How To Stamp a Wall Inside and Outside Corner
Вставка
- Опубліковано 6 кві 2020
- How to stamp a concrete overlay wall inside and outside corner shows you step by step how to stamp inside and outside corners when applying concrete overlays to walls, fireplaces, barbecues, outdoor kitchens and more.
- Навчання та стиль
Very nice finish! Perfect work. Thanks for the video
What a great video. You are very skilled as this is not near as easy as you make it look. I do have a question. You have your wall framed with what looks like a 1x2. Is this for temporary structural strength or as a guide to keeping an even depth?
Saludos désde México, buenis videos y hojala pusieran suptitulos en español seria bueno.
amazing
Fantastic! Please, where do you sell these molds? Do you have a link? Send to Brazil? Thanks.
Excellent
Good job..
Can this be done at an external parge coat on the foundation?
Hi where can I buy one of them stamp pads? You do great work
Where can I buy the product?
I want to do this to a CMU wall that is exposed to the elements, is this possible to do so?
I’ve a feeling this could really take off over the next several years. There are a lot of wood siding homes in the southwest and northwest that need to be retrofit for the increased fire risk they are facing. From what I’ve been able to find so far, it looks like stucco is going to be the most cost effective added cladding for many of them. But not everyone likes the look of stucco. This gives some great alternatives. Install mineral wool board and a class A fire house wrap then this reinforced by 2 layers of spider-lath - massive improvement! (The Australians might be interested too). It looks like it’d ride out an earthquake reasonably well too.
Where do you get the Stamp? No one has told me... I have watched 5 video ,so far. ..Thank you.
I want to buy these stamps please let me know where I can get them?
Desde Perú mil puntos hermoso 😂
How much would you normally charge this for sq/ft?
I want to buy the stamps please let me know where I can get them?
What’s the cost comparison by using this method on a commercial job? Cheaper or more expensive? Compared to cultured stone
Depends on the Stone Veneer...but in most cases it is cheaper and fewer steps. If you are applying at average 3/4" stamp depths...averages $2.00 to $2.50 per sqft for a custom stamped and colored look...and you can do more in one day than with stone veneer so you have a time savings as well. If you are doing a brick look...you are only at about 1/4" and its closer to $1.50 to $1.75 per sqft.
Can this be applied over T1 11 wood siding?
yes and no to that...no, not directly, and yes but you have to use lath
Is there anyway to add different colors to the stone
You can get a die to add to the mix but that would be for the full section of mix you use . Or can you stop 3 to 4 different batches A different color mixes.and add them in Patches on the wall, but it will more likely mix. Or you can pain the Individual breaks to whatever color you want it to be
Nice job mate well done 👌do u send that mold to Australia?
We can...its a bit pricey with the freight though.
@@stoneedgesurfaces3959 no probs,looks great
@@stoneedgesurfaces3959 hi do you deliver the mold to Ontario, Canada? Thanks
What's your cement mix ratio please.
sorry...proprietary
Nice one!Whete to buy that?
Send me your email address and what state you live in to bruce@stoneedgesurfaces.com and I'll send you a catalogue and the closest Distributor to you.
Where can we buy that stamp ?
We make them...just send me your email address to info@stoneedgesurfaces.com and I'll send you a catalog and price sheet. When you are ready...just call the number on the brochure and we will help you out.
What's your cement mix ratio great tips.
Make a corner stamp
ابراهيم
This is cement or what
Whats the name of this stamp
That is our Mountain Dry Stack Stamp Set
@@stoneedgesurfaces3959 hi I love your video, can you let me know where can I buy this mold, thanks 😊
@@hkathy522 send me an email at bruce@stoneedgesurfaces and let me know where you are located...city or state and I'll send you a catalogue and where you can buy close to you.
How much is for ur classes pls
Our classes are free if you come to a factory training. Our Distributors charge around $100 if you go to their facilities and they give you the $100 back on your first purchase.
Stone Edge Surfaces
Hi I want this product at India state Kerala my number 8086609609
@@stoneedgesurfaces3959 Is there any facilities in southern California?
@@salvadorcruz1446 We have had trainings in Phoenix AZ (6 hours from Southern Cal...but have no facilities or trainings in CA.
I didn't like the inside corner when you rolled the grout joint. Would have looked more natural without.
great comment
Why don't you put subtitule un Spanish??....those are the vídeo much more interesting..!!
Great comment...we will look into that
Your corner is sagging a bit😬