Basics of Structural Design Load Calculations | One-Way Vs Two-Way Slab
Вставка
- Опубліковано 12 кві 2022
- Learn the basics of load and its load path, what are the considerations in assigning loads in a structure, and the load calculation procedure necessary at the start of Structural Design.
Join us and become a member, exclusive perks await you! / @thestructuralworld
Subscribe to our Channel for Free: bit.ly/tswsubs
Refer to related article:
www.thestructuralworld.com/20...
www.thestructuralworld.com/20...
===================================================================
Visit our website for related blogs: www.thestructuralworld.com
LIKE us on FACEBOOK: / thestructuralworld
Join our FACEBOOK Group: bit.ly/tswfbgroup
Follow us on Twitter: @the_structural
===================================================================
For any concerns, contact us at: thestructuralworld@gmail.com
===================================================================
Softwares Used in Editing this Video:
Video Editor: bit.ly/filmora9editor_tsw
Doodly: paykstrt.com/2073/41311
Narrated by: bit.ly/speechelo_tsw or www.fiverr.com/s2/d7ad02b9c9
===================================================================
Disclaimer:
The Structural software used in these videos is for educational purposes only and not for commercial use.
Thanks sir this lesson is very impprtant
Please more lessons about structure
Like beams to transver to column and then column to transver to foundation
Foundation to transver to the soil
All elements bs8110 british code please help me all elements design and analysis and detailing
jaamacadeed dhigataa sharmaarkaw
Beautiful informative video. I'm an Architect but I'm interested in calculating structures so the next step is to calculate loads on columns by dividing the total DL and LL on slab trapezoidal and rectangular areas by 2 between each 2 columns. Then moves the next more complicated phase which is calculating shear and moment force then shear and moment stress then moment of inertia then deflection of beams then column buckling and insuring values are on factors and less than the maximum factor value. Can you make another video about column load calculation ? Thank you ❤
Great video! Thank you for the help!!
A great video. Thank you very much
great tutorial. thank you very much.
Very good video , thanks 🙏🏼
Worth subscribing
Very informative. Thanks for sharing.
Thank you for sharing this interesting engineering structural design…
Really Informative
Thanks for sharing
This video is wonderful thanks a lot sir
Thank you so much...
Great video
continue these lectures and make video for whole g+3 building calculation including cantilever slab, inverted Beam, sunken slab
Good presentation
Very informative
Thanks
You need to revise the ratio L/S limits @minute 4:44. For one way slab, it should be L/S greater or equal to 2, and for two way slab L/S only less than 2. Otherwise, your example @5:03 isn’t accurate because section AB23 will be two way slab according to your definition. Great video though.
His description is right, but the example is wrong. AB23 should be a two way slab I believe.
I like it ❤
Great vedio. Just please decrease the musics volume
Noted
The trapezoidal load is not the same throughout its length on the beam. The load gradually increased to reach its pack in its middle portion. Same for trapezoidal load. To get the Uniform Distributed Load (UDL) from a trapezoid, even a triangular load, I believe there is a formula. This is what I noted from studying with an engineer here. Interestingly you represented the trapezoidal load as a rectangular when you divide the total load by the length of the beam. Is this procedure ok for slab load calculation only??? Anyway thank you very much. Such explanation are really needed and I really appreciate the way you explain those hard to grasp stuff.
very high volume music of background for such good content
Good
To design a strip in both directions, I need to know the loads on each strip, this depends on the stiffness of the slab in both directions, and assuming that the amount of deformation at both strips must be equal, at that condition loads should be distributed in the correct form. Can you derive an equation to calculate the loads on each strip (note: the difference in slab stiffness depends on the length of the strip and the effect of strip continuity.?
very nice. thanks.
Could you, would you, please ....upload a version without background music,,,, or dim the volumn of background music
Please explain how the soil resist these load transfer by foundation. I'm asking you to discuss soil mechanics.
Sure will consider it.
Can you please give me detailed info on the calculations
Can we have a follow up video to this like Design of beams... like load design
Thanks for the suggestion. Yeah, we will consider it soon.
how much steel required for a slab on grade 300 mm thick to carry a service load of 2.5 tons per square meters. thanks.
Great video can we kill the music
is good information however music to laod and narrative to fast
Sir if all loads are taking from codes
Why structural concrate become hard
Music was way to loud, hard to hear actual commentary. I didnt click on the vid to hear blasted elevator music.
Please the music is too loud and distracting. Lessons are good.Thanx
please turn that music sound low next time
Can anyone give an answer, making a horizontal roof with 5 x 30 cm wood boards (30 cm being vertically) would the boards in 5 meters length bend from it's own weight and snow ?
You need design calculation for that bro.
Good one but work on the noice
Ok the music is too loud and distracting.
1:00 starts the music. It almost drains the speech. -1
broski lower the background music
MUSIC 2 LOUD
عربي ترجمة على الفيديو
I don't understand these types of videos. It's supposed to be for beginners except you have to already be an expert to know what they're talking about. If I already knew all the terminology and reference material than I wouldn't be watching the video in the first place. Who is this for exactly?
ترجمة عربي
خرسانة واحد
What is the purpose of the music? Engineering videos need full concentration. This is not videos about pranks and fashion. If anything at all, it should be very soft low volume classical that aid concentration. Please stop adding music. We can do that on our own
𝐩яⓞ𝓂𝓞Ş𝐦 🤗
Teaching was too fast for a beginner