Your conent was so hard to find it it a rare treat lucky i found it. They're these guys selling these setup on the website i wanted to see if i could make one myself. Is this easy for beginner? Can a rod zae40 rod work with this is there enough clearance?
I just found you, thank you so much I have a box laying here with a m660 cylinder and piston , but I have no idea what rod to use and the pin , I don't want to order the ones that are oiless off of eBay , I will be watching every thing you put out, and this is the first time I have ever subscribe and comment but you my friend are putting stuff out here no one else is doing , it's kind of like they are hiding it. THANK YOU!! PLEASE do a slow detailed video of filling in the holes of the block and every detail dumb it done for me anyway, I want to build one.
Damn I want this guy to build me a motor I have a Zeda firestorm yd100 what do you think about those motors what head could work with mine and get more power
@@gangsterbuilder you mean for the yd100 50mm I never opened up the motor cause it runs good and I never had any trouble but I would like to know what crank I have do you know anything about them Zeda firestorm yd100 it claims to have Yamaha components in it
I’m interested in what your talkin about but you need to set up so your phone or camera isn’t in ur hand and slow down a lil and explain what your talkin about more so I can understand what your pointing at, I didn’t know what points you were referring to. I feel like you definitely got good info but I’m not sure what you ment exactly with what u were pointin at. Thwnks
I'm I interested in one of your builds hopefully we can talk I live in northern California would it be possible for you to build me one of these and overnight it to me I'm new to all the internet but not engine I could give you my phone number and it would be a lot easier for me to pay you that way please get back to me ASAP
Whats the difference on the zeda80 and the lz40's ? I tried to find it on your videos but wasnt able to. Thanks
What oiless bushings and wrist pin are used? Do a video on this.
coming up for you
i have 38 crank stroke which cylinder do you recommend friend
Stihl ts400 with a 1/16 " spacer
Your conent was so hard to find it it a rare treat lucky i found it. They're these guys selling these setup on the website i wanted to see if i could make one myself. Is this easy for beginner? Can a rod zae40 rod work with this is there enough clearance?
one spacer and one copper
i sell spacers for the zl40 rod
@@gangsterbuilder is this project difficult for beginner that dont have any mechanical background.
@@gangsterbuilder hey what’s your website url?
The phantom 85 can it work with a stihl 440 cylinder and piston?
can i do anything like this with a bt100
Is it possible to use a three ring piston
one ring pistons are fast but heat up faster. the more rings the more drag
@@gangsterbuilder good to no
Arent the transfer ports supposed to be filled with some kind of JB Weld Alloy?
you can but lots of methods can get you the same results
Thanks for the video. No b.s. just the info u said it would be!
Can you put a windowed piston in it for a reed valve?
a reeded enginge needs a window
Hey man I was wondering what you filled the bolt holes with i was using aluminum brazing but was trying to use something easier like Yamaha bond
sdounds like your buddy is rubbing one out in the backround as you film this. shinning the ole helmet !
I just found you, thank you so much I have a box laying here with a m660 cylinder and piston , but I have no idea what rod to use and the pin , I don't want to order the ones that are oiless off of eBay , I will be watching every thing you put out, and this is the first time I have ever subscribe and comment but you my friend are putting stuff out here no one else is doing , it's kind of like they are hiding it. THANK YOU!! PLEASE do a slow detailed video of filling in the holes of the block and every detail dumb it done for me anyway, I want to build one.
i will be stacking a 660 for you
Damn I want this guy to build me a motor I have a Zeda firestorm yd100 what do you think about those motors what head could work with mine and get more power
I think the case is big enough to install husky cylinders
@@gangsterbuilder you mean for the yd100 50mm I never opened up the motor cause it runs good and I never had any trouble but I would like to know what crank I have do you know anything about them Zeda firestorm yd100 it claims to have Yamaha components in it
If you have a yd100 you can’t change the head, cylinder and head are 1 piece.
@@deathrow2591 so did the wrist pin clips fly out and destroy your motor yet??
I wanted to see your port matchup with a half case
I’m interested in what your talkin about but you need to set up so your phone or camera isn’t in ur hand and slow down a lil and explain what your talkin about more so I can understand what your pointing at, I didn’t know what points you were referring to. I feel like you definitely got good info but I’m not sure what you ment exactly with what u were pointin at. Thwnks
Ill be sure to try this
Plrase do . i build ms660 ms440 038 072 and any cylinder that wil fit. Tomorrow is a 56mm ms660 in the mail and i will do am unboxing
When you said "inches" at the beginning of the clip - you meant millimetres, didn't you?
Lol the way this thing runs.... (really bad) my guess is he meant inches lololol!
Queria falar inglês, para entender o vídeo. No Brasil ninguém faz isso aí.
Inches? Mm maybe?
I'm I interested in one of your builds hopefully we can talk I live in northern California would it be possible for you to build me one of these and overnight it to me I'm new to all the internet but not engine I could give you my phone number and it would be a lot easier for me to pay you that way please get back to me ASAP