Unlike other "youtube tech celebrities" who just read off from teleprompter with doodling eyes, I particularly enjoy how this gentleman is truly trying to teach you knowledge with his own knowledge. Great work. I learned so much from this video.
There has been a great deal of confusion regarding AVX vs non-AVX, LTT vs HardwareUnboxed bench marks, standard/expected temps vs overheating temps. This video at 12:35 Understanding key aspects of overclocking frequencies, AVX, voltages, cache ratios and more...clears all that confusion up. Up until this point no other channel that I viewed explained this so clearly, although HardwareUnboxed came close. EXCELLENT job explaining these parameters and giving an overclocking tutorial, which I plan to use on my Asus Z370 as well. Thank you. P.S. I subscribed due to the quality of this video, so Newegg is indebted to JJ...:-).
Juan José Guerrero, muy buen tutorial. Deberías hacer uno en español si es que lo hablas, tienes una manera única y simple de explicar las cosas. Gracias por tu atención.
Tuf yea on the cooler prediction I told the AI to stop learning at a score of 160. My cooler is a beast so it kept getting a better score causing the AI to push the OC. this is on a asus maximus hero Xi WiFi
What's the difference between a 5ghz overclock on the first few cores and turbo boost? Isn't that the point of intel's turbo boost? Or is a 5ghz overclock become the baseline and turbo boost then jumps up above that?
cause when he chose the xmp overclocking profile the board asked him if he wants to operate at intel stock specs or not. it was not a confim of the xmp profile.. it was more than that and lifted all the things that kept like the power limits and boost timings and all that. i think its also called multicore enhancement on asus. i recommend not using that stuff and applying settings manually
good video, i have a question i have this procesoor on asus prime z390-a but when enable turbo boost on bios when i starts windows always appears blue screen and reboot the system automatically (only when enable turbo boost) if i disable it windows starts normally, can you tell me how to configurate my procesor to avoid windows restart when i enable turboboost?
I have an issue that I can't seem to solve. I'm running a 9600K on a Prime z390-A board, and have manually OC'd to 5GHz @ 1.35V (same exact steps as in this vid). This is perfectly stable and HWMonitor shows me running @ 5GHz at boot. The problem - any stress test I run (AIDA64 and Prime95) down clocks the CPU way low (4.4GHz). I know it is not a throttling issue for 3 reasons; all my temps are extremely low, including my VRMs, wattage consumption isn't exceeding any limit, and when I tried enabling the automated AI utility, it OCs to 5.1GHz and when I run a stress test, it does not down clock, so there IS a setting SOMEWHERE that AI utility adjusts, which prevents the down clock. I highly dislike the AI OC utility, so I'm aiming at doing it all manually. Things I've tried: Disabled AVX offset in case the stress tests utilize AVX Disabled ASUS MultiCore Enhancement Set LLC to max (dangerous I know) Set Short/Long Duration Power Limit to max (4095) Setting manual voltage Setting adaptive voltage Disabling XMP Disabling Intel SmartStep You may say just use the AI utility then, and well, it applies an extremely high voltage (1.45V) and uh, it randomly changes my ratio to 5.4GHz @ 1.55V in the MIDDLE of running games (despite me manually setting it to 5GHz @ 1.3V), which of course crashes my PC and forced me into OS recovery.
My i9600k was stable on 5.1 ghz (all cores) without touching the volts, got lucky I guess. Running Prime95 the asus rog strix went up to 1.2825v on max (6hours) 5.2ghz was fine on 1.35 , but sticking to 5.1 for longevity. ON AIR COOLING! The watercooling would probably just make better thermals, but I believe that 5.2 is the most u get out of this one, 5.3 @ 1.46v would eventually crash.
Hello I overclocked my 9900k with a h100 cooler on a asus tuf z390 plus gaming. I used all your settings and ended up with a 1.6vcore. Can anyone tell me why this can be happening.
Hey Nice video, but it didnt realy answered my question. I have 9700k dark rock pro 4 and z390 aorus elite. Everything is stock and im getting over 80c degrees in games. I was wondering what settings should I pick for vcore aka voltage and what numbers? I dont wanna OC it, I just want to bring the temps down. Can you please help me?!
