How to Do Vertical Stamped & Carved Concrete Overlay STEP 4 of 5

Поділитися
Вставка
  • Опубліковано 6 жов 2024

КОМЕНТАРІ • 111

  • @JavierGarcia-qy5bi
    @JavierGarcia-qy5bi 6 років тому +5

    Beautiful, you really explained every detail of the process, great job. I was looking for this type of vídeos

  • @fordguyfordguy
    @fordguyfordguy 7 років тому +6

    wow, very cool technique and tips! Thanks for putting the video out there!

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  7 років тому +1

      No problem...thanks for watching! Give our mixes a try...you will love them! ; )

    • @hitman101d6
      @hitman101d6 7 років тому

      Well cool video will you send me on a catalogue please.Do you ship over to Ireland

    • @hitman101d6
      @hitman101d6 7 років тому

      Sorry here is my email brianpaps487@gmail.Com for catalogue thanks very much,

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  7 років тому

      Did you get the emails I sent with the information?

    • @javiervilla8810
      @javiervilla8810 6 років тому

      Hi there !where can I get the molds?

  • @murathakverdi
    @murathakverdi 7 років тому +1

    Thank you for sharing your great knowledge videos. It was very helpful.

  • @jerryjohnson5535
    @jerryjohnson5535 6 років тому

    Seems like a cool guy to work for

  • @Trail_Rides
    @Trail_Rides 5 років тому

    Very cool. A mortar table would be nice

  • @nicanorsanchez3183
    @nicanorsanchez3183 3 роки тому

    great great job I 'll try to fo in my wall and paint.🥉🏆🏆

  • @johnmack4351
    @johnmack4351 4 роки тому +1

    Very good instruction but I did not see the part where you would do an outside corner. You reviewed the inside corner but not outside?

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  4 роки тому

      Sorry for the late reply...the inside and outside corner video is actually being edited right now and will be up after the first of the year.

  • @jsingh1771
    @jsingh1771 4 роки тому +1

    Very good

  • @sheabernard1962
    @sheabernard1962 Рік тому

    While I am very intrigued by this process, it does seem time consuming and messy. Primer->ScratchCoat->Primer again->Cement->forms->accent base ( Mix+apply)->primary color (Mix+apply)->accent color ( Mix+apply)->sand/scuff->seal
    What worries me the most is everything you have to buy, not sure this is any cheaper or faster than real stone veneers; cheaper than full stone sure, but i can get stone veneers for 150 sq feet for $500, with everything I'd have to buy, is this cheaper?

  • @harishsinhsodha8158
    @harishsinhsodha8158 4 роки тому +1

    Nice

  • @junealodamira8291
    @junealodamira8291 3 роки тому

    I wish I had that too.

  • @0101-x5e
    @0101-x5e 4 роки тому +1

    Hola buen dia, cuanto cuestan estos moldes. En Dallas Texas tienen distribuidor? O como le puedo hacer para que melos manden?

  • @youthinkso1968
    @youthinkso1968 3 роки тому

    You said if you use the pro bond dry primer and apply with a roller that you don't need to apply the wall mix? You can apply stamp mix directly to that rolled on primer.?

  • @akungwelly
    @akungwelly 5 років тому +1

    Can we make the textures of the stamp by using cement and sand mixture?

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  4 роки тому

      are you asking if you can stamp a sanded cement mixture...the answer is yes. Stamped concrete is most widely done using truck pour or ready mix concrete. We sell overlays that are designed beautify or fix, and go over existing concrete. big difference is in the working time of the concrete. Readymix dries very quickly so you only have enough time to do specific kinds of stamping. Polymeric concrete overlays like ours have a very long dry time which allows you to shape, stamp, carve and work the concrete to make it look how you want.

  • @CCROSS5882
    @CCROSS5882 4 роки тому

    love your videos, can you scratch coat the whole wall of a house then do the imprint coat or is there a time limit on the scratch coat?
    Thanks

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  4 роки тому

      You can scratch coat the whole wall and go back any time...we've had some who had the scratch coat up for a couple years. Beyond that...not sure, but the longer it is the more you will need to remember to clean it or pressure wash it before applying material to get all the dust and dirt off of it.

