Great video Dan! I've not used my bind-it-all for about 5 years and had completely forgotten how to use it. This video was exactly what I needed, so I'm glad it's still here 9 years after you published it.
Thank you so much for this video! Every other video shows how to use it, but they don't cover specifics like you did with the wire (what direction to put it in and how to position it in the Bind It All when you close the wires). This was a huge help!
Great video. I haven't used it in years and you helped me to complete a project with ease. THANKS FOR GOING SLOWLY TOO. It's nice to follow instructions when someone isn't talking fast. Thanks again.
Excellent instructions - clear, concise, easy to follow. My Bind-it-All has had minimal usage but now I'm faced with a project that requires PERFECT binding. With your video tutorial, I feel confident I can do it. :-) Thank you very much.
This was so clearly explained - thank you for making this. I couldn't figure mine out and threw it in a drawer years ago. Now I'd like to get my supplies and bind-it-all back out and give it a go.
Lovely clear instructions and you explain about wire sizes which none of the American ones I've watched do. Glad I have discovered you, now to find more of your videos.
So clear and easy to follow. I liked your tip on making the template. I always forget which end goes throughout the pages and this showed the answer clearly. Thanks for your help.
I have watched a few of these tutorials and yours is the only one that was clear and easy to follow! Thank you for saving me so much time and headache!
I didn't know what a bind it all was at first and I thought that it was going to be something extremely complicated, but you are clear, concise and informative in your video, thanks so much!
how i wish I had watched this before I used my machine the first time!! What was I thinking????? Would have saved me so much time. Thanks so much. Now I get it.
Perfect demo - very easy to understand and to follow - thank you for posting this video. This is the best I've seen and I'm looking forward to seeing more from you.
Thank you for doing this tutorial, I have been wanting to get a bind it all but was not sure how it really worked, you made it look so simple. Off to the craft sore I go
Great video! Other videos I've watched about Bind-It-All are way too confusing! Thanks for sharing this video. I might just have to get a Bind-It-All now-thanks to your video!
Great vid Dan ...... Nice clear easy instructions. I follow you on UKS and love how you take the time to explain things properly! Carry on the good work,, us crafters need people like you lol XX
hey! I didn't know you had youtube videos it's nice to put a voice to the blog lol I love your free SVG files, I'm off work sick so I can't afford to buy any now but I love your work it's fantastic :)
Thank you for this video, what I've seen so far this is a very good video on how to use this machine. Is wonderful machine though, I'm working on a project and I'm just dying to have one of this. Thanks for sharing :)
Also, the lines are extremely confusing. Are the guides supposed to line up with corresponding lines in the owire binding closing channel? And why don't the lines go straight across, but instead the front middle lines (have the measurements 5/16, 3/8 etc..), but lines are curved on each side. I don't understand.
Hello, I know this thread is old. However, I have a few questions. Please answer. I have the Binditall v2. How are the owire guides supposed to be placed inside the owire binding closing channel? When I tried to place the guides, the lines corresponding to the measurements, did NOT line up for several of the guides. Could the measurements and/or lines inside the owire binding closing channel, be misaligned. Therefore the measurements are inaccurate? Please advise. Thank you.
That's a tricky one - 7cm is an awkward size and you'll have to be very precise not to catch part of a hole on one of the edges. I'd suggest cutting a piece of scrap card to the same size as your page and draw a line at 3.5cm, down the centre of the card. Place that in your bind-it-all, with the line going through the middle of one of the hole markers on the top of the machine and punch. If the holes are correctly positioned, place your template on top of your pages and punch them in the same way. If the holes AREN'T exactly centred, you'll know how much to adjust when you punch the real pages. I hope that helps. I actually cut a scrap to 7cm myself and went to try it, only to find that my bind-it-all is playing hide and seek!
It was a 12" strip of cardstock, around 3" tall. Really, it doesn't matter what size you make it as long as it's wider than your project (so you can be sure you're not cutting any 1/2 holes at either end) and pokes above the machine when you put it in to punch.
Hi Dan, I been searching for an hour to find a video tutorial to explain how to punch more than 6 holes. your's is deffo the best one. thank u so much ((-:
10 років тому
Hi! How do I punch only 3 holes in a 6" page centrally?
so happy to find this 15 years after it was published! It was a life saver!!
Pulled my Zitter out today after not using it for YEAR's and went looking on UA-cam, You made this so simple for me. Thank You!!!!!
Oh, joy, to find someone showing how my new machine works!