You should take the time to adjust one value at a time so you know which made your system stable. Use AI Suite in windows to do this quickly. Use 5min prime95 blend after each adjustment. Check the BSOD code for what part of your cpu failed and adjust accordingly.
This software would benefit if you could actually revert to default settings after the AI Overclocking - unless there is a way to do this can someone help? I'm on auto overclock with my i9900k sitting at 5.1GHz but I'd like to revert back now. Thanks in advance
So is realbench just broken? I get an error using 2.56 'Unable to property parse system specs. Please report to RealBench forum' however this is reported there already with no response other then it isnt really supported any longer?
That only show me that the 9900k ran a 2110 cb score the first time then Throttled on the second run with a score in the 1700’s.. so with that in mind is that because of temps or is in because of the power limits not being max out ?? Plus imo the 240 rad you got on there is nice looking but it’s no good for that cpu
my ryzen 1700 hits 1749 cb soo ... it just tanks when you don't move up your power limit but with more power comes more heat and that 240mm is a joke for that cpu ... im going to run some test on a retail chip ... ill let you know
I notice that also, no wonder the camera panned away from the screen. You can actually see the CPU speed drop from 5ghz to 3600mhz in cpuz. Check time stamp 36:45
I have the Hero XI (WIFI) and the following RAM G.SKILL TridentZ Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 4400 (PC4 35200) Intel Z370 / X299 Desktop Memory Model F4-4400C19D-16GTZSW When I use any of the XMP settings I get a MEMOK error, and have to under clock the RAM to 4000mhz in DRAM Frequency. What am I doing wrong? is there anyway to get the XMP working and use the RAMs full potential?
Thanks a lot man, you are very cool. Like, literally, you explained everything calmly. I didn't think I'd watch the complete video, but your presentation and the content of this video, really didn't let it feel like it was a hour long. :)
Great Video. Normally the first thing I do when getting a new PC is look at the bios settings.. When I got my new PC loaded with a Prime Z390-A board and looked at the bios settings I was a bit overwhelmed with the choices. This video should be listed in the users guide.
You’re a walking legend. Got my 9700k OC’d to 5.0Ghz @ 1.24v stable... now the question I have is adaptive mode. I can’t get adaptive mode set to hit a max of 1.24v... when I set it in bios I boot up at 1.31v and it’s also my voltage while gaming. How can I set a specific voltage as my max on adaptive? In my case (1.24v)
dude theres no way, its because it looks like its auto increasing it to 1.31 because it cant go off 1.24. that would be potentially the best 9700k in the world. 1.31 is what it needs on yours to achieve 5ghz. set it to 1.31 and leave thats really good for a 9700k. I am at 1.34
I would like to vote for a full walk through of all mobo features. I have been system building for 30 years and have never really found a good explanation of all the advanced features from either the manual or any online resource. Thanks!
My i7 10700K sits at 4900mhz at 1.275V on manual, I switch to Adaptive, set the turbo to 1.300V, now the vcore shoots up to 1.400V.... WTF???? Surely I'm missing something.... AI Suite ramps up the voltage to 1.470V, that cannot be good....
Hi there, I have an Asus Rog Strix z390e motherboard and I do not have the "Adaptive" voltage mode option in my BIOS. Do you think I will need to move the jumper for CPU_Over Voltage on the motherboard itself to get this feature?
what motherboard and uefi bios is he using in the tutorial? I have asus prime z390-p and it doesnt have those "ai recommended values". My processor is 9700k coffee lake. I wonder if theres any special consideration to take there. I also have 4x8gb ram gskill ripjaws DDR4 3200mhz. Im not sure if the xmp profiles will work and should I take xmp i or xmp ii
how do I overclock a Pentium iii 1.4 GHz on a gateway millennium pc?, the computer is really slow and I would like to upgrade components but I read about overclocking online, and got me interested if I can save some money, (^.^)
My version of Dual Intelligent Processors 5 doesn't have this AI Overclocking option you showed us at the end... why? Also changing things in TPU doesn't show any change in CPUID... I am running a i5 4690K on a Z97 Pro Gamer motherboard.
weird. my z390i gave me 5ghz on 3 cores. but only 4.2ghz on the rest (9900k). i have it on a 120mm aio. i did just re install windows. maybe i need to game a bit for it to learn more?? or what should i do to get a bit more out of the chip? i am not comfortable doing all the manual changes.