  • @KodyKimani
    @KodyKimani 7 років тому

    omg that is beautiful

  • @johnjhon6901
    @johnjhon6901 3 роки тому

    There's no any price on the web site. What is the price for this set used in this video pls?

  • @jeremyhills2242
    @jeremyhills2242 Рік тому

    What products are you using to create the colors after the product is laid and stamped/carved? Is there a video

  • @mnunyabiz1913
    @mnunyabiz1913 2 роки тому

    why not just spray on the primer?

  • @hosseincc
    @hosseincc 2 роки тому

    hi.What do you mix the cement with and in what proportion that it does not crack and does not dry quickly and it is time for us to do the stamp?

  • @VickiSinclair
    @VickiSinclair 4 роки тому

    Do the overlays come off easily? How do u take them down?

  • @keyvoz
    @keyvoz 7 років тому

    Good Good Good!!!
    Hello!
    how can I buy the molds and supplies to perform this same job ???

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  7 років тому

      If I have a distributor close to you you can buy the products there. If not, you can buy factory direct. www.stoneedgesurfaces.com, info@stoneedgesurfaces.com 844-786-6333 in the US

  • @JuanRodriguez-sc1jd
    @JuanRodriguez-sc1jd 7 років тому

    Hola me podrias decir que gruesor de mezcla le pones y el liquido para que no se pege ,soy de Mexico y esa marca no hay aqui

  • @Mrdubomb
    @Mrdubomb 4 роки тому

    whats the price per square foot for materials and whats the difference between the 100 and 110 primer?

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  4 роки тому

      average is $1.75 to $2.50 per sqft depending on depth of mix...and Primer 100 is liquid and Primer 110 is powdered and you add your own water.

  • @youthinkso1968
    @youthinkso1968 3 роки тому

    What is the coverage per bag?

  • @fordguyfordguy
    @fordguyfordguy 7 років тому

    Do you need to follow the same procedure (scratch coat and bond layer) if you are vertically stamping a block wall?

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  7 років тому +1

      Andrew...thanks for writing! Yes...you need the primer for the chemical reaction to adhere the scratch coat to the substrate (vertical or horizontal) and the scratch coat adds the ridges or nodules that help the wall mix stick or hold and not slough or slide while you are adding more and more mix to the wall and increasing the weight then being stamped, carved and drying. You would also do a bond coat between the scratch coat and the wall mix for the same reason listed above. Again, the scratch coat helps vertically by giving the wall mix something to hold onto while it is being worked.

  • @fordguyfordguy
    @fordguyfordguy 7 років тому

    One more question - when I go to your web page and browse products, I see the mix but not the stamps....where can we find the stamps?

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  7 років тому

      Andrew...I missed this comment...sorry!
      Go to www.stoneedgesurfaces.com and click on "Resources" in the upper button bar...it is the second selection down on the drop down.

  • @akungwelly
    @akungwelly 5 років тому

    Can these textures be made in cement and sand mixtures?

    • @sheabernard1962
      @sheabernard1962 Рік тому

      I'm going to try it, stucco bud told me all you need to do is mix in an acrylic bonding agent with regular portland cement, mix to same consistency as mortar ( will hang on trowel sideways without sloughing or falling off ) to use these type vertical stamps.

  • @Bilalahmed-vq3gs
    @Bilalahmed-vq3gs 7 років тому

    dear sir what material u use in this bcoz i live in india and i want to do this in my house... please tell the material ratio u use in this so i can make my wall beautiful

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  7 років тому

      Bilal,
      This was created with Stone Edge Surfaces Pro Wall Mix and Liquid Colors. Go to www.stoneedgesurfaces.com to see the products.
      You can buy directly from the US.
      Thanks

    • @Bilalahmed-vq3gs
      @Bilalahmed-vq3gs 7 років тому

      Sir i want to dovelop this in india.... It wil be so costly if i wil buy from U. S bcoz lots of transportation cost and 100 % tax also... Thats why i want to make its here... Can you please tell me raw materials use in this?

