DIY lock and key replacement - Lost keys or lock not working
Вставка
- Опубліковано 29 вер 2024
- If you have lost your keys or the lock is not working, don't call a locksmith do this instead. Save your money and replace the cylinder lock yourself, it very cheap and easy to do it yourself. This method will work for all cylinder locks which is a large portion of locks around the world. For more DIY and how to videos LIKE COMMENT and SUBSCRIBE
#DIY #howto #billshowto Your donations help me to keep helping you .....
www.paypal.com...
Good job
Thank you . 😊
Thank you so much!
👍
Simply genius! Thanks so much for your help..... I managed to take off the cylinder.
Your information was accurate.
Cheers!
You’re welcome 👍
Can you send me the video how to change the cylinder of Lockwood security door lock. I will thank full to you.
cool
But how would that work? I mean that black thingy rotates with the turning of the key, it shouldn’t rotate without a key inside right?
Exactly. Mine will not move at all. Wasted a lot of time and also a fair bit of money
Is same for uk version
Can you drill the lock out?
You can but I prefer to do it like i showed in The video or snap the lock like this ua-cam.com/video/eHvuD2PhK_0/v-deo.html
I wouldn’t change the lock if the door was open and lost the key 🤦🏻♀️
Easy way to change a Euro cylinder,unless you live in Europe where that wont work.
Bro your a handymans Bible thanks for sharing your knowledge 💪👌
You’re very welcome
Saved my life. My keylock broke and i couldn't figure out how to get the whole thing out.
Thank you Bill! I used old steel guitar strings (the thinnest wound ones). This works well if the gap is FAR too narrow for any other tools. Thread it through to both sides and use "see saw" motions toward the cam. Whilst gripping it with two sets of pliers.
What do you do when:
a) never had the keys;
b) door locked by the snib;
c) snib will no longer move therefore door is locked.
d) worked fine the day before.
The door (and snib) worked fine for 10+ years. Door is only used during warmer weather.
Any solutions?
Hi Bill, quick question, I've got a triple lock security door - I've managed to take the cylinder lock out, but for the life of me, I can't figure out why when I replace the cylinder lock, it won't lock the door? The old locks were working fine too, but even when I put these back in now they won't lock the door either when I turn the key. Is there some sort of 'trick' I need to be aware of with it being a triple lock security door (e.g. hold something down before putting in the lock etc)?
Did you sort this? I have to change a triple one too
Thank you Bill! Very helpful. Personally i had to use dental floss to lift the cam due to small place (make sure to sure glove to avoid slashing your fingers).
Hey man how did you thread the floss through?
Those must really be low quality barrels. In my hand I have a EU made cylinder and that cam is solid. Must have a key to turn it out the way.
there are more than one type of euro cylinder. lazy cam and fixed cam.
Same here
Clean, clear instructions.
Thank you.
Help my door is locked closed how. Do I remove lock if door is closed locked and key won't go in
Snap the cylinder and manually unlock it. I have a video on this also👍
Thanks Bill! I spent hours trying unsuccessfully to fix a lock, but your video showed me how to fix it. REALLY appreciated!
Thanks. It's very helpful.
I was searching to make myself a lock but happy i saw this! Save me $ n time
Thank you Bill ‘ So easy if you know how 🤣👍
If you don't have the key, drill through the cylinder (from 3mm to 6mm) then rotate with a flathead screwdriver. I've done this too many times.
That doesnt work
Nice Bill..
Suggestion, sometimes those locks get hard to close, you jiggle handle up and down a few times to get it to close and lock (the finger locking thingy, not key), if you come across one be great to see how to resolve it! :)
Excellent help from your UA-cam video, I
Had to break the existing barrel, thanks for your help greatly appreciated ... suppose saved a few £s too 👍
Wow fantastic thanks mate, julie Ann from Longford lreland, 6th December 2020
👍
Most cylinder locks won't let u move that cam into the groove without a key
Legend
What if you can’t open the door?
Drill, then turn it with a flat screwdriver (did it yesterday)
Really you great video help and solve my problem. So I am thankful. Again thanks.
Worked like a charm. Bloody legend. Now to retract the tongue at the top...
thankyou Bill
Thanks as always Bill for more money saving tips, always appreciated. 👍👍👍👍
You sound a bit under the weather though Bill.
Just tired 👍👍👍
Wow much more elegant method than the mole grips of death. Thanks man
Hi Bill, what if the security door won't open and you can't get to the locking screw
Snap the lock and manually open the lock. I have a video on this also👍
Is it going to function if we use a thin knife or a nail file?
But my drills in the kitchen how would I get it lol?
Thank you! This was very helfpul.
You’re welcome 👍
10/10
perfect
It always amazes me when people use an electric screwdriver when they need to unscrew just a couple of screws
Why? He’s making a video and this saves him editing the inevitable slow part out.
Handyman. Master of nothing
can make the same key several locks
I don't have enough clearance. Any suggestions? I've drilled it already and all that's done is make it even worse. One side now spins freely (shit) and the other is stuck in position not moving just the tiniest bit... And now I'm desperately trying to find a solution but can't fit a shim. Great!
Iv got another video on how to snap the lock. 👍👍👍
@@billshowto Yep I just literally drilled the complete thing out now. Can't lock a door when there is no lock! Haha
Very helpful👍👍👍
So I took off handles and got lock out but I accidentally closed door and top deadbolt has locked my door 😭 is there a way to open it while closed
Use a flat head screwdriver 👍
@@billshowto thank you. The videos are super helpful!
So you call a locksmith when the door is open? Can't get to one important screw if it isn't! Bit useless this!
Can you elaborate on what you mean?
@@billshowto he means you can’t get to screw holding the euro cyclinder into the door frame, if the door is stuck in the lock position
Then you do this 👍
ua-cam.com/video/eHvuD2PhK_0/v-deo.html
the cam will not move without a key
Awesome work bill
Thank you so much you are genious
👍
Thanks for sharing Bill👍👍👍👍
👍
thanks Bill, I can't find a handyman to do small jobs and this really helped. Saved me a lot of money
Great full ideas and good work