Have the prime z390-a with I9 9900k If I go to that Gui that shows Normal and try to use it. Says the cpu is locked. But If I go to the tweaker area can set all the cores to 5gig and my third part monitor shows all cores in real time at 5 and not the 3.6. Is this different than that gui cannot change? confused
I got similar build asus z390e gaming mobo with a i9 9900k and overclocked to 5000mhz like he did with the same settings but when I went to realbench and did a regular test it had no issue but when I did stress test and it got like 5 min into the test it crashed with the error clock_watchdog_Timeout. Any idea on what that means, and a fix?
@newegg studios please help after I OC when I turn the pc on then it will turn off for 2 sec then boot normally I was wondering if this is nomal on OC setting?, I have Maximus XI mobo, i9900k cpu.
If you are looking for our specialized OC boards then these would be the GENE and EXTREME. With this in mind, all of the ROG boards will offer a great OC experience. The difference in the VRM design is really only for the absolute most demanding users ( custom water cooling with triple or quad radiator configs or better ).
@@jjguerrero8465 none of those boards seem like a replacement. Where is the X-shaped PCB design? Where is the 2 dimm slots? The ability to disable PCI-E slots via a flip of a switch? The crazy overkill VRM? The memOK buttom? None of those boards are a replacement to the Apex. Please release the Apex. Apex is built to smash records!
40:07 Why is it that the Core Speed in CPU-Z only drops down after running the CineBench test? Why was it not already running at a lower frequency when the system was idle before the test?
this ai overclock system is complete garbage, at least for me. everytime i boot up my system i get a blue screen and windows wants to restart my pc. it tries to run my 9700k at 5.1 ghz on all cores
Hello, I installed the suite but i cannot see the AI overclock button. I see DIGI+ VRM panel, EPU, TurboV EVO, Fan Xpert4. PC cleaner. Can someone let me know what am I doing wrong. Also is there a way to do the ai overclock in the bios? I would prefer to do it there. Thanks
You don't have to OC the CPU, but XMP is technically an OC itself. 2400 MHz is the ram standard, if the ram is sold at anything higher, it requires XMP to get there.
I tried the adaptive vcore on my Z390-H Gaming (9900KF). Does not work... tried everything and keeps showing 1.54v and high temps. Offset mode I managed to get 1.45v, far from my stable 1.28V. Bios updated to latest version. Any tips?
I was lucky enough to pick up the only one in stock at my local PC store here in IL. Another location had it in MO and I was actually about go go there.
Pre Ordered mine on Amazon on October 14th and still nothing but will not cancel since the price was so good! Hopefully it will ship out soon? just have to wait and so does my Asus Strix Z390 motherboard!! Sigh :(
JJ and E3OCD are my go too for overclocking...I'm just rebuilding a new system..between both of these guys knowledge my current system has been an OC'd I5 4690k running at 4.2ghz for the last 4 yrs no issues. I just need a new hex core system for DCS World VR. Thanks JJ for the advice, solid as usual. Per Core is the way to go.
I have the ROG MAXIMUS XI HERO WiFi CoD Edition, i9-9900k, Corsair 64GB CMT64GX4M4K3600C18. Aftrr following this, the DRAM is only reading as 1800Mhz in both CPU-ID and OCCT. Can anyone help?
Also need to max turbo mode limits. They are under Internal CPU Power Management. Change Long Duration Package Power Limit=4095, Package Power Time Window=127, Short Duration Package Power Limit=4095. Otherwise the CPU will only turbo for a specific amount of time, this will allow it to turbo forever unless it hits temperature limits then the processor Thermal Control Circuitry (TCC) would protect the CPU.
why is it that adaptive or offset options show voltages in cpuz jumping to 1.42 and more? Settting my cpu to 4.8 ghz all cores at 1.17v on manual is stable and cpuz shows the voltage I set in bios(1.17v). Switching to adaptive or offset will make the pc crash at same voltage. Not only that, but voltages in cpuz jump to 1.4 and up. I've seen as high as 1.60v when trying to set to 5+ ghz on all cores. That's on a z370 maximus x. Edit: I know why: LLC is set to auto and avx to zero. But then what's the point of drooping the voltage with LLC and avx when these will reduce the voltage and speed that we seek?