After ruining an entire strip of wires, I found your video. Well done and my next try worked perfectly - thanks so much.
This is the best instructional on the bind it all that I have seen. You speak clearly and not too fast and it it was very informative. Thank you!
I believe you have just save my life. At least all my future scrapbookingprojects. Thank you!
Great video Dan! I've not used my bind-it-all for about 5 years and had completely forgotten how to use it. This video was exactly what I needed, so I'm glad it's still here 9 years after you published it.
Life saver ! I had not used my Bind It All for years and had forgotten, thank you for such a great tutorial.
Thank you so much for this video! Every other video shows how to use it, but they don't cover specifics like you did with the wire (what direction to put it in and how to position it in the Bind It All when you close the wires). This was a huge help!
Great video. I haven't used it in years and you helped me to complete a project with ease. THANKS FOR GOING SLOWLY TOO. It's nice to follow instructions when someone isn't talking fast. Thanks again.
Great tutorial. I have had my bind it all for a few years and this is the first time I understood how to use it. Thanks!!!!
Thank you for this tutorial! I wanted to purchase a bind it all but had no idea how it worked. Thank you!
Excellent instructions - clear, concise, easy to follow. My Bind-it-All has had minimal usage but now I'm faced with a project that requires PERFECT binding. With your video tutorial, I feel confident I can do it. :-) Thank you very much.
Thanks so much! The video did exactly what it said, explained the basics better than any other video I've seen. Your video is very much appreciated.
This was so clearly explained - thank you for making this. I couldn't figure mine out and threw it in a drawer years ago. Now I'd like to get my supplies and bind-it-all back out and give it a go.
just got a bind it all and this video has made everything much clearer - thanks you!
This is the best bind-it-all demo I've ever seen. Thanks SO much--I finally know how to use the wires the RIGHT way.
Lovely clear instructions and you explain about wire sizes which none of the American ones I've watched do. Glad I have discovered you, now to find more of your videos.
I have watched loads of Bind it All videos, this one is BRILLIANT, so easy and clear to follow. I have now mastered it!!! Many thanks
Finally someone explained this in a way I can understand. Thank you so much.
The best explanation I saw. Simple, clear, as it should be. Thank you.
This machine was driving me crazy! Thank you soooo much!!!!!
So clear and easy to follow. I liked your tip on making the template. I always forget which end goes throughout the pages and this showed the answer clearly. Thanks for your help.
What a GREAT video!!! I was able to follow and now I will be able to punch more than six holes and still have a nice looking book.
Thanks Angela
Excellent! I’ve watched so many videos, and this is the first one that’s made sense. Thank you!! You’re a natural teacher.
One of the best videos on the Bind It All machine I've seen. Thanks
I just got one of these, so this is FANTASTIC information, thank you!
I have watched a few of these tutorials and yours is the only one that was clear and easy to follow! Thank you for saving me so much time and headache!
Great video - Just got my bind-it-all and your video simplifies everything. Thanks!
I didn't know what a bind it all was at first and I thought that it was going to be something extremely complicated, but you are clear, concise and informative in your video, thanks so much!
how i wish I had watched this before I used my machine the first time!! What was I thinking????? Would have saved me so much time. Thanks so much. Now I get it.
This is a perfect video you explain and show each step. thank you!!
Perfect demo - very easy to understand and to follow - thank you for posting this video. This is the best I've seen and I'm looking forward to seeing more from you.
Oh my god, thank you you're a life saver. The instructions in the booklet made no sense
best bind it all video I have viewed- thank you
Great demonstration. I have used mine before but needed a refresher.
You are awesome sir! Best tutorial out there! Thank you for sharing, now I'm not afraid to try out my bind it all.
The best tutorial I have seen yet!!! Thanks,
Lori
Thank you for doing this tutorial, I have been wanting to get a bind it all but was not sure how it really worked, you made it look so simple. Off to the craft sore I go
Great video! Other videos I've watched about Bind-It-All are way too confusing! Thanks for sharing this video. I might just have to get a Bind-It-All now-thanks to your video!
What a great tutorial clear instructions and so easy to follow I have just purchased a Bind it all so this is so useful
Thank you
Thank you for your tutorial! It made it so easy to successfully complete my projects!
Thank you for a great tutorial. Clear and very helpful.
so glad this was here! the CD I have is not compatible with our DVD player!!! Great, clear demo!!!
awesome tutorial! Explained everything so clearly and simply!
thanks for sharing, very instructive! i love the slow way you explain the tutorial, thanks!
