DIY Wooden Bluetooth Speaker Tutorial
Вставка
- Опубліковано 22 сер 2024
- Bluetooth speakers are really popular nowadays, unfortunately, none of them is designed how I would like to. The obvious choice was to make my own DIY Bluetooth speaker and show you the process. I highly encourage you to make your own speaker and design it the way you want, it's a simple and super satisfying project that will help you develop your making skills.
Bluetooth board: bit.ly/35R1OT1
Big Speakers: bit.ly/35GJ6NU
Small speakers: bit.ly/2Mvj9th
Battery: bit.ly/35SO0aX
Battery holder: bit.ly/2J40eUg
Cable: bit.ly/2BrH7zc
Support my projects on Patreon → / nikodembartnik
Instagram: nikodembartnik
#bluetooth #speaker #diy
music:
LIQWYD: / liqwyd
Fall Again (Instrumental) by Jonas Schmidt & henrikz / jonasschmidtof. .
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/fall-ag...
Music promoted by Audio Library • Fall Again (Instrument...
Awesome design. Using different tools to achieve it is simply put gorgeous. I'm still amazed by the minimalist electronic parts that project requires, really. Entertaining too. Thank you Nikodem!
Thanks, I have finally tools that let me build awesome projects like this so that's why from time to time I enjoy making design focused project :)
I really like how the speaker looks really refined.
Love the design. The finished product with the felt really goes together nicely!
Thanks! I am still staring at this thing, it looks soooo good :)
The Music @ 9:45 made me think of an Abom video i Was waiting for Adam to walk in lol
That's really good, mate. I thought it was even better looking without that filter!
Impressive knowledge of wiring and solidworks. I'm sure the rustic look is what you were going for but with all of those precision tools, it would be good to see something clean and well made. Well done though.
Nice DIY Bluetooth speaker build, really awesome 😀👍
Ich mag das Design......ist nicht so futuristisch wie die anderen, sondern erinnert eher an ne Werkstatt. Top Leistung. Grüße aus Berlin.
Danke!
Great job. I think if you revest into the box with any acoustic material and make a role between the speakes, the sound will be better.
My dad told me exactly the same thing when I was building this speaker, but there was no place inside for any additional material and also I almost finished it when he told me. I will consider it in the future ;)
very good!
As always great job ;) 👍
Thanks!
Good job! But you should use a higher battery capacity and a power bank module to be able to charge your phone with your speaker. Also, i couldn’t see if you assembled the batteries in parallel or in series but i just tell you that to assemble batteries in series without a BMS is really dangerous. And if you don’t like bluetooth speaker, why did you not just make a wired speaker?
It's nice for your first shot but better to back to design desk and make a better one. Don't forget that you are a maker.
What do you mean?
nice vid, can you make one with "call answering" , it would be really neat
Informative video, but lousy quality wood was there a pallet laying around that you used i couldn't believe how much equipment you had.
Looks really good!
how many volts is the capacitor 10nf
Wow man awesome job hope to build one in a bit
Awesome build!!!!
Thank you :)
Nikodem maybe you could use some leather belt to clip it on top of speaker to make cool looking handle. Greetings from Rzeszow.
sound amplifier lacks
You could use a lithium polymer battery
Nice design! How about the overcharge and overdischarge protection of the li-ion cell now that you left out the charging board?
Charging is implemented in the Bluetooth board, it lets you know that battery is low so I assume that there is over charge and over discharge protection
@@nikodembartnik I would look at that in more detail if I were you, just to be sure. Would be a shame if it breaks or worse sets itself on fire right?
The bluetooth board explicitly mentiones you should use an protection board I now see. Just trying to help you out :)
m.banggood.com/DC-3_7V-To-5V-3W-Digital-Audio-Amplifier-Board-Dual-Plate-DIY-Bluetooth-Speaker-p-1321336.html?p=PW041611183930201706&custlinkid=643677#popupStatedetail
I don't think that particular board has protection like a TP4056 module (all it has on for protection is the SS14 diode to prevent reverse polarity)...might need a battery with battery protection board built on it. Good enough to charge a few hours then use...but not leaving plugged in all the time
The design is great, but the quality of the wood used is imo not suitable for that cool design. Maybe walnut with linseed oil would be better?
It definitely would be better, but pallet wood is super cheap :) and it's also eco friendly
Hello! Please can you also add link for that battery charger? Because it is not possible to charge battery trough Bluetooth board so you need separated charging circuit. Also can I use that Bluetooth board for only one speaker? Thank you!
You don't need a separate charging circuit, you can simply charge through Bluetooth board, remember to turn on the speaker while charging otherwise the battery is not connected to the Bluetooth board so you can't charge it
@@nikodembartnik The board will charge the battery, but the board spec says you MUST use a BMS for the battery to prevent overcharging - that circuitry is not built into the bluetooth board. If you leave the charger connected that battery is at risk of exploding/catching fire
Nice😄
Czemu nie po polsku
good job
Thank you!
Very cool. I didn't know that bluetooth boards for this would be that inexpensive.
I don't have any criticism except that your wood finishing skills need a little work. ;-)
Thanks.
Thanks! Can you point out what I did wrong? I just want to know what to improve :)
@@nikodembartnik ... I hope that you realize that I'm basically teasing you as I would a friend. I suspect that you simply chose a piece of wood that you happen to have lying around as it has nail holes and a lot of imperfections. That said, I think that, if you put your mind to it and purchased true, cabinet-making quality wood, took your time, and did not use stain over glue and wood-filler, you could create a truly inspiring piece of furniture. You're an intelligent and inspiring young man and that's why I always give you the thumbs up. :-)
Hi, do you use fusion 360 for your projects? If yes, which licence do you use? I also think about fusion 360.
you can download free trial of fusion360, and after month apply for free subscription for hobbyists - even if you makes money on using fusion360 - www.autodesk.com/campaigns/fusion-360-for-hobbyists
Hello Nikodem!
You have excellent picture quality.
Which camera do you use for shooting and in what program do you process video?
Thanks for the answer!
Thanks! I use Lumix G7, Black Magic Pocket Cinema 4K and GoPro Hero 7. I edit with DaVinci Resolve 16
@@nikodembartnik Whoah! the BMPC4K is on my wish list since it's appeared. I understand why your pictures are crispy under relative low light. A pretty good script completes the whole of course ;)
Ty być Polak zdradził cię napisy np suwmiarka hehe ale i tak mi się podoba a szczególnie ta buda do głośnika 🤜🤜🤜
Very good dear
Thanks!
Wow wow
6:00 finally some good asmr
Sos muy crack solterosky
Cnc link plise?
Check out my other videos :)
Wkurwiaja mnie takie filmy jak drukarko- frezarka odpierdolila za gościa robotę a on to podkładał jak szafkę z ikeii, wszystkie meble w moim domu skrecilem to tez jest diy czy kupione w sklepie
Esp32