Full-Frame Suspension Motorized Bike: Build & Ride

Поділитися
Вставка
  • Опубліковано 11 січ 2025

КОМЕНТАРІ • 134

  • @danielmacdonald3130
    @danielmacdonald3130 8 місяців тому +17

    this might not have a great deal of views, but just know most of us who did watch are genuinely enjoying and appreciating the content i can confidently say

  • @jasirusrox8782
    @jasirusrox8782 Рік тому +4

    Bro you should monitize that Swing arm concept. it's great, and unique. I can almost garantee someone would pay a huge amount for this idea.

  • @niteshades_promise
    @niteshades_promise Рік тому +18

    I was told you cant put a motor on a rear shock bike. This guy, "hold my beer". Nice job😂🍻

  • @TH3-MONK
    @TH3-MONK Рік тому +6

    Very impressive. That rear swing arm is genius.

  • @kimmyers1543
    @kimmyers1543 Рік тому +3

    Mr. Kim here that is a wild looking bike you must have a great imagination well I hope to see another one of your videos

  • @beegee84
    @beegee84 6 місяців тому +1

    Nice job!
    Some stand up gas scooters that have suspensions are a straight swing arm swap!
    All you'll have to do is run throttle and brake cable.. but you will have a small diameter rear wheel,
    still works well. Also swap rear spring with mountain bike shock.
    Great job looks legit!

  • @jarule275
    @jarule275 Рік тому +8

    I feel like the seat and handle bars moved back would look better, but...GREAT job.

  • @Buggysbuilds
    @Buggysbuilds Рік тому +8

    really hyped to see this build! I sketched, and physically mocked up something similar but never followed through. really nice to see it actually completed & running

  • @mikemiller3303
    @mikemiller3303 Рік тому +5

    Awesome build thinking outside of the box hell yeah ride safe brother

  • @robertcdicus9223
    @robertcdicus9223 Рік тому +5

    This is a great build. I bet it will do awesome off road.

  • @slothzombi307
    @slothzombi307 8 місяців тому +1

    Cool tour of your quaint town.. and the bike is great too.

  • @LennieWire
    @LennieWire 4 місяці тому

    Awesome engineering , like this because most think of this kind of bike for biking .you have opened a whole new way of motoring up a different kind of bike .maybe a patent part for them . Everything worked out so well .exhaust is a favorite ,in a perfect place .!!

  • @frankdelaney6316
    @frankdelaney6316 7 місяців тому +1

    Great imagination, very resourceful. Best build ive seen yet.

  • @perlidberg7351
    @perlidberg7351 Рік тому +2

    Inspiring. I ran straight to the garage after I saw the video 😂

  • @kimdecastro9156
    @kimdecastro9156 Рік тому +3

    can't wait to see it go down the road. what a crazy build👍

  • @DirectCurrent4u
    @DirectCurrent4u 6 місяців тому

    Kool set up! You can go about 18 to 20 degrees on your carb angle. Mine is at 20 degrees and all I hade to do was lower the floor just a little bit. I hope it screams and has a smooth ride!👍

  • @justplayinwitharound
    @justplayinwitharound 6 місяців тому

    i have to say man , genius !!!!! love the build

  • @sattler1990
    @sattler1990 8 місяців тому +1

    honesty she looks like a beast

  • @perlidberg7351
    @perlidberg7351 Рік тому +1

    Very good job, really fun to see you custom build this bike. Wow🔧❤️💪

  • @raymondcoleman149
    @raymondcoleman149 7 місяців тому +1

    i like it,good job dude.

  • @ajmotorsport2987
    @ajmotorsport2987 Рік тому +1

    Sick work 💯 on that full suspension mountain bike aka full suspension motorized bicycle

  • @grendelsgarage9723
    @grendelsgarage9723 Рік тому +3

    This thing will be interesting!!! Nice man. I love a monster build.

  • @colemantrailslayer
    @colemantrailslayer Рік тому +2

    That’s awesome , I’ve always wanted rear suspension.