Excellent tutorial, thank you so much! Now I feel much more confident about buying one of these :)
Such a good clear video. Thank you so much!
Great job, dan, you made my day! Thank you so very much!
Kind regards Sigrid
Great vid Dan ...... Nice clear easy instructions. I follow you on UKS and love how you take the time to explain things properly! Carry on the good work,, us crafters need people like you lol XX
You made this so easy to understand and follow. AWESOME video and TFS
hey! I didn't know you had youtube videos it's nice to put a voice to the blog lol I love your free SVG files, I'm off work sick so I can't afford to buy any now but I love your work it's fantastic :)
Thx so much! Short and very clear video, just the way i like it, thx!!!!! 😅
Awesome tutorial. Thank you so much for the precise detailed instruction.
Awesome tutorial! You present it all very clearly. Thanks! :)
best tutorial ever.. Gosh, so simple. thank you!!!!!
THANK YOU THANK YOU for the easy instructions that even I can follow!!!!
very very good clear instructions. will come to review when need to. thank you again
Thanks for this tutorial!
Thanks for sharing this video! It helped me out greatly! :)
Thanks, you explain so clearly.
perfect and very clear instructions ❤
Excellent tutorial! Thank you so much :)
great tutorial. Thanks!
this was a very helpful video! !! thank you!
excellent tutorial!
Thank you for this video, what I've seen so far this is a very good video on how to use this machine. Is wonderful machine though, I'm working on a project and I'm just dying to have one of this. Thanks for sharing :)
I'd like to punch these square notches into old hardbound book covers...will this work for such thicknesses/hardness.? Thx
Gracias por este tutorial, está todo muy bien explicad.
Thank you!
Thank you much, a brilliant, clear, precise Tutorial.
Just bought a Bind-it-all ... the written instructions are rubbish.
Off to be busy.
great video. thank ou.
GREAT VIDEO. TFS!!!!
Do you know how to make your own Owires? I can't buy the size and colour I want, but I've got a fair bit of wire. Can you help?
I've just bought a second hand Zutter Bind it All.
Well explained
I would have liked to see a 11 x 8 - 1/2 page punched!
Also, the lines are extremely confusing. Are the guides supposed to line up with corresponding lines in the owire binding closing channel? And why don't the lines go straight across, but instead the front middle lines (have the measurements 5/16, 3/8 etc..), but lines are curved on each side. I don't understand.
Hello, I know this thread is old. However, I have a few questions. Please answer. I have the Binditall v2. How are the owire guides supposed to be placed inside the owire binding closing channel? When I tried to place the guides, the lines corresponding to the measurements, did NOT line up for several of the guides. Could the measurements and/or lines inside the owire binding closing channel, be misaligned. Therefore the measurements are inaccurate? Please advise. Thank you.
nice easy tut...can you do one that has the inside pages that are smaller than the cover? thats when i get frustrated
Thank you Dan!!! very well explained tutorial!
Thanks for sharing... LOL : )
grazie!
If my project is just 7 cm and I just want 5 holes, what do I do?
That's a tricky one - 7cm is an awkward size and you'll have to be very precise not to catch part of a hole on one of the edges. I'd suggest cutting a piece of scrap card to the same size as your page and draw a line at 3.5cm, down the centre of the card. Place that in your bind-it-all, with the line going through the middle of one of the hole markers on the top of the machine and punch. If the holes are correctly positioned, place your template on top of your pages and punch them in the same way. If the holes AREN'T exactly centred, you'll know how much to adjust when you punch the real pages. I hope that helps. I actually cut a scrap to 7cm myself and went to try it, only to find that my bind-it-all is playing hide and seek!
thank U so much!!!!1 I squished my fingers with mine.. Wished I had watched this first..:O)
What was size was the white page template?
It was a 12" strip of cardstock, around 3" tall. Really, it doesn't matter what size you make it as long as it's wider than your project (so you can be sure you're not cutting any 1/2 holes at either end) and pokes above the machine when you put it in to punch.
dan99stamper Thank you! :)
Hi Dan, I been searching for an hour to find a video tutorial to explain how to punch more than 6 holes. your's is deffo the best one. thank u so much ((-:
Hi! How do I punch only 3 holes in a 6" page centrally?
I'm afraid I can't think of a way you can do that with the Bind-it-all. I don't think it's possible, but if someone else knows better, let us know!
Ok, thanks!
dan99stamper you would have to use a crop-a-file or big bite punch for that few# of holes :)
Crop a dile?
extremely helpful! TFS!!!