I found this video on OneEyeDrone. I have to say -- THANK YOU SO MUCH! I have had this problem and a grounded drone for 2 months -- took me that long to finally search it the right way and find your site. Instantly fixed and I can fly again!
Thanks a million!!!, my Phantom 4k was showing gimbal motor overload, and it was going crazy when i turned it on, saw your fix and decided to give it a try, it works so well i can't thank you enough, save me from shipping my drone to US for repair (my country doesn't have a service center).
Thanks bro.... My drone problem was solved with your video Mine was got crashed and gimbal was misaligned, motor got stuck So many technitians gave sugetions like change whole gimbal n bull shit I just went through your clip and followed accordingly PROBLEM SOLVED THANK YOU VERY MUCH Dude
This was extremely helpful! I was just about to send my drone to DJI to let them fix it. Your solution is very simple so I thought well let's give it a try. And it WORKED! This saves me a lot of time and money probably, so thanks a lot!!
minha gilmbal do phantom 3 standart estava apresentando o mesmo problema, graças a esse Video eu consegui resolver, parabens. my gimbal from phantom 3 standard was presenting the same problem, thanks to this Video I managed to solve, congratulations.
Thanks for sharing this, my drone was collecting dust already due issues with gimbal, and other fixes online did not help me to solve it. Tried out this one - and it works. It is not perfect yet, but I guess I need to do now full calibration and then maybe retry to adjust this axis.
Thanks, that fixed mine. Unit was crashed and broke the roll motor ring that holds it to the motor. Ripped cable in two. Replaced cable, then it would not align. Did this and also IMU calibrate and adjust roll a bit and it works.
I'm glad that you didn't glue as I've seen in another video. This way you'll need to realign the next time you have a minor hot. I'm thinking glueing things make it easier to break. Alignment is better than repair
Thank you sooooo much. You save me. Works like new. However, bad DJI construction. Round pin on the outer side is just made for making trouble. Best regards.
Can this be done with the pitch axis aswell? I have a problem where the pitch axis stop working a few minutes into flight. Do you have any suggestions?
It fixes my problem but I have to do this almost every time I fly. Is there any reason why it gets misaligned? When flying it's perfect, I can move the camera up and down without issues. The footage is stabilized also. Could it be that the gimbal roams freely in the drone backpack?
I crashed my PH3 STD today and now I am getting the same error message and the gimbal is going a little crazy. Will this help? What does adjusting that back bolt do for the gimbal? Thanks !
I've already unscrewed the screws and taken aPart the electronic circuit board. Doing the pliers part tomorrow! Hoping for the best, since its had the gimbal motor overload error since coming out of the box on Christmas (the day after it, actually) and this drone is pointless to me unless I can take video with it!! (AKA can't even move gimbal, takes video fine)
Thanks you, great vid... I did it and it's working... but I noted the camera doesn't focus to front totally, it is around 20° to left. how can I fix it? I used auto calibration from app.
Hi, i have this same issue..the component on mine is only very slightly off.. but it can not be moved no matter how much pressure i apply.. any ideas of why that is? Is it supposed to be able to move freely?
Hello dear Friend ! Would it be possible to post a video demonstrating the process? Because I'm almost changing the engines of the gimbal .... Please..
Parabéns pelo vídeo: Peço ajuda, meu drone é Phantom 3 SE , gimbal parou de se mexer, não faz mais movimento. Tentei mudar cabo friense mesmo assim fico na mesma. Peço ajuda.
Ok so the problem came back a 2nd time and I did the exact same thing to fix it, but this time the "fix" caused the gimbal to go crazy and is now worse than before. I tried fixing it about 4 times tonight and all had the same results -- gimbal out of control. Any ideas?
I guess so. The principle remains the same. I found a similar video here in youtube that addresses the same problem for phantom 2 vision + but I can not find the link for now.
It misaligned after a crash which also broke the epoxy bond that secures the shaft in place you can tweak it back with pliers but it's not bonded with epoxy anymore so it's going to move and you're going to keep repeating the same step you have to pull the motor apply epoxy and reassemble
PLEASE HELP p3 pro I bought and fixed a crashed p3 pro, I had to buy a used gimbal/camera my gimbal is not getting crazy, just 90 degree o0f horizon level, so I have checkd this method and it worked, wow I was so happy but then 3 days later i am in the same sopt again. i open the gimbal again to find out the shaft is turned again. how does it happend ?? or may be why ? can i do something to make it stay that way more then one flight ? please help
+Gilad Langer The shaft may have been detached from the housing. You need to glue it back. Check out this video to see what I mean: ua-cam.com/video/Y3Ii1i3-x3I/v-deo.html
I found this video on OneEyeDrone. I have to say -- THANK YOU SO MUCH! I have had this problem and a grounded drone for 2 months -- took me that long to finally search it the right way and find your site. Instantly fixed and I can fly again!