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  7 років тому

      Bilal,
      I am sorry but that is proprietary to our manufacturing facility.
      However, we are negotiating with a Distributor in India at the moment. I will let you know if they come on board and buy by the container so You can get it from them.
      Thanks

  • @nihatcansaral8326
    @nihatcansaral8326 6 років тому

    What products are you using

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  6 років тому

      Sorry for the late reply!We are using Stone Edge Surfaces Pro Wall Mix, Primer 100, Liquid Colors and Pro Seal. you can find them all at www.stoneedgesurfaces.com

  • @Mo-ev3pk
    @Mo-ev3pk 6 років тому

    What the name
    of these type of stone

  • @sadashivjewellerskangra6380
    @sadashivjewellerskangra6380 6 років тому

    Hello sir can you recomend me the website from where i can buy these stamps. I am from india

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  6 років тому

      Send me your email to info@stoneedgesurfaces.com and I will send you the 2018 catalogue and pricing so you can order. The web site does not have all the 2018 stamps on it yet.

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  6 років тому

      send me your email address to info@stoneedgesurfaces.com and I will send you a catalogue.You can see some of the stamps at www.stoneedgesurfaces.com, but the site is not updated with 2018 new stamps, so send an email and we will email you a catalogue.

  • @brazilfriends
    @brazilfriends 6 років тому +1

    How much is the Drystack stamp?

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  6 років тому

      The Mountain Dry Stack stamp set of 5 stamps $487 USD Contact me at info@stoneedgesurfaces.com for a complete price list and catalogue.

  • @caseychima2418
    @caseychima2418 7 років тому

    good job, where can i get this stamp please

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  7 років тому

      Depending on where you are located...I may have a distributor close to you and you can go and pick one up. If you are not close to a distributor, you can order direct from our factory.
      Where are you located...What State are you in?

    • @caseychima2418
      @caseychima2418 7 років тому

      ooh Am in Holland # The Nederlands, i prefer online shop direction, if possible. thanks for ur response

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  7 років тому

      You can order direct from the factory.
      give me your email address and I will send you a catalogue, price list and order form.

    • @caseychima2418
      @caseychima2418 7 років тому

      ajuluparish@hotmail.com.

    • @jadewest2668
      @jadewest2668 7 років тому

      Stone Edge Surfaces

  • @mihirtopiwala262
    @mihirtopiwala262 7 років тому

    Hi can we do stamp in wet areas like wash room or fountain?

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  7 років тому +2

      Yes..our mixes are used to make showers, pool decks, waterfalls, fountains...even underwater features in aquariums.

    • @mihirtopiwala262
      @mihirtopiwala262 7 років тому

      So for shower area or wet area some extra chemical required?

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  7 років тому

      Not really extra chemicals...you would use our white mix as it has white portland cement in it which is better in water areas.

  • @MJ-tx8jz
    @MJ-tx8jz 6 років тому

    What is the cost for the three stamps that you used on this demonstration please?

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  6 років тому

      That set is called Mountain Dry Stack and actually has 5 stamps in the set...the three you see and 2 smaller ones for tight spaces. The set sells for $487.50

    • @tonysegarra7086
      @tonysegarra7086 4 роки тому +1

      Still the same price ?I did sent an email to you guys but unfortunately no one could reply back to me 😔

    • @marlboromatt5656
      @marlboromatt5656 3 роки тому +1

      @@tonysegarra7086 same with me. As a Mason I’m interested in this but getting pricing or getting someone to return an email or call is not happening. Went to their website and no prices or ways to buy either .

    • @tonysegarra7086
      @tonysegarra7086 3 роки тому +1

      @@marlboromatt5656 price is $487 but they never respond back after I email them many times. I found 3 pieces set for less and actually I selling them on marketplace, because I do not work construction I allready finish all my home projects.

    • @marlboromatt5656
      @marlboromatt5656 3 роки тому

      @@tonysegarra7086 would you mind sharing where you bought yours since these guys won’t ever return my inquiries?

  • @fube1987
    @fube1987 7 років тому

    does he have a cement material

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  7 років тому

      Yes...Stone Edge Surfaces is the manufacturer of cement mixes.
      He is using:
      Stone Edge Surfaces gray "Pro Wall Mix", Primer 100, Pro Stamp Mix gray for the Scratch Coat.
      Go to www.stoneedgesurfaces.com and click on more info, fill in the info so I have your email address and I will send you catalogue and brochure

  • @fritzgeraldcuasinoayo2400
    @fritzgeraldcuasinoayo2400 7 років тому

    How to order that stamp pls let me know

  • @ashmohammed7009
    @ashmohammed7009 5 років тому +1

    where do buy the products?

