showing you guys how to fix a gear linkage problem subscribe for more videos. Feel free to help support me and my UA-cam channel. link below paypal.me/lukebuin?locale.x=e...
My man, I am a mechanic, but spend most of my time working on other peoples stuff so for my own cars get neglected sometimes, this is real helpful because it saves me a lot of time, thank you Bruv all the way from Australia 🇦🇺🤙🏾🤙🏾
This is a very helpful video thank you as mine was struggling to go easily into first gear sometimes, but it is missing a few bits of information. You should also have a black plastic cover up above the peddles that also needs to be removed before you can undo all of the screws for the large grey plastic cover. I would strongly recommend marking the silver linkage rod (below the yellow plastic adjuster) at its top of travel and bottom of travel with a marker per before you try and adjust it so that you know where it was and where to put it back to if you need to - you can make a pigs ear of its adjustment quite easily and it seems to ratchet in about 1 or 2mm increments. As others have said the yellow clip breaks really easily so try not to bend it more than necessary and you don't need to clip it back in place each time to test the adjusted movement of gear lever - it has a left clip and a right clip. There is also a second rod with its own similar mechanism and adjuster that is much harder to get to - I'm guessing this does the other plane of adjustment but I didn't adjust it - it looks quite tricky to do and you might make a real mess of the adjustment - if you are going to adjust this one as well then it would probably be best to get the first one set as best as possible then do the second one and also mark its position before you start.
Thanks I have just fixed mine nice and smooth now.. but the plastic part that bends back is so cheap and fragile!!!nearly broke off
My man, I am a mechanic, but spend most of my time working on other peoples stuff so for my own cars get neglected sometimes, this is real helpful because it saves me a lot of time, thank you Bruv all the way from Australia 🇦🇺🤙🏾🤙🏾
The right side table
The righthand side
This is a very helpful video thank you as mine was struggling to go easily into first gear sometimes, but it is missing a few bits of information. You should also have a black plastic cover up above the peddles that also needs to be removed before you can undo all of the screws for the large grey plastic cover. I would strongly recommend marking the silver linkage rod (below the yellow plastic adjuster) at its top of travel and bottom of travel with a marker per before you try and adjust it so that you know where it was and where to put it back to if you need to - you can make a pigs ear of its adjustment quite easily and it seems to ratchet in about 1 or 2mm increments. As others have said the yellow clip breaks really easily so try not to bend it more than necessary and you don't need to clip it back in place each time to test the adjusted movement of gear lever - it has a left clip and a right clip. There is also a second rod with its own similar mechanism and adjuster that is much harder to get to - I'm guessing this does the other plane of adjustment but I didn't adjust it - it looks quite tricky to do and you might make a real mess of the adjustment - if you are going to adjust this one as well then it would probably be best to get the first one set as best as possible then do the second one and also mark its position before you start.
Hi Luke, my gear stick is quite clunky/sloppy not tight. do I need to a new gearbox or is there something I can check.
Anyone else managed to brake the plastic clip😞
mine will go into 5th gear but won't come out of 5th when the van is going slowly or stopped,but comes out when moving at speed ?
Hi my t5 won't go into 2nd and 4th all the time sometime it goes in fine then other times it's like it's nutrial any ideas
Hi my vw is a 6 speed and 3rd gear is sticking I tried this and it didn't work do you have any advise
Thank you so muchfor the video.
Quick question at
Brilliant mate - Worked a treat on my T5 (2011). Thought I had a gearbox issue but you solved it :-)
Nice one chap😎
Thanks great advice top man.
You're helpful.
Merci pour cette vidéo très utile. 👍
Great video thanks for shareing
Great video!
Thank you . Its help me alot. But what if only gear 2 hard to shift. I need drive really slow as 10km/h to shift gear 2. My van nissan urvan e25.