You have no idea how frustrating this roll issue has been!!! Thank you for a clear video of how to fix it!
Thanks a million!!!, my Phantom 4k was showing gimbal motor overload, and it was going crazy when i turned it on, saw your fix and decided to give it a try, it works so well i can't thank you enough, save me from shipping my drone to US for repair (my country doesn't have a service center).
superb bro u just save my day and time>>>>>>>>>>>>>>>>>>>>>>>>>>> thnxs again my drone working
Thanks bro....
My drone problem was solved with your video
Mine was got crashed and gimbal was misaligned, motor got stuck
So many technitians gave sugetions like change whole gimbal n bull shit
I just went through your clip and followed accordingly
PROBLEM SOLVED
THANK YOU VERY MUCH Dude
This was extremely helpful! I was just about to send my drone to DJI to let them fix it. Your solution is very simple so I thought well let's give it a try. And it WORKED! This saves me a lot of time and money probably, so thanks a lot!!
i pray God for this problem. You saved my day for a million days. Thanks for this tips, works like charm.
thank you a million times
minha gilmbal do phantom 3 standart estava apresentando o mesmo problema, graças a esse Video eu consegui resolver, parabens.
my gimbal from phantom 3 standard was presenting the same problem, thanks to this Video I managed to solve, congratulations.
Thank you man you just saved my day! ... my life !!
Thanks for sharing this, my drone was collecting dust already due issues with gimbal, and other fixes online did not help me to solve it. Tried out this one - and it works. It is not perfect yet, but I guess I need to do now full calibration and then maybe retry to adjust this axis.
You're a champion. Worked instantly. Thanks for sharing this!
Thanks, that fixed mine.
Unit was crashed and broke the roll motor ring that holds it to the motor. Ripped cable in two. Replaced cable, then it
would not align. Did this and also IMU calibrate and adjust roll a bit and it works.
Tried this and it worked! Thanks a lot! Greetings from Argentina !!
amigo si te funciono?
Sí, amigo, seguí los pasos que muestra este video y solucioné mi problema.
Very nice, clear and concise video. Well done.
Thank you sooooooo much! You saved my life bro! 😭 greetings from El Salvador
Man you saved me a lot of money and nerves. Thank you.
I had the same problem and now fixed. Thank you so much
THANK YOU SOOO MUCH!!!! This worked for me! I couldn't find it anywhere else!
Great Scot!!! You saved my drone. Thanks so much, mate.
I'm glad that you didn't glue as I've seen in another video. This way you'll need to realign the next time you have a minor hot. I'm thinking glueing things make it easier to break. Alignment is better than repair
Hot damn. You just saved my P3P from a crash.
Thank you sooooo much.
You save me.
Works like new.
However, bad DJI construction.
Round pin on the outer side is just made for making trouble.
Best regards.
Thanks dude this saved me, great video, right to the point
You are a real magician, Thanks !!!
TVM man, it worked like a charm! Cheers!
nice video, i was scared about the problem but I solve it whatching to your vid, very usefull, and it works with phantom 3 advanced to.
Thank you, i had this problem and this video realy works.
Tried this and it worked! Thanks a lot!
Very very helpful !!! Thanks...!!! now my problem is gone...
Fantastic dude thank you so much for posting this.
Thanks you very very much! i have exact problem with my p3p and it fixed with this metod! thanks a lot!
Thanx alot for ure vital tutorial,it help me much.
Great video and fix....Thanks.
Thanks for the help! Exactly what I needed.
This method really works. Again, Thanks !!!
Your a Life Saver!
Good video, any idea how to fix the focus on a phantom 3 standard?
Thank you so much for posting this!!
YYAAAYY !! It works perfectly now, thanks for the video :)
Thanks man, saved my day!
thanks you saved my life
this absolutely worked! awesome
Muchas gracias amigo me funciono de maravilla, no sabia que eso era lo que tenia mi dron
Could this same fix be used on the yaw axis control board to fix camera pointing slightly left of center?
I will try that out tomorrow!
Is that a PolarPro filter on your drone? If so/not can you post a link where to buy for good price?
It worked!! You save my bf´s life! Hahahahaha thank you very much!
Amigo,acho que você salvou meu gimbal,Obrigado.
Awesome, it fixed it. Thanks like a alot!
Thank you !!!!!!!!!! my problem is solved.
Can this be done with the pitch axis aswell? I have a problem where the pitch axis stop working a few minutes into flight. Do you have any suggestions?
This video saved my ass! Thanks!!!!
excelente video me ayudo a resolver mi problema bravo amigo tienes un suspcriptor mas
It fixes my problem but I have to do this almost every time I fly. Is there any reason why it gets misaligned? When flying it's perfect, I can move the camera up and down without issues. The footage is stabilized also. Could it be that the gimbal roams freely in the drone backpack?
