Це відео не доступне.
Перепрошуємо.
2016-2021 Tacoma Body Armor 4x4 PRO-Series Rear Bumper Review & Install
Вставка
- Опубліковано 14 сер 2024
- Update the appearance of your 2016-2021 Toyota Tacoma by installing a Body Armor 4x4 PRO-Series Rear Bumper. With clean simple styling that surpasses the boring stock bumper, this Pro-Series Rear Bumper looks perfectly at home on both the street and trail. Designed to easily replace your factory bumper, this Body Armor 4x4 Bumper features openings for 2 LED cube lights.
Light The Night. The Body Armor 4x4 PRO-Series Rear Bumper is the perfect solution for night-time trail runners, as it will accommodate 2 LED cube lights. Please note lights are not included - sold separately.
Heavy-Duty Construction. Body Armor 4x4 manufactures its Pro-Series Rear Bumper to precise specifications from 3/16-inch thick mild steel plating for superior strength and rigidity. The Bumper is then completed in a high-grade, textured black, powder-coated finish for durability and long-lasting corrosion resistance. terrain.jp/2YYz60h
Shop this Body Armor 4x4 Rear Bumper: terrain.jp/2YYz60h
🎞Subscribe for Daily Toyota Tacoma Videos: bit.ly/2FtUeUw
Item TT6422
----------------------------------------------------------------
🎞Subscribe for Daily Toyota Tacoma Videos: bit.ly/2FtUeUw
Facebook: / extremeterraintacoma
Instagram: / extremeterraintacoma
ExtremeTerrain.com is your shop for the best in Toyota Tacoma and Tundra aftermarket parts and accessories!
www.extremeterr...
#tacoma #tundra
Shop this Body Armor 4x4 Rear Bumper: terrain.jp/2YYz60h
🎞Subscribe for Daily Toyota Tacoma Videos: bit.ly/2FtUeUw
Great install video but it sure would have helped to see how to install the backup sensors too
Do you make a bumper that DOES NOT have the square holes for the lights? I DO NOT want the rear lights.
An excellent bumper for the price point and better than stock for sure! I just helped my son install one on his rig last weekend.
Very easy to install easy to follow instructions, especially if you have the factory hitch assy installed.
A couple of tips:
1: pull the wire harnes through the license plate light holes, then plug lights into the harnes and insert lights into the holes.
2.The holes for the license plate lights and the plug for the trailer lights are a bit big, allowing for quite a bit of "wiggle" room. To keep the plug and the lights from vibrating, we used some black rtv silicone on the back of them before inserting into the holes. Worked perfectly, once dried the plug and lights feel solid.
3.The wire harness for the trailer lights is too short and no longer reaches once this bumper is installed. Looking for an extension now, otherwise we will be extending the wires soon.
Where do I buy an extension?
@eqlibrium854 what ended up being your solution to the trailer wiring problem? I just got this and am going to install soon. If you see this thank you in advance if you can answer.
I had to end up extending the wires myself.
@@jessehernandez2812I have this bumper and i removed some of the clips holding the harness in order to pull it closer to the connector.
18:50 The hitch plug is not secured. it popped out.
Yea makes me not want to buy since they don’t address it
Yeah, I noticed this - seems odd to make such a nice looking product and miss some of the obvious things.
I saw that too. Doesn't seem like this outfit wants to comment on these issues
If the truck comes with blind spot monitors what can be done with those. This truck did not seem to have them and did not see the brackets for them?
I now know why there isn't a video install on the bumper and how to install the rear sensors. It's a complete joke to install them. Plan on double the time from this videos suggested time frame.
@TheButterbean911 - any tips on how to install the rear sensors? Manufacturer’s written instructions are also a joke.
I just did mine and it took an hour and a half. The instructions show you how to install the backup sensors, that what the tiny screws are for. Pay attention people.