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  4 роки тому

      Ash...sorry this is so late! send us an email to info@stoneedgesurfaces.com and we will send you a catalogu and distributors close to you.

  • @dinodangelo5743
    @dinodangelo5743 7 років тому

    Hi there, do you have supplier's, stockist in the U.K. please

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  7 років тому

      We do not have a distributor in the UK. You can buy direct. or become a Distributor for us! ; )

    • @dinodangelo5743
      @dinodangelo5743 7 років тому

      I have been on a course through Flex-c-ment, paid £500 for the course and now there is no supplier in my area, and cannot get answers from Turkey, pissed is not an accurate description, but would like to get supplies for personal use now, any ideas of contacts, as buying from yourselves could prove costly to import, but thank you for your reply

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  7 років тому

      This is the only email I have for them: info@dekorbeton.com

    • @dinodangelo5743
      @dinodangelo5743 7 років тому

      Dekorbeton not good people to deal with, they were only interested in taking our money for the course, tried contacting them several times to be threatened with courts, therefore would like to deal with supplier in uk if at all possible, but thank you mate, if we were nearer you would get my orders

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  7 років тому

      Find me a distributor in the UK that might be interested and lets see if we can get something going! I used to do a lot of business (when i was in the pool industry) with Certiken there in the UK...maybe they would be interested.

  • @fahdvevo8951
    @fahdvevo8951 6 років тому

    where to buy these stamp moulds in Pakistan??

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  6 років тому

      I do not have a distributor in Pakistan...so you can buy factory direct from our US factory. Contact us for pricing and a catalogue: info@stoneedgesurfaces.com

  • @fube1987
    @fube1987 7 років тому

    You can write the ingredient materials

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  7 років тому +2

      Stone Edge Surfaces:
      Pro Wall Mix
      Primer 100
      Pro Stamp Mix for the scratch coat
      Liquid Colors
      Pro Seal as the reactive agent for the Liquid Colors
      www.stoneedgesurfaces.com

  • @elwinnordman2578
    @elwinnordman2578 6 років тому

    obviously not a plasterer

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  6 років тому +1

      Ha ha...no....we are concrete guys!we will be stamping and carving it so it doesn't have to be smooth and perfect like you trained plasterers can do...with us, texture is a good thing. ; )Thanks for the comment!

  • @52sadman
    @52sadman 5 років тому

    Painful to watch so slow

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  5 років тому

      We do need to explain as we go because it is a basic skills training video. Your skills may be more advanced and so it seems slower to you. I do not know if I would say "painfully" slow : ) ...but you may might like some of our more advanced trainings better.

  • @realcasama
    @realcasama 6 років тому

    old style why dont you just spry. people think you are master but to me you are not

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  6 років тому +2

      Thank you for your comment. When you say spry...do you mean spray? As explained in earlier responses, We teach many methods and this is just one of them. We do teach how to spray and use that technique when we are doing brick and other finishes. This method is hawk 7 trowel and throwing mix, and again...is just one of many methods that does not require special equipment. It sounds like you are experienced and use a different method, and that is fantastic. Please send me a link to your video so we can take a look and see if your style is something we can incorporate into our trainings or if you are talking about using a hopper or mortar sprayer method.

  • @keyvoz
    @keyvoz 7 років тому

    Good Good Good!!
    Hello!
    how can I buy the molds and supplies to perform this same job ???

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  7 років тому

      Send me your email address and where you are located (city, state or country) and I will get you our catalog and prices.

  • @pwercompany5656
    @pwercompany5656 6 років тому

    How to order that stamp please let me know

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  6 років тому

      Depending on where you are located...you can order from one of our Distributors. If we do not have a distributor close to you then you can order directly from the factory. What state or Country are you located in?

    • @pwercompany5656
      @pwercompany5656 6 років тому

      montreal ,Canada

    • @stoneedgesurfaces3959
      @stoneedgesurfaces3959  6 років тому

      No Distributors in Montreal, so you can order factory direct. if you provide me your email address I can send you a catalogue and pricing and how to order instructions. So you do not have to share your contact info on this open forum...send me an email at bruce@stoneedgesurfaces.com