Set adaptive to 1.28v for starts and use no offset. Set LLC to 6. This will give you 100mv of droop to 1.18v under load. Should be good for 4.8 to 5.0 all cores. Start with 4.8
I have been researching overclocking for two weeks now and this is one of the most informative and simplified videos I have seen.
I completely agree
Unlike other "youtube tech celebrities" who just read off from teleprompter with doodling eyes, I particularly enjoy how this gentleman is truly trying to teach you knowledge with his own knowledge. Great work. I learned so much from this video.
😏
There has been a great deal of confusion regarding AVX vs non-AVX, LTT vs HardwareUnboxed bench marks, standard/expected temps vs overheating temps. This video at 12:35 Understanding key aspects of overclocking frequencies, AVX, voltages, cache ratios and more...clears all that confusion up. Up until this point no other channel that I viewed explained this so clearly, although HardwareUnboxed came close. EXCELLENT job explaining these parameters and giving an overclocking tutorial, which I plan to use on my Asus Z370 as well. Thank you. P.S. I subscribed due to the quality of this video, so Newegg is indebted to JJ...:-).
This is why I love Asus, their features and intuitive interface and ..... no no no forget all that, I like Asus because they employ THIS guy. lmao
Personally every Asus product I have ever owned has had a defect of some kind, both motherboards, a router and a tablet all had issues or failures.
Juan José Guerrero, muy buen tutorial. Deberías hacer uno en español si es que lo hablas, tienes una manera única y simple de explicar las cosas. Gracias por tu atención.
the AI was recommended OC 5.2 for me i kept getting blue screened on start up
Tuf yea on the cooler prediction I told the AI to stop learning at a score of 160. My cooler is a beast so it kept getting a better score causing the AI to push the OC. this is on a asus maximus hero Xi WiFi
@@paulfresh AI overclocking isnt as great as manual. Sometimes motherboards use way too mich vcore.
I did my first PC build, and I'm able to over clock because of this guy,every thing when perfect at one try, thanks to you🙏🙏🙏
Loving my i7 9700K. Gets the job done ✅
same its a gaming powerhouse
The best overclocking video on the internet ! Thanks mate
I watched your video 3 months ago and right now also....plz let us know about how to undo overclocking...plz plz
I'm using the Asus z390-E. Will that over clock the i7-9700k?
i9 9900k 5,1 ghz at 1.340 volt with full avx
Fabian S fully stable under certain load ? Like games.
What's the difference between a 5ghz overclock on the first few cores and turbo boost? Isn't that the point of intel's turbo boost? Or is a 5ghz overclock become the baseline and turbo boost then jumps up above that?
JJ is a true professional and the only tech guy I turn for my builds and hardware/software upgrades. Sorry Linus Tech tips, sorry Gamers Nexus
Why were the power limits not removed?
Maybe auto is enough
cause when he chose the xmp overclocking profile the board asked him if he wants to operate at intel stock specs or not. it was not a confim of the xmp profile.. it was more than that and lifted all the things that kept like the power limits and boost timings and all that. i think its also called multicore enhancement on asus. i recommend not using that stuff and applying settings manually
good video, i have a question i have this procesoor on asus prime z390-a but when enable turbo boost on bios when i starts windows always appears blue screen and reboot the system automatically (only when enable turbo boost) if i disable it windows starts normally, can you tell me how to configurate my procesor to avoid windows restart when i enable turboboost?
Luis Roberto Barcenas Herrera I get the same
when using the AI do you still use the XMP profile ?