Not to mention you break those things taking them out. 265$ a lice unless you can get the grommet
They failed in one little detail: they need to cut out the two hole for the factory license plate lights, for the entire assembly, no just the lights. The license plate lights will be shining upwards.
Just installed this bumper on a 2017 tacoma sport and the wire for the trailer connector doesn't reach I had to do some cutting and be careful with the back up sensor because they are very easy to break oh and the license plate lights are very loose and in the video they didn't move them because they also know 😀
also had to cut too! disappointed!
TWO IMPORTANT TIPS:
1. if you do have the parking sensors, put them in the bumper BEFORE installing the bumper.
2. do a temporary removal of the tailgate to tighten the bolts that are difficult to reach.
How many square spacers are needed to level out the bumper ?
Mine also arrived scratched up, gash on one of the hooks, the passenger side is a huge gap and not flush with the body compared to the light. Tried to realign but bolt holes do not line up or ability to set back farther. Disappointed as well with the large gap between the tailgate and bumper. No phone number to reach BodyArmor for support on these design flaws or bad batch of product
Can you do a video on hooking up lights.
2 hours is not accurate, I’m 1.5 hours in and the license plate lights not coming as shown in the video
I just bought this bumper and waiting for the weekend to install. I noticed the trailer plug almost fell out while you were installing your license plate. Is this a problem with this bumper that you didn't want to address or no?? To thick for the retainer clips maybe? There is nothing more annoying than seeing a problem that it appears the seller is trying to avoid talking about.
it doesn't fit perfect. A little disappointing!
some of the welds on that bumper you are installing look like crap.
Do you have pics of bumpers at this price that have great lokking welds?
Thanks for this video, just curious if anyone else has an issue with the wiring harness not long enough to fit on the new bumper?
Edit: for everyone asking it's Curt manufacturing 55384 wiring harness that fits.
Did you get an answer to this question?
@@90PlusCycling yes, but on other platforms. The wiring harness being too short is a thing. I just ordered a 20$ part from Amazon.
@@DAVIS-ec9wl What did you order?
@@rosstansey3928 same issue yesterday. Did you figure it out?
@DAVIS1891 what was the part if you remember please. I'm having the same issue.
Just a heads-up, on the license plate install. You can also use plastic mollies and the old, or new hardware can be used. Thank you!
Thanks for watching! -Zach
What about my dear sensors cuz the way you removed the bumper it removes all the wires for the sensors
Can you add 2-3 inches on the width on the back bumper?
Someone know where I can find the name of the pieces
What a load of shit. No video for the sensors. The slots for the sensors are too small. The holes need to be drilled out better. The trailer plug sticks out too far and the harness has to be pulled tight to make it plug into the outlet. No mention that I saw about BSM not working in the product description.At least it looks good and is durable...
I used this video to remove my bumper for some repair work.
We're happy it helped you out! -Zach
great job! and only one broken nail! :)
😁
Hey, sometimes it happens! I appreciate the compliment. Thanks for watching! -Merideth
Very informative video, much appreciated "liked" ... already subscribed.
Awesome, thank you for watching! -Zach
anyone happen to know how much this weighs? it seems really good for the price but just would like to know the weight of it for my 2013 tacoma
the weight of the box from fed ex said 110lbs when i got mine so id say 100
Where can I buy the bumpers for my Tacoma 2019?
On our website ExtremeTerrain.com! -Zach
Would you be able to reach those forward allen bolts if you take the tailgate off ?
It's honestly not worth the time. How she did it is the fastest way.
That’s what I did, I found it easier than tightening it with the wrench
would this bumper work if the truck has Blind Spot
No. I wish it does
@@lost_legend-4005, do you know how come it will not work with the BSM?
@@milesjohnson8271 BSM can't go through metal.
As of this time, there is only one bumper that works, and it’s very pricey
That looks sharp!
Thanks for watching! -Zach
These strong bumpers are DEADLY on both ends. ! I want one for my new Tacoma but don't forget all vehicles are designed to crumble for our safety !