How-to: Set up JOYSTICK GREMLIN for Star Citizen (and other games too)

Поділитися
Вставка
  • Опубліковано 4 лют 2025

КОМЕНТАРІ • 33

  • @LisaSimpsonLiberal
    @LisaSimpsonLiberal Рік тому +1

    After watching this I was able to set up a dock mode to change throttle input from peddles to stick input for landings / dockings. Much thanks

  • @manolismavrelis5854
    @manolismavrelis5854 Рік тому +4

    that was actually one of the best guides i came across so far ! thanks bro , keep them coming !! 👍

  • @W.Eric.Anderson
    @W.Eric.Anderson 3 місяці тому

    that was fantastic explaination...very clear for me...thanks for your work and time!

  • @stephenmadden9984
    @stephenmadden9984 Рік тому +1

    Looking at your flying shorts with the racing in star citizen it’s so smooth and responsive I like these

  • @NerdyStirFry
    @NerdyStirFry Рік тому +1

    I have been hoping for software like this. Thank you!

  • @CptWinning
    @CptWinning Рік тому +1

    😮 this is pretty amazing. It’s really indebth I like all the options that can be adjusted. Definitely going to look more into this gear

  • @Sisu_Snacks1917
    @Sisu_Snacks1917 Рік тому

    Great guide. Covers ~90% of the use cases for Joystick Gremlin in one guide. I am getting back into Elite Dangerous/Joystick Gremlin. ED has a 32 button limit per device, so almost required if you have any of the higher end throttles with >32 buttons.

  • @RedKing1337
    @RedKing1337 Рік тому +1

    This is amazing I really want to get to this level but definitely have to save up then build up over time. I’m using dual extreme 3D pros they do the job.
    I will definitely be revisiting this video again when I get to your level. Very helpful thank you

  • @StarFireG3
    @StarFireG3 Рік тому

    This looks promising. I'll try this on my T.16000 HOTAS. Please more of this content!

    • @GK_Squid
      @GK_Squid 10 місяців тому

      Did it work out for you? I picked up a Tflight one Hotas but it's not supported in SC.

    • @StarFireG3
      @StarFireG3 9 місяців тому +1

      @@GK_Squid It worked perfectly until I did something wrong and Joystick Gremlin stopped working. I still have to find out how to uninstall all components of JG and it's residues. If I succseed I set it up again.

  • @Batsboem1
    @Batsboem1 6 місяців тому

    I did some heavy research and chat gpt sais that you can also if you have an on/off latching switch and when you change state that it outputs a buttonpress

  • @Bolson24d
    @Bolson24d 5 місяців тому

    That was awesome, per the usual! How do you load the controls in Star Citizen? Can you make a quick video walking through those steps?

  • @hardcoreblub294
    @hardcoreblub294 8 місяців тому

    Great video! Helped me a lot!

  • @g10118
    @g10118 7 місяців тому

    I had gotten most of the way through configuring joystick gremlin to deal with some jittering deadzone on my left stick before I