I have an issue that I can't seem to solve. I'm running a 9600K on a Prime z390-A board, and have manually OC'd to 5GHz @ 1.35V (same exact steps as in this vid). This is perfectly stable and HWMonitor shows me running @ 5GHz at boot. The problem - any stress test I run (AIDA64 and Prime95) down clocks the CPU way low (4.4GHz). I know it is not a throttling issue for 3 reasons; all my temps are extremely low, including my VRMs, wattage consumption isn't exceeding any limit, and when I tried enabling the automated AI utility, it OCs to 5.1GHz and when I run a stress test, it does not down clock, so there IS a setting SOMEWHERE that AI utility adjusts, which prevents the down clock. I highly dislike the AI OC utility, so I'm aiming at doing it all manually.
Things I've tried:
Disabled AVX offset in case the stress tests utilize AVX
Disabled ASUS MultiCore Enhancement
Set LLC to max (dangerous I know)
Set Short/Long Duration Power Limit to max (4095)
Setting manual voltage
Setting adaptive voltage
Disabling XMP
Disabling Intel SmartStep
You may say just use the AI utility then, and well, it applies an extremely high voltage (1.45V) and uh, it randomly changes my ratio to 5.4GHz @ 1.55V in the MIDDLE of running games (despite me manually setting it to 5GHz @ 1.3V), which of course crashes my PC and forced me into OS recovery.
Any luck with this mate? i have the same setup as you
Very informative Juan , love these types of videos you make! really helps me a lot.
JJ is the reason I started buying ASUS boards way back in 2012! Excellent video :)
really best guide out here, thanks a lot! and I really lmao with that easy AI auto clock! what a great app.
Damn, 5GHz at essentially 1.2v on a 16 thread cpu. My 4 thread 2500k needs 1.34v (with load line calibration) at 4.4GHz.
Amazing video, thank you. I'm picking up my 9900K in the mail today, finally!
Thank you - excellent video - explained my motherboard features much better than a manual!
My i9600k was stable on 5.1 ghz (all cores) without touching the volts, got lucky I guess. Running Prime95 the asus rog strix went up to 1.2825v on max (6hours) 5.2ghz was fine on 1.35 , but sticking to 5.1 for longevity. ON AIR COOLING! The watercooling would probably just make better thermals, but I believe that 5.2 is the most u get out of this one, 5.3 @ 1.46v would eventually crash.
Finally a proper guide step by step. Thank you sir and Newegg!!
Hello
I overclocked my 9900k with a h100 cooler on a asus tuf z390 plus gaming. I used all your settings and ended up with a 1.6vcore. Can anyone tell me why this can be happening.
Hey Nice video, but it didnt realy answered my question. I have 9700k dark rock pro 4 and z390 aorus elite. Everything is stock and im getting over 80c degrees in games. I was wondering what settings should I pick for vcore aka voltage and what numbers? I dont wanna OC it, I just want to bring the temps down. Can you please help me?!
im no expert, but try looking at a tutorial about undervolting your cpu.
This is the best usefull video i have watched for a long time so big respect to you taking few hours of time and making this. 👏
Good Video, could you show us how to overclock RAM and the Timmings?
thanks !!!
It's like Santa's workshop for geeks behind him, I am jelly.
You should take the time to adjust one value at a time so you know which made your system stable. Use AI Suite in windows to do this quickly. Use 5min prime95 blend after each adjustment. Check the BSOD code for what part of your cpu failed and adjust accordingly.
This software would benefit if you could actually revert to default settings after the AI Overclocking - unless there is a way to do this can someone help? I'm on auto overclock with my i9900k sitting at 5.1GHz but I'd like to revert back now.
Thanks in advance
Reset your bios to defaults it should fix it i think.
So is realbench just broken? I get an error using 2.56 'Unable to property parse system specs. Please report to RealBench forum' however this is reported there already with no response other then it isnt really supported any longer?
That only show me that the 9900k ran a 2110 cb score the first time then Throttled on the second run with a score in the 1700’s.. so with that in mind is that because of temps or is in because of the power limits not being max out ?? Plus imo the 240 rad you got on there is nice looking but it’s no good for that cpu
BlowUpDaChr0n my 8700k just hit 1720
my ryzen 1700 hits 1749 cb soo ... it just tanks when you don't move up your power limit but with more power comes more heat and that 240mm is a joke for that cpu ... im going to run some test on a retail chip ... ill let you know
I notice that also, no wonder the camera panned away from the screen. You can actually see the CPU speed drop from 5ghz to 3600mhz in cpuz. Check time stamp 36:45
Current throttling, need to set CPU Current Capability to 170%. ua-cam.com/video/wpSMW27gzzo/v-deo.htmlm43s
I have the Hero XI (WIFI) and the following RAM
G.SKILL TridentZ Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 4400 (PC4 35200) Intel Z370 / X299 Desktop Memory Model F4-4400C19D-16GTZSW
When I use any of the XMP settings I get a MEMOK error, and have to under clock the RAM to 4000mhz in DRAM Frequency.