  • @11bayrat
    @11bayrat Рік тому

    Nicely done. Looks like your back wheel is trying to catch up to u as you drive by.lol. Lots of luck. Thanks for sharing

  • @AutoCannonSaysHi
    @AutoCannonSaysHi 7 місяців тому

    Alright!
    I was looking at my full sus bikes around, and my new gas bike trying to figure out what to do about it.
    This has thing beats my ass where I often find myself would rather stand up or float on my feet a bit cause I'm often off road. So hitting rocks bigger than road grade is just Muuurder when you're don't see it coming or you're whipping along in medium and higher RPM and they sneak attack you. Got big ol' fat tires on it with downhill rims, spokes and Axel's that built years ago, which help, but it's a limited solution.
    This'll push me in the right direction . This is awesome.

  • @beckwerks
    @beckwerks Рік тому

    Our parts bikes collection looks almost identical... I even have a MAGNA like yours. I got it for the rims and disc brakes. I have a full suspension frame project going like yours but mine is a trike. Made my own rear axle set up using trampoline frame tubing and a roller with bearings from a treadmill...

  • @JeffreyKemper
    @JeffreyKemper Рік тому

    Stretched frame and add a gas motor on a bike with a suspension.
    With a 21 speed tranny.
    Better get heavy duty wheels. The spokes will not take it very long.
    Honestly, you could use a motorcycle frame, and add the small engine and a hydraulic system to power the rear wheel.
    Tip: large volume hydraulic pump motor to a low volume hydraulic motor.
    ( 10 gpm to .5 Gpm) @ 900 p.s.i. or you can crank that up too to10,000.p.s.i.!❤❤❤
    You just got a high speed/ high torque croch rocket!😮😮😮

  • @BrIce-r9m
    @BrIce-r9m 3 місяці тому

    I been running my bike 2 yrs no filter down many gravel roads the bar of the frame stops anything. I may have a few specs on the lip but still going strong

  • @4514rooster
    @4514rooster 9 місяців тому +1

    Nice ride!

  • @michaelbrinks8089
    @michaelbrinks8089 Рік тому +4

    Great Job!! I've been wanting to do similar for a long time but no more garage/workshop or 240V outlet for my welder. (Or physical energy) Even a generic mtn bike suspension is WAY better than a hardtail when you're hitting bumps in the road at 35mph.

  • @hydralizk6631
    @hydralizk6631 2 місяці тому

    This thing is cursed and beatiful at the same time

  • @cuthbertedmundv.escobar5853

    Very nice bro,I will build that too and copy what you did for the smooth running,thanks for sharing bro,from Philippines

  • @jmrides777
    @jmrides777 Рік тому +1

    Haha....excellent job bud! I wanna see some performance vids with the custom suspension.

  • @keithboggs1783
    @keithboggs1783 Рік тому +1

    Great video man.I have to try this.

  • @GONE4GOOD79
    @GONE4GOOD79 Рік тому

    I haven't seen your channel for ages h it's good and interesting to see what you're up to now days

  • @justanothermotorizedbikech
    @justanothermotorizedbikech Рік тому +2

    Man this build is too rad👍🏼

  • @MRGarcia1983
    @MRGarcia1983 7 місяців тому

    awesome build

  • @randallchunn8286
    @randallchunn8286 Рік тому +2

    I can’t believe how much snow you all have laying around still. Have you figured how fast it will be? I know you can’t do that at the moment! What a build!! I love it❤. My friend and I have finally got the tribute bike done and would love to show you some pictures of it if possible 😊 don’t slide 🛝 and save that hide…..

  • @alnardoperez1585
    @alnardoperez1585 Рік тому

    Making a long story short those suspension frames are perfect for an electric bike build .

  • @alexanderson5749
    @alexanderson5749 Рік тому +1

    It's surprising how good the cheap full sus bikes are because I had one for a short period of time as people were saying it was fucked but it just needed a bit of love and I pretty much road it till the frame gave up

  • @BurntKittyForge-pl8ol
    @BurntKittyForge-pl8ol Рік тому

    i've pondered cutting one bike frame in half so the rear tire section to the seatpost bar on the frame and the pedal crank , so anyway the pedal crank hole (where the pedals mount on the frame, crank removed, bearing /bushing inserted there ) mounts where the back wheel goes then the bike is stretched because it has the rear section of one frame mounted through the pedal crank hole to where the rear tire usually is the shock could mount from the seat post pole to higher up behind the seat on the frame more horizontal than vertical ....

  • @diydarkmatter
    @diydarkmatter Рік тому +1

    pretty cool brother .