I crashed my PH3 STD today and now I am getting the same error message and the gimbal is going a little crazy. Will this help? What does adjusting that back bolt do for the gimbal? Thanks !
I've already unscrewed the screws and taken aPart the electronic circuit board. Doing the pliers part tomorrow! Hoping for the best, since its had the gimbal motor overload error since coming out of the box on Christmas (the day after it, actually) and this drone is pointless to me unless I can take video with it!! (AKA can't even move gimbal, takes video fine)
hi, my camera is slightly tilted to the left, gimbal and IMU calibration did not fix it. what do you think is the possible problem? thanks.
adjust the component shown on video. :)
There should be a setting for it in the settings.
TheViewCrew - That only adjusts it for each flight, doesn't save.
I have Exactly the same issue. Any solution ??
crashed mine today and got the same message 😐 going to try this method 👍
HI!
I saw the video and I'm trying to do the same thing you did but it's very hard to turn it.
I have to drop something before.
Appreciate
Thanks you, great vid... I did it and it's working... but I noted the camera doesn't focus to front totally, it is around 20° to left. how can I fix it? I used auto calibration from app.
I'm having the same issue after switching out the ribbon cable. I will have to check this after work.
Jesteś wielki. Dzięki.
Hi, i have this same issue..the component on mine is only very slightly off.. but it can not be moved no matter how much pressure i apply.. any ideas of why that is? Is it supposed to be able to move freely?
would you know how to fix a failed firmware update on a phantom 3, all it does now it the gimbal spins and twists but drone wont start.
Hat down, thank you very much
Hello dear Friend !
Would it be possible to post a video demonstrating the process?
Because I'm almost changing the engines of the gimbal ....
Please..
Boa noite o meu está assim, você sabe me dizer qual seria o problema?
Me funcionó muy bien, fue fácil de solucionarlo. Muchas Gracias. :)
Parabéns pelo vídeo: Peço ajuda, meu drone é Phantom 3 SE , gimbal parou de se mexer, não faz mais movimento. Tentei mudar cabo friense mesmo assim fico na mesma. Peço ajuda.
Thanks, it works!
thanks for your help ¡¡¡ realy helpme a lot
Thank you so much mate! :D
is this the same problem ?
Nicely done.
Where I CAN FIND THE GIMBAL motor???? thanks
Can I buy camera gimbal only?
Ok so the problem came back a 2nd time and I did the exact same thing to fix it, but this time the "fix" caused the gimbal to go crazy and is now worse than before. I tried fixing it about 4 times tonight and all had the same results -- gimbal out of control. Any ideas?
Thanks alot, man!!!
Thank you bro
would this work for a Phantom 2?
I guess so. The principle remains the same. I found a similar video here in youtube that addresses the same problem for phantom 2 vision + but I can not find the link for now.
WOW, Thank you, that worked!!!! :-)
nice video, thanks
Can I change my camera Phantom 3 Standard to the best HD cameras such as the camera or camera 4K. ... ?
no you can't.
yes you can
my camera is freaking out and wont stop shaking ? whats up?
i can't turn that shaft! any suggestion?
It misaligned after a crash which also broke the epoxy bond that secures the shaft in place you can tweak it back with pliers but it's not bonded with epoxy anymore so it's going to move and you're going to keep repeating the same step you have to pull the motor apply epoxy and reassemble
Hey does this work for you? I just crashed my drone and I am looking to fix it. The Motors work fine, but I think the gimbal is screwed up.
How did you fix it?
It works.
brilliant thank you.
I have the exact same problem except the DJI go app also gives me a message saying that there is a battery error
0:30 i have the same Problem and i couldn t see the picture on my phne
Thank you!
PLEASE HELP p3 pro
I bought and fixed a crashed p3 pro, I had to buy a used gimbal/camera
my gimbal is not getting crazy, just 90 degree o0f horizon level,
so I have checkd this method and it worked, wow I was so happy but then 3 days later i am in the same sopt again.
i open the gimbal again to find out the shaft is turned again.
how does it happend ?? or may be why ?
can i do something to make it stay that way more then one flight ?
please help
+Gilad Langer The shaft may have been detached from the housing. You need to glue it back. Check out this video to see what I mean: ua-cam.com/video/Y3Ii1i3-x3I/v-deo.html
+OneEye Drone (OneEyeDrone) thanks , but I don't see him glue anything
Thanks
ty
I can't turn the shaft. How is this?
thanks mate :D
The problem is the gimbal tremble once and a while. What should I do?
Hello Friend !
I did exactly that, but it did not work, what do I do?
Try it and get it exactly perfect, and then try the gimbal calibration in your app and see if that works. If not IDK.😢
How to fix this gimball misalignment?
Solved my problem. still i do not have image on cell phone