What am I doing wrong? is there anyway to get the XMP working and use the RAMs full potential?
Thanks a lot man, you are very cool. Like, literally, you explained everything calmly. I didn't think I'd watch the complete video, but your presentation and the content of this video, really didn't let it feel like it was a hour long. :)
I'm new to OCing - would this be relevant for a ROG Strix Z390-H Gaming board?
How to undo overclocking... asus z 390 e gaming... with i9 9900k
Intel speedstep is OFF and Manual voltage since 6 years on my i7 4770k. 4.4Ghz 1.25V. Running 24/7. No problems at all.
I have a hero xi with 9900k and a nzxt 360 aio and my temps are through the roof compared to yours.
Great Video. Normally the first thing I do when getting a new PC is look at the bios settings.. When I got my new PC loaded with a Prime Z390-A board and looked at the bios settings I was a bit overwhelmed with the choices. This video should be listed in the users guide.
You’re a walking legend. Got my 9700k OC’d to 5.0Ghz @ 1.24v stable... now the question I have is adaptive mode. I can’t get adaptive mode set to hit a max of 1.24v... when I set it in bios I boot up at 1.31v and it’s also my voltage while gaming. How can I set a specific voltage as my max on adaptive? In my case (1.24v)
dude theres no way, its because it looks like its auto increasing it to 1.31 because it cant go off 1.24. that would be potentially the best 9700k in the world. 1.31 is what it needs on yours to achieve 5ghz. set it to 1.31 and leave thats really good for a 9700k. I am at 1.34
I would like to vote for a full walk through of all mobo features. I have been system building for 30 years and have never really found a good explanation of all the advanced features from either the manual or any online resource. Thanks!
Fantastic, super informative. This is why i buy ASUS boards. Thanks
My i7 10700K sits at 4900mhz at 1.275V on manual, I switch to Adaptive, set the turbo to 1.300V, now the vcore shoots up to 1.400V.... WTF???? Surely I'm missing something.... AI Suite ramps up the voltage to 1.470V, that cannot be good....
Hi there, I have an Asus Rog Strix z390e motherboard and I do not have the "Adaptive" voltage mode option in my BIOS. Do you think I will need to move the jumper for CPU_Over Voltage on the motherboard itself to get this feature?
what motherboard and uefi bios is he using in the tutorial? I have asus prime z390-p and it doesnt have those "ai recommended values". My processor is 9700k coffee lake. I wonder if theres any special consideration to take there. I also have 4x8gb ram gskill ripjaws DDR4 3200mhz. Im not sure if the xmp profiles will work and should I take xmp i or xmp ii
how do I overclock a Pentium iii 1.4 GHz on a gateway millennium pc?, the computer is really slow and I would like to upgrade components but I read about overclocking online, and got me interested if I can save some money, (^.^)
My version of Dual Intelligent Processors 5 doesn't have this AI Overclocking option you showed us at the end... why? Also changing things in TPU doesn't show any change in CPUID... I am running a i5 4690K on a Z97 Pro Gamer motherboard.
15th guide on overclocking 9900K with Z390 Aorus Board. Lets see if this work
weird. my z390i gave me 5ghz on 3 cores. but only 4.2ghz on the rest (9900k). i have it on a 120mm aio. i did just re install windows. maybe i need to game a bit for it to learn more?? or what should i do to get a bit more out of the chip? i am not comfortable doing all the manual changes.
When I followed your method on the 5.0 overclock with adaptive mode and ran cinebench my temp went all way up to 87 isnt that too high???
