint. I have a lot of videos showing it’s benefits on my channel.
I just don’t care for the C8. It’s all about the C7.