2010 hyundai elantra custom Lights
Вставка
- Опубліковано 20 жов 2013
- This is my 2010 hyundai elantra with the Following:
Self retrofitted BI-XENON MORIMOTO MINI H1 6.0 With DDM HID Kit Slim Ballast 35W kit
Custom retrofit projector fog lights. By Essential Lites With DDM Tuning 35W 6k kit as well DDM LED switchback turn signals.
Music by PoGo - Wizard of Meh
If you like to know anything feel free to ask :) I put a lot of work in to this car's look im not in it for the speed I just love the efficiency and the look of HID Projectors
Special Thanks to
DDM
Essential Lites
Theretrofitsource
hidplanet.com forums. The one stop place for everything retrofit help - Авто та транспорт
I guess my question is how did you install the projector into the factory housing in the headlights?
I apologize for any late replies I don't regularly check UA-cam but if I see your comment I will definitely try to get back to you as soon as possible let me know if you need any advice.. also I've upgraded the headlights from what you see now and we'll be posting a video soon of the upgrade
where can I buy those lights ??
Looking to do an LED conversion on a 2010 Elantra, really like the look of what you did. Did you use load resistors or replace the flasher relay?
Just the Flasher relay... Although be prepared the relay is hidden under the drivers side dashboard and is very hard to get to... you don't need to take apart anything... its just a bit of a reach and torque to get to
Randy Fox
Good to know there actually is one. I spent some time looking online and in the car itself and can't find the thing. Got a bit worried when I ran across a forum post claiming it is computer controlled. Where about under the drivers side dash should I be looking? Thanks for taking the time to reply to me, :)
solivagus777 I actually had the dealership put it in for me... Because it was kind of hard to get to... umm its if you think about it where the footrest is and straight up.. You can't really see it and it's hard to get to you kind of have to feel around until you feel what feels like the square relay and it's really up there like it took my whole arm to find it.... Again I would recommend you take it to the dealership and have them put it in for you....It takes the same relay as a 99 Lexus ES 300 so it will be easier to find the relay if you just look up that car
Randy Fox I found it, and after a bit of wrangling figured out how to get it out and the new one in. Can't thank you enough for telling me where to look, I would not have looked there if I didn't know it was there.
solivagus777 You're very welcome :) I wish you luck on your project
What number the bulds do u buy i just wanna buy a HID XENON CONVERTION KIT
😍😍😍😍😍
hey man hows it going, i have the same kit the ddm ballast and already have the bulbs as well, when you got your projector did you have to order the h1 bulb or just use the one from, ddm??
Sorry for the late reply.. holidays :)... anyway you have to buy h1 bulbs to fit in the MORIMOTO MINI H1 6.0 projectors as the stock bulbs are H11B. You can buy only the HID bulbs from DDM for a lot cheaper and carry over the ballast. The lifetime warranty from DDM will also carry over as long as you use their bulbs with their ballast.
ahhh gotcha i just orderd the mini h1 projectors over the black friday sale nice to finally see a video of the elantra with the projectors, i have the 2010 gls hows the cut off line?? i ordered the 6000k
Once you get it all set up... the cut off line is very nice :) as seen in the end of the video.
Was there adjustments that needed to be made to fit the setup?
The turn signals/ brake lights/ reverse lights / fog lights and high beams can pretty much be replaced by plug and Play LEDs.. turn signals will require either a load resistor or a special relay that takes care of hyper flash if you care. Your regular low beams cannot be switched out for HID's or LEDs due to the adapter it uses inside the housing.. projectors will require a retrofit I.E tearing apart the headlight and doing custom work to get the projector to fit.. so yes adjustments will need to be made for that.. hope this helps
2010 hyundai elantra--how do you remove the ashtray?
how much is the set up can you let me know please?
around $200 to $300 for all of it... give or take
How do I het these for my elantra
umm don't understand??
2010