Never benchmark/stability test on adaptive vcore
Have the prime z390-a with I9 9900k If I go to that Gui that shows Normal and try to use it. Says the cpu is locked. But If I go to the tweaker area can set all the cores to 5gig and my third part monitor shows all cores in real time at 5 and not the 3.6. Is this different than that gui cannot change? confused
I got similar build asus z390e gaming mobo with a i9 9900k and overclocked to 5000mhz like he did with the same settings but when I went to realbench and did a regular test it had no issue but when I did stress test and it got like 5 min into the test it crashed with the error clock_watchdog_Timeout. Any idea on what that means, and a fix?
@newegg studios please help after I OC when I turn the pc on then it will turn off for 2 sec then boot normally I was wondering if this is nomal on OC setting?, I have Maximus XI mobo, i9900k cpu.
Brilliantly informative video, thanks for clearing up some OC mysteries.
When will the ASUS MAXIMUS APEX XI be released?
If you are looking for our specialized OC boards then these would be the GENE and EXTREME. With this in mind, all of the ROG boards will offer a great OC experience. The difference in the VRM design is really only for the absolute most demanding users ( custom water cooling with triple or quad radiator configs or better ).
@@jjguerrero8465 none of those boards seem like a replacement. Where is the X-shaped PCB design? Where is the 2 dimm slots? The ability to disable PCI-E slots via a flip of a switch? The crazy overkill VRM? The memOK buttom? None of those boards are a replacement to the Apex. Please release the Apex. Apex is built to smash records!
I guess asus changed their bios because I can't select the core frequency, which isn't showing up under Extreme Tweaker.
This was really helpful! Thanks for sharing newegg :)
40:07 Why is it that the Core Speed in CPU-Z only drops down after running the CineBench test? Why was it not already running at a lower frequency when the system was idle before the test?
I dont like using cpuz I reccomend using aida 64 thermals as a guideline on where your CPU stands.
Cant believe this video is so underrated, you just teached me and encouraged me to OC my new rig, thanks a lot!
this ai overclock system is complete garbage, at least for me. everytime i boot up my system i get a blue screen and windows wants to restart my pc. it tries to run my 9700k at 5.1 ghz on all cores
Is it safe to run 4.9 GHz at 1295 V on a gigabyte designare z390 w/ i9 9900k 3.6? Thank you
my i9-9900k is runing at 4.70-4.60 GHz is this normal and did it come overclocked
Great job Juan. This kind of candor and insight is why I love ASUS mobos
I can only imagine those voltage peaks the cpu is getting with 1.45v on vcore and a level 8 llc...rip xD
I have the z390 w/ 9900k but I do not have the "prediction" section. Any reason why?
When I run cinebench, my core clock drops to 3600 even with AVX offset set to auto as in his example.
Thanks for making my pc stable again. Now just need a better cooler 😅
w8 how you oc at 5 and your vcore droop to 1.208 🤭 .. i think if you used OCCT at avx load you gna crash 😂😂
Hello, I installed the suite but i cannot see the AI overclock button. I see DIGI+ VRM panel, EPU, TurboV EVO, Fan Xpert4. PC cleaner. Can someone let me know what am I doing wrong. Also is there a way to do the ai overclock in the bios? I would prefer to do it there. Thanks
AI overclock is only supported on Z390 boards
Hello. I am using asus z390-h gaming
ı got rog maximus hero xı and i9 9900k ım need a bios update ? or how can I learn this motherboard base bios version
How about a video on "undervolting" at stock frequency?
Delete the program ASUS AI Suite 3 and there will be a stable overclocking!!!
Nonsense. My 8700k overclocks to 5.2 GHz. Ai Suite causes no issues. 5WO itself overclocks to 5 GHz... again no issues.
Cinebench R15 is not very good indicative of a stable OC.
Great video! Do I have to OC my cpu to enable my XMP Profile? Or can I just enable XMP without OC?
You don't have to OC the CPU, but XMP is technically an OC itself. 2400 MHz is the ram standard, if the ram is sold at anything higher, it requires XMP to get there.
JJ, how do you get all 16 of the logical processors to show up in Task Manager I only see one?
I will say that despite the niceness of the tutorial, my system crashed no matter what following a lot of these parameters
My CPU is stuck at 5 GHz when in idle... Do you have any idea on how to fix that?
