Expression pedal parameters for the Eventide H9
Вставка
- Опубліковано 3 жов 2024
- In this third video in the series on the Eventide H9 and Mission SP-H9 expression pedal, we use the H9 control app to program the H9 for the expression pedal to control different parameters.
More on the Mission SP-H9:
missionenginee...
More on the Eventide H9:
www.eventideau...
Video 1 - Connecting up the SP-H9:
• Expression Pedal for E...
Video 2 - Installing H9 Control on your computer:
• Eventide H9 Control Ex...
How do you set the parameters for the pedal? Don't you have to touch the pad then set the level then touch the pad again? I'm on an ipad
you don't show how to activate that blue band around the control parameter so that you can make these settings. It seems to me that (at least on the iphone version), you have to click on the left button that lights up on the ribbon controller, then set the minimum; then click on the right button to set the maximum. There is no cursor visible in your presentation, so how you are getting that blue perimeter band to light up around the controller is invisible.
On the mac version used in the video, just put the cursor on the blue light in the blue band and drag. On the iPhone, press either of the two buttons surrounding the ribbon controller on the bottom of the preset control screen.
After pressing either of these buttons, drag the rotary knob for a parameter across the range you would like to be mapped to the expression pedal.
@@equestriangeorgia9284 Thank you!
I can't seem to get the hang of dragging the dot around the parameter for the expression. (I just got a EP25). Every time I try it maps the parameter in reverse. I have the heel in the down position. The pedal it calibrated and all the preloaded presets work correctly with the pedal. H9 only documents how to control this with an iPad. What's the trick??
How do you determine where is a heel a where is a toe position? I'm trying to get that on my iPad and it just doesn't work the way I want it. It is just doing whatever it wants.. I was trying to assign parameters for heel and then move ex pedal to toe position and assign parameters for toe, went back to heel position and it's all over the place..just really frustrating. Any tips on what I may be doing wrong? Thank you!
Do you know how to control Q Wah agorytm with SP - H9 - using a switch - to enable or disable the Wah with the SP - H9?
I think this should be possible. In the Pedal settings in H9 Control, Select Aux Switch Mappings and configure the switch for Bypass. This should enable the Aux switch on the SP-H9 to bypass the effects. Then following the instructions in the video, set the expression pedal to control the values in the Q-Wah that you want the expression pedal sweep to control.
Hello, i already had the Mission SP 1 before getting the H9. Can i fully control it the same way by using a Y cable ?
Hey man can you just set the expression pedal with the eventide H9. Hooking up the fu/(ing computer is NOT why I clicked on here. Tell Eventide you should be demoted.