DIY How to make a silicone mold concrete stone stamp

Поділитися
Вставка
  • Опубліковано 3 тра 2020
  • In this video I will show you how you can make a concrete stone stamp from silicone.
    It's very easy and you will nedd only silicone and a stone to do your DIY concrete silicone mold stone stamp.
    I used two silicone tubes, a stone, a silicone sealant gun, water and dishwashing detergent.
    I hope you enjoy this video

КОМЕНТАРІ • 51

  • @heckkoch9
    @heckkoch9 6 місяців тому +4

    mind-blowing....have 25+ years of experience in product development, prototyping, mold-making/casting RTV...I have never even thought of using RTV silicone from a caulk tube/gun.....dispensed into a bucket of soap water and hand apply!!! Thank you for sharing!

  • @minkyfran8307
    @minkyfran8307 2 роки тому +15

    Thanks for posting this , I’ve been looking at stone stamps online and the cost is ridiculous, I’m definitely going to try this now ❤️

  • @nimbinpaul
    @nimbinpaul 3 роки тому +6

    You totally demystified that for me..thank you. No mess, no crazy stuck gloves..cheers

  • @andrewgriffith5638
    @andrewgriffith5638 2 роки тому +6

    This worked like a charm! Knead the clear silicone underwater until it turns opaque. I was able to pull them off the stone in 1/2 hour

  • @gracielabonilla5160
    @gracielabonilla5160 3 роки тому +7

    Thanks , exactly what I was looking for now am ready to do the most amazing projects in my house

  • @tkirk78
    @tkirk78 3 роки тому +4

    This has been the most helpful video I have ever watched! 😊

  • @elsaruizlaboy4152
    @elsaruizlaboy4152 3 роки тому +2

    I love your video! I'm ready to do my own for my handmade waterfall. Thank you so much appreciated!

  • @johnpayne3992
    @johnpayne3992 2 роки тому +8

    I made two silicone molds using this technique and it worked GREAT! Perfect molds that were easy to make and cost so little!

    • @mmoore017
      @mmoore017 Рік тому

      Can you use mineral spirits as a release agent on the silicone?

    • @faratt1
      @faratt1 5 місяців тому

      Ciao,che tipo di silicone hai usato?

  • @rosesarered3904
    @rosesarered3904 3 роки тому +3

    Thank you so much for sharing this video. This is going to help me a lot.

  • @cchemmes-seeseeart3948
    @cchemmes-seeseeart3948 Місяць тому

    Interesting. Thanks for sharing your ideas. I wonder about the bare hands though. I've seen tubes of silicone adhesive give a warning right on the front of the package that silicone is known to induce allergic reaction with repeat exposure. I actually had this happen, where all of a sudden i started to develop a rash & extreme itching. The problem with allergic reaction is when it progressed to involve the airway & whole body.

  • @johnjhon6901
    @johnjhon6901 2 роки тому

    Nice and clean,thank you.

  • @maritzahervia8992
    @maritzahervia8992 3 роки тому

    You guys are amazing!!!

  • @nadimsuraj0445
    @nadimsuraj0445 4 роки тому +2

    Very nice. Waiting for stamping video

  • @donpoitras5188
    @donpoitras5188 2 роки тому

    Great job!You are a clever man👍👍

  • @rjbiz3639
    @rjbiz3639 Рік тому

    Awesome, thank you !!!

  • @user-lm9fe4uw3s
    @user-lm9fe4uw3s 7 місяців тому

    Excellent!

  • @brighterdaysplantnurseryan2629
    @brighterdaysplantnurseryan2629 2 роки тому

    Thank you so very much!!!

  • @mikeflynn4373
    @mikeflynn4373 3 роки тому +2

    Excellent video...well done. Show us how you colour the mortar please.

  • @gracezaragosa6482
    @gracezaragosa6482 4 роки тому

    Very nice, will tryt

  • @bayituek1679
    @bayituek1679 4 роки тому

    Massook pak eko

  • @thpet1
    @thpet1 2 роки тому

    Thank you

  • @Ravirishi
    @Ravirishi 3 роки тому +3

    Like the way U did this buty...but if u included a stamped effect on a concrete project it d ve been more nice..

  • @valentinlazo8560
    @valentinlazo8560 Рік тому

    Amazing

  • @verajerome5041
    @verajerome5041 3 роки тому +2

    What brand of caulk did you use? Is clear better?

  • @pradeepperera8154
    @pradeepperera8154 4 роки тому +3

    thanks its very helpful video .Can i used oil on the stone surface.then mold can remove easily .your opinion please .

    • @stevexxx6078
      @stevexxx6078 4 роки тому +3

      oil wont be as good too slippery. Besides, dish liquid is cheaper than oil. You can use baby powder.

  • @crazycressy7986
    @crazycressy7986 2 роки тому +1

    Can you just paint the slab with mould release agent and then just spread the silicone over the slab and let it go off

  • @lisamanning586
    @lisamanning586 2 роки тому

    Great job! Did you only use 2 tubes of silicone?

  • @juliansabularse
    @juliansabularse 4 роки тому +7

    How many tubes of caulk did you use in total?

  • @Maggie-Gardener-Maker
    @Maggie-Gardener-Maker 2 роки тому +1

    What happened to you, no more videos? I thought you were going to do a cement stamping project with this stamp.

  • @billys6369
    @billys6369 2 роки тому

    Pure silicone? Didn't quite get "universal" silicone. Thanks

  • @LearningCurves123
    @LearningCurves123 Рік тому

    how many times can you use this?

  • @aiman.r71
    @aiman.r71 3 роки тому +2

    Type of silicone?

  • @andrezsalazar9887
    @andrezsalazar9887 4 роки тому

    have you used it already? I'm getting ready to do mine but with clear silicone. I heard if you open up the tubes and boild the silicone to liquid it turns out very well on a stamp. I like ur video! let me see how it looks like when you use it.

    • @diyprojects4426
      @diyprojects4426  4 роки тому +2

      Hello Andrez,
      I didn't used yet because i'm busy doing another project. I will use next week and I will put a video to see the results. Please subscribe if you want to see updates and more videos and DIY projects. Thank you.

    • @cheakyboy86
      @cheakyboy86 4 роки тому

      I also will wait for the stamp video 😊

  • @rubenalmaguervaquero125
    @rubenalmaguervaquero125 9 місяців тому

    Mamalon 👍

  • @badarticle9132
    @badarticle9132 4 роки тому +4

    Nice one. Had a look on UA-cam a while back to see if anyone had made a vid doing a silicone stone mould- and no one had.
    I take it you’re like me and do not want to pay the crazy money for those resin cement stamps? If so what are your plans for this?
    I’m going to be doing an outside wall. Great vid. Keep it up!

    • @mikejustice1196
      @mikejustice1196 3 роки тому

      U didn’t see a video because I didn’t share mine.
      He’s a year late.
      Made one for my business last year.
      There were no videos so I got some 100 % silicon and went at it.

  • @faratt1
    @faratt1 5 місяців тому

    Ciao che tipo di silicone hai usato?

  • @felipenacionales4387
    @felipenacionales4387 3 роки тому

    X

  • @mikejustice1196
    @mikejustice1196 3 роки тому

    He didn’t invent this. He copied someone else’s work.

    • @margaretrose711
      @margaretrose711 3 роки тому +9

      Well won't you be copying him if you make one?

    • @KillingAddiction
      @KillingAddiction Рік тому +1

      Nowhere in the video is it suggested that he invented this technique. lol

  • @valentinlazo8560
    @valentinlazo8560 Рік тому

    Thank you