Change windows power plan to balanced
I haven't overcooked anything and I'm at 218514. That good?
Can I use the exact same setting for 9000k and z390 rog strix e gaming ?
New Drinking Game:
Drink every time he says "Essentially". Have fun.
drink on "actually" for maximum drunkenness
Great teacher. Thumbs up man. Thank you!
I love how in depth hes gone, id also love an in depth RAM overclocking guides cause im pretty sure it doesnt exist anywhere else.
How do I fix my computer says missing operating system 😔
Fortnite on his desktop -triggered
Where's the option to sync all cores on the latest bios on z390?!
I tried the adaptive vcore on my Z390-H Gaming (9900KF). Does not work... tried everything and keeps showing 1.54v and high temps. Offset mode I managed to get 1.45v, far from my stable 1.28V. Bios updated to latest version. Any tips?
is there a way to download that Uefi Bios? Cuz mine isnt like that
Absurdly well done tutorial. Well done and thank you.
Next Newegg Vid: Step by step, in depth guide for actually getting the i9900k IN STOCK SO WE CAN ACTUALLY ORDER IT!😒
i had it pre order and its only now being shipped soo... if u are waiting for one it won't be in till nov 21 soo ... with newegg anyways
BlowUpDaChr0n damn that’s ridiculous. Who’s responsible Intel or Newegg or miners?? Sounds to me like Intel for the shortages.
@Dan i got my 9900k today
I was lucky enough to pick up the only one in stock at my local PC store here in IL. Another location had it in MO and I was actually about go go there.
Pre Ordered mine on Amazon on October 14th and still nothing but will not cancel since the price was so good! Hopefully it will ship out soon? just have to wait and so does my Asus Strix Z390 motherboard!! Sigh :(
JJ and E3OCD are my go too for overclocking...I'm just rebuilding a new system..between both of these guys knowledge my current system has been an OC'd I5 4690k running at 4.2ghz for the last 4 yrs no issues. I just need a new hex core system for DCS World VR. Thanks JJ for the advice, solid as usual. Per Core is the way to go.
couple up with the msi overclocking french guy :)
I have the ROG MAXIMUS XI HERO WiFi CoD Edition, i9-9900k, Corsair 64GB CMT64GX4M4K3600C18.
Aftrr following this, the DRAM is only reading as 1800Mhz in both CPU-ID and OCCT.
Can anyone help?
You need to multiply 1800 x2 to get the memory speed. So 1800 is the rated 3600 you are looking for.
After you rebooted your PC (after the first UEFI BIOS oc) how long did it take to come back on?
Mine was on, but nothing showed on the screen for a solid 30-40 minutes until I safe mode restarted it.
Can someone tell me what the music in the background is?
That freqency drops on this light load of cinebench is a termal or power limit? Its not looking soo good...
Right? Second run was like 400 pts lower.
Need to set the current capability, see here: ua-cam.com/video/wpSMW27gzzo/v-deo.html
Also need to max turbo mode limits. They are under Internal CPU Power Management. Change Long Duration Package Power Limit=4095, Package Power Time Window=127, Short Duration Package Power Limit=4095. Otherwise the CPU will only turbo for a specific amount of time, this will allow it to turbo forever unless it hits temperature limits then the processor Thermal Control Circuitry (TCC) would protect the CPU.
why is it that adaptive or offset options show voltages in cpuz jumping to 1.42 and more? Settting my cpu to 4.8 ghz all cores at 1.17v on manual is stable and cpuz shows the voltage I set in bios(1.17v). Switching to adaptive or offset will make the pc crash at same voltage. Not only that, but voltages in cpuz jump to 1.4 and up. I've seen as high as 1.60v when trying to set to 5+ ghz on all cores. That's on a z370 maximus x. Edit: I know why: LLC is set to auto and avx to zero. But then what's the point of drooping the voltage with LLC and avx when these will reduce the voltage and speed that we seek?
Set adaptive to 1.28v for starts and use no offset. Set LLC to 6. This will give you 100mv of droop to 1.18v under load. Should be good for 4.8 to 5.0 all cores. Start with 4.8
very nice explained and a very nice voice to liten to!