AD-1 Amp Dyno Skar Audio RP-2000.1D by Jones Subwoofer Solutions JSS
Вставка
- Опубліковано 1 жов 2024
- AD-1 Amp Dyno Skar Audio RP-2000.1D by Jones Subwoofer Solutions JSS
Manufacturer ratings:
800w RMS @ 4 ohms
1400w RMS @ 2 ohms
2000w RMS @ 1 ohm
Dyno bank consists of
1x 135ah CMAX, no active charging.
Thank You For Watching!!!
Please LIKE, SUBSCRIBE, and hit the BELL, so you know when we post a new video!
See you next time!
------------------------------
Visit www.JonesSubwooferSolutions.com!
Ct2000 is the bargain buy in this class. I agree with @joe the rp I had was muddy.
Not really. JP23 and CAB22 outperform the CT in the same budget
I had this amp, and I hated it. It does do power, but it's very lacking in bass for certain frequencies and just sounded off, "muddy" as some have put it.
Wtf does muddy mean ???😒
@FATHER'S OF BASS The bass sounded bad, was more of a punchy bass instead of lows. Anything under 40s hertz was lackluster, muffled and tapered off quite a bit.
I got the rp2000 for my 3rd vehicle, to replace the Sundown 2000D, that I was giving to a friend as a gift. I used the RP for a whole 3 days and pulled it out and got a Taramps Bass 3k for the same price instead and was much happier that route.
@@Joe_1776 Yeah I learned that too on their rp800, I upgraded to their rp1500 and the bass sounds way better at all frequencies, I played around with a couple other bass amps I had, like nvx and deaf bonce and each one sounds slightly different on the same songs and all settings off. I guess it's not all about power.
If your hearing muddy,that's box not amp..the amp can only reproduce what it's given .the muddy is going to be the box or even the sub..lots of current subs are muddy sounding..it's not easy to get a woofer to play low,deep and clean..
@Ryan Moore it wasn't the box or subs, as I said before I had a different 2k on it and sounded great. It was the amp no question about it.
Just to clarify, Derek had this amp on his dyno and posted it 4 years ago. Not sure where you looked? BUT… Always great to see another machine test the same amp and see if there’s any discrepancies 👌🏻
Got a picture of where the gain and lpf are set at? Trying to get a clean sound at the right setting…
Everyone’s like thank for doing this but can you do this amp instead lol 😂😂😂😂
we sell these like hot cakes at the pawn shop which also specializes in car audio
When you gonna show us your build or any of the subs you build bro that’s what I wanna see careless about these amps… are you still building or no the shop closed down or what’s up brother JONES SUBWOOFER SOLUTIONS AUDIO????
We are busier than ever. I'll post some shop and sub videos soon!
@@Facekicker yessss please and Awsome brother hood for you yeah when I finally start making bread again ima come to you for my 5 18” top kits to my 100pound motors JSS FOR THE WIN
You must not have searched, at all. Skar 2000.1 dyno pulls up a 6yr old video and 4 yr old video from trusted youtubers.
I would please like to see the Skar Audio - RP-1200.1D amplifier dyno tested also soon as you can.
Why did you remove the amp meter? Everyone does that and its important info?
Gas prp2500.1 похожий?
Can it hold .5 ohm?
@@kayotic_records not recommended with RP Series
Would like to see power at 15.8 for people running lithium banks 👍🏻
Most folks running a 2k aren't charging quite that high
Cool,,thanks for doing this video,, could u please do a review on the avatar 3500.1
Please .
I will try!
Thank you
Just want to know can you play for hours without it getting hot? Love the channel.
Yessir, we install these into daily drivers often, no heat issues.
Thanks for your support!
@@Facekicker thank you
Test at 8 ohm
Keep up the good work shared to skar Facebook group
Much appreciated!
Did you have the subsonic filter off??
Yes
Ok thank you
Hell ya .that's jp23 territory..skar is proving me wrong again.. 😂
The JP23 does more at 2ohm then this does at 1 ohm and at a lower voltage
Not even close
@DustinG33 1750 at 2ohms is not more then this amp.... jp23 only does 300 watts more
@@DustinG33 the jp23 only does 804 at 4ohm and 1480 at 2ohm and 2480 at 1ohm at 14.25v and that's a fact.... and yes it can do .5 ohm but it's not gonna last for years if u do that so u are a liar
Yes it's almost same watts but this amp won't do .5 ohm and last very long
Hell yeah!!!!!!!!!!! Thank you.
You bet! 👊🏼
Can this amp do 8ohms?
Yeah it'll drive 8 ohms but it won't have much punch behind it, roughly half what it does at 4
@@Facekicker What do you think would sound better, wiring a dvc 4ohm sub at 4ohms using only one voice coil, or wiring it at 2 or 8 ohms using both voice coils??
@@bensenjoe7105 I would wire it to 2 ohms
Efficiency at 1 ohm?
It's shown twice in the video 👍
@@Facekicker ahh I missed it trying multitask thank you I will watch again
Impressive results
if you ever come across a SAZ-1500D 15th anniversary edition i'd love to see it on the dyno, i have #21 & 39 to be strapped on a Zv6 12