  • @bobbymorea5349
    @bobbymorea5349 Рік тому

    Dude that is crafty buddy I love it that's my next move and thank you

  • @LandRiderJerryautoshift
    @LandRiderJerryautoshift Рік тому +1

    So the bike around 23:43 of the video, are you building an engine automatic drive system? CVT to duel sprocket jackshaft. What engine did you use?

  • @DrLove911
    @DrLove911 Рік тому

    Im building one like this . Great idea very innovative

  • @axelthorfilms
    @axelthorfilms Рік тому +1

    Damn I wish I was that lucky when things are close like with the chain and carb. With me it all would have hit and have to be re rigged/engineered. You got a hill climber.

  • @cesarpagan4640
    @cesarpagan4640 Рік тому +2

    If that was my bike, I would drive it like I stole it. Plus you’re in the snow let the power bands kick in slide around make it fun for us to watch

  • @chriscordray8572
    @chriscordray8572 6 місяців тому

    If I could only dump pictures 📸 I re-imagined that same bike by cutting the frame and flipping the front section and making it only inches from the ground.

  • @mattparker9726
    @mattparker9726 Рік тому +1

    LOVE this build!

  • @MisterDivineAdVenture
    @MisterDivineAdVenture Рік тому

    SUPER STOKED new found talent now you're going to have to surpass it

  • @stephenjohnson6967
    @stephenjohnson6967 Рік тому +3

    Great job! It's amazing how well it's maiden voyage went. I really like your tank mount. I've had so many issues with my tanks shifting on the top tube it's ridiculous.

  • @RadioSaladStudios
    @RadioSaladStudios 8 місяців тому

    Looks like a drag bike, Genius.

  • @robletto841
    @robletto841 Рік тому +1

    Nice done!!!

  • @JAM-zb2vh
    @JAM-zb2vh Рік тому

    great build now that is a true build a custom build at that.

  • @PatrickKocha-d4q
    @PatrickKocha-d4q 9 місяців тому

    You did a really good thing here low center of gravity and nice longer wheelbase the lights to be very stable pretty much this guy needs to go design Ferraris

  • @oimpastato
    @oimpastato Рік тому

    Excellent job

  • @DNANDROID
    @DNANDROID 5 місяців тому

    Very nice! A jem really.

  • @LuizMarcelo-lv4ow
    @LuizMarcelo-lv4ow 5 місяців тому

    Tenho um projeto desse no meu canal . Depois de muito tempo procurando achei algo parecido; motor de bike na parte traseira da bike. Ficou muito bom , o meu não está tão bom assim mas vou dar uma melhorada. Gostei ficou ótimo.

  • @ΒαγγέληςΣιγάλας-β7π

    a simpler solution for mounting fueltanks for me was using thick Galvanized Metal Perforated Plumbers Tape with some nuts since the tape is flexible and strurdy

  • @rockrl98
    @rockrl98 Рік тому +2

    That's an epic build, is that frame steel or aluminium, I wish I could weld like that lol. I wonder how long it will last on trails, you should also give your fork some love, also, ever had a rim fail on you, do you check for wear and replace?

  • @JMB676
    @JMB676 Рік тому +2

    Did you upgrade the spring to keep from bottoming out so easily now since it’s a much longer lever?

  • @justinstrickland4199
    @justinstrickland4199 Рік тому

    THis is pretty cool. nice job, how much extra weight did it feal like it added?

  • @JorgeRodriguez-ei2gi
    @JorgeRodriguez-ei2gi Рік тому +1

    Continúe Say hello ,Jorge.

  • @mattparker9726
    @mattparker9726 Рік тому

    10:33 I would worry under load, the shock would damage the spark plug.

  • @BuildBreakFix
    @BuildBreakFix Рік тому

    Absolutely awesome 👍

  • @LAreckless97
    @LAreckless97 9 місяців тому

    I almost bought your bike off marketplace when you had this thing for sale up there.

  • @ericabrams9415
    @ericabrams9415 9 місяців тому +1

    Hello sir can you build for me a bike frame like this? What is the price

  • @bryancomeaux4961
    @bryancomeaux4961 10 місяців тому

    great idea

  • @RyanHiestand-s5c
    @RyanHiestand-s5c Рік тому

    Take out the shock and shock bracket in the middle and place it on the rear

  • @infohere1000
    @infohere1000 10 місяців тому

    hi i someone else put on a relatively new autolite 216 spark plug, is that good enough for awhile? 50cc engine, heavy cheap mt bike, im going to be riding about 3 days a week averaging 10 miles, with small to medium some hills

  • @H3MaS11
    @H3MaS11 Рік тому +1

    awesome build man , im sure you'll come up with more interesting projects in the future

  • @robmcculley6835
    @robmcculley6835 7 місяців тому

    What welding process did you use, flux core, stick?

