Hi dude :D Great job :) Can I ask you how did you uplifted the front mudguard?? I got a KLE500 and want to do the same thing but I'm not very practical, so I'd like to have some advise and suggestions :) Thx
He just problaby drilled few holes and tapped them, in bottom tripple clamp. And then attached mudguard with bolts or if it is not possible directly attach you need a make clamping plate witch bolts on to tripple clamp ant then mudguard bolts on to that plate
Wiesz jak jest, wszystkie te motocykle takie podobne to chociaz ten niech sie wyróżnia:D najpiekniejszy nie jest ale w offroadzie tez nie o to chodzi - ma robić w terenie hehe wiec im mniej plastików tym lepiej a lampa szła prawie miesiąc wiec musze ją odpowiednio chronić:) dzięki za dobre słowo , pozdrawiam!!:)
Michał Denisiuk killer look! Absolutely love it. Can you please provide info for skid plate+ coolant+headlight? Also are you not bothered by your knees getting past the gas tank?
Hi! this is the engine cooling liquid, normaly this is located on the left rear but i just relocate that , this one is smaller but air flow is veery high without all the original plastics:) no problem with overheat, ligt on the dash never blink's, even on the slow technical section, sand etc
Hello! My name is Daniel from Hungary. I have KLE 500, and i bought an exhaust like yours. But I didn't get a middle connecting pipe. Where can I buy a middle pipe like yours? I couldn't find it anywhere, only with the exhaust. Can you help me, where can i buy it?
but its mutch heavier than this and sound is not good enough :D I want to be "visible" in the city traffic, drivers must hear me before watch me :D thanks to this approach Im much safer on the road
How did you connect the fuel gauge display? Did you have to buy a separate float?
nice bike,great job !!!!
Sehr gut umgebaut, das gefällt mir sehr gut 😎
Hast du den Luftfilter auch umgebaut?
Grüße aus Düsseldorf!
Bravo👏👏👏 Molto bella
The light is horrible, but the bike is cool, nice exhaust, but please change light lol
light has been changed to Baja style , check others videos :) thanks BTW for comment :)
Wydech z Aliexpresu?!
👏👏👏👏👏👏
Hi, what type of tacho is it? Was it exact fit or some modifications needed to be done?
Cześć! Jakie podnozki udało Ci się tak dopasować? 🙂
Nice Frankenstein 😂😂😂
Hi dude :D Great job :) Can I ask you how did you uplifted the front mudguard?? I got a KLE500 and want to do the same thing but I'm not very practical, so I'd like to have some advise and suggestions :) Thx
He just problaby drilled few holes and tapped them, in bottom tripple clamp. And then attached mudguard with bolts or if it is not possible directly attach you need a make clamping plate witch bolts on to tripple clamp ant then mudguard bolts on to that plate
excuse me for late, send me priv email and I will send you few pictures:)
Michał Denisiuk here u are ang-95@hotmail.it
Hey I'm also struggling with mounting my front fender can u please help me out , also that bash plate looks awesome
Thx
Hi, whose motorcycle is the front fender? Thank you.
Taki trochę Mad Max stajl hehe :) Może się podobać. Jak dla mnie bomba :)
Wiesz jak jest, wszystkie te motocykle takie podobne to chociaz ten niech sie wyróżnia:D najpiekniejszy nie jest ale w offroadzie tez nie o to chodzi - ma robić w terenie hehe wiec im mniej plastików tym lepiej a lampa szła prawie miesiąc wiec musze ją odpowiednio chronić:) dzięki za dobre słowo , pozdrawiam!!:)
Michał Denisiuk killer look! Absolutely love it.
Can you please provide info for skid plate+ coolant+headlight?
Also are you not bothered by your knees getting past the gas tank?
Did you change the head angle? very nice bike
which motorcycle the front fender is from?
KTM EXC
Gee, I remember that noise from mine…
great work, the speedometer is great. What is the liquid on the right over the cooler?
Hi! this is the engine cooling liquid, normaly this is located on the left rear but i just relocate that , this one is smaller but air flow is veery high without all the original plastics:) no problem with overheat, ligt on the dash never blink's, even on the slow technical section, sand etc
@@michal_denisiuk_adv do you have a suspension lift on the bike? looks higher
@@carlosandleon no, nothing change with suspension
Where did you buy the silencer exaust?
allegro.pl chinese copy of Akrapovic
Ik heb net een 2008 gekocht.. wellicht nog wat aan doen. leuke ideeen.
Windshiels for hands ,what is that model? Look nice
thanks, stock acerbis copy handguards , no name, just check on ebay or aliex
这条排气在中国买的吧？
Hello! My name is Daniel from Hungary. I have KLE 500, and i bought an exhaust like yours. But I didn't get a middle connecting pipe. Where can I buy a middle pipe like yours? I couldn't find it anywhere, only with the exhaust. Can you help me, where can i buy it?
Hello Daniel, send message to dominator.pl they have middle connecting pipes for this exhaust
Panie, jaka opona na przodzie?
Da vorne um die Lampe sind die Teile aus einem Lagerregal
This is fully stock, right?
@Cross Hatch it looks fully stock tho, are u sure?
@@mikhailanatoliy9990 almost stock :D
Co to za model i rozmiar tylnej opony? Pozdrawiam. Fajne przeróbki.
dzięki, to jest Mitas E-09 130/80/17
świetny jest ten wydech . Także rozmyślam co zrobić z moim kle 93 r ... ps. można namiary na ten wygar ?
dzięki, na allegro i olx jest cała masa tych tłumików, chińska kopia Akrapovicia :)
Nie ma juz z tym adapterem tylko uniwersalne
What's the Speedo and how did u get fuel gauge in tempted to go down same route as you
fuel level is disconected, speedo from china - aliexpres
Great vid dude
thanks :)
what tires do you have on your motorcycle ???
front and rear mitas e09 ???
front fork is stock o another bike? thanks
completely stock my friend, 10W oil and 0.5Bar on each cartridge + neopren socks, best regards
@@michal_denisiuk_adv thanks ✌🏻✌🏻
Hey Dude. Cool but wtf is with the lamp?
hahaha , it was a prototype version :D
bravo
BŁOTNIK Z PRZODU FAJNY JAKIEJ FIRMY?
Cool!!!
Original exhaust does a better job at keeping the noise down
but its mutch heavier than this and sound is not good enough :D I want to be "visible" in the city traffic, drivers must hear me before watch me :D thanks to this approach Im much safer on the road
Schöne KLE... die mag ich.
thanks :)
Ready for africa race!Can you tell me where you buy the protect engine plate?
hello, find facebook group Kawasaki KLE500 Polska, there is a guy who create and sell this kind of bash plates
@@michal_denisiuk_adv thanks,can you know if this guy send in Greece?
I have no idea, If you will have any problem with sending let me know and I will try to help you
@@michal_denisiuk_adv thanks very much!
Co to dokładnie za wydech jeśli można wiedzieć ;)
chinska kopia akrapovicia
Ale ten reflektor to można było ciut estetyczniej zamocować. Te kątowniki wyglądają średnio.
zobacz nowszy film, tam juz sa okragle rurki:)
Это надо ж было так мотоцикл изуродовать.
Jesteś z Żywca?
z Wawy
КолхозКастом
new vid ua-cam.com/video/jtxP3wDF0h8/v-deo.html