  • @irekmaster187
    @irekmaster187 8 місяців тому

    you man awesome. All fits

  • @stephenthomas2597
    @stephenthomas2597 Рік тому

    Yo that's amazing

  • @BrIce-r9m
    @BrIce-r9m 7 місяців тому

    very smart design, i did something similar before, can i send u pictures of mine somehow

  • @joneserupinsmoke9161
    @joneserupinsmoke9161 Рік тому

    Hell yea bad ass bro👍👍

  • @beckwerks
    @beckwerks Рік тому

    Make some sides that fit the bike frame and turn that empty space into a cooler stealth fuel tank..

  • @m.kasper7646
    @m.kasper7646 8 місяців тому

    Jet your carburetor according to your altitude, it will run way better.

  • @mauzim
    @mauzim Рік тому

    Very interesting.

  • @RyanHiestand-s5c
    @RyanHiestand-s5c Рік тому

    Move the shock add a bar for the motor

  • @joneserupinsmoke9161
    @joneserupinsmoke9161 Рік тому

    25:ish I'm thinking when u get the rest flex the chains gna hit the engine dnt kn let's watch and see.msybe not cuz the whole system moves together

  • @SuperHurdman
    @SuperHurdman 4 місяці тому

    Where are you located I am in NB Canada!

  • @hemibreath
    @hemibreath Рік тому

    Not trying to be a “UA-cam critic” but you should try to get a Tig welder and practice. The flux core must go !
    Other than that it’s awesome 😎

  • @billy3650
    @billy3650 6 місяців тому

    How much would you charge to put an engine on a full suspension bike if I sent it to you ?

  • @CORYJOHNM
    @CORYJOHNM Рік тому

    That's looks like a hill climber. Cool as heck bud.

  • @KoolRanqe
    @KoolRanqe Рік тому

    I love that I'm not the only person who threw on a 20" wheel on a larger bike for more torque 😅

  • @devdhamija7585
    @devdhamija7585 8 місяців тому

    Saddened to see the upside down backwards solution wasn't implemented.

  • @jwserge
    @jwserge 6 місяців тому

    Hello!
    I think you made a mistake: The rear suspension spring should not be in the center of the frame, but just in front of the rear wheel!
    The rear fork should immediately be pivotable and suspended, not in the center of the frame!

  • @lamarstephen17
    @lamarstephen17 Рік тому +1

    👍✔️

  • @ericabrams9415
    @ericabrams9415 9 місяців тому

    Please, please, bring this to a bike manufacturer so that it can be mass produced. This frame makes all other frames obsolete for motorized bicycles

  • @ianmangham4570
    @ianmangham4570 Рік тому +1

    Put a piece of pantyhose over carb to keep dust out ,tightened with a zip tie

  • @thecbc7658
    @thecbc7658 Рік тому +4

    40:1 cradle to grave

    • @rockrl98
      @rockrl98 Рік тому +1

      Why is that? Wouldn't more oil, except the plugs, make it last longer?

    • @Westhelockpicker
      @Westhelockpicker Рік тому +1

      I run 32 to 1

  • @DAT_BIKE_LIFE
    @DAT_BIKE_LIFE Рік тому

    Awesome

  • @JorgeRodriguez-ei2gi
    @JorgeRodriguez-ei2gi Рік тому +1

    Shote lets see Mr pulsar already suscribe.

  • @hillbillyexpress8968
    @hillbillyexpress8968 9 місяців тому

    Great job but Those welds though

  • @MightyDuckGaming
    @MightyDuckGaming 3 місяці тому

    That’s basically a dirtbike

  • @christopherlastname7638
    @christopherlastname7638 Рік тому

    Nice

  • @Rebar160
    @Rebar160 9 місяців тому

    Are you a professional welder

  • @tedoverton8199
    @tedoverton8199 Рік тому

    I'm pretty sure your going to have a meltdown when you lean on it hard for a long period, the fins on the jug are not going to get proper airflow at the angle you mounted the motor.

  • @fletcherjacobs3688
    @fletcherjacobs3688 10 місяців тому

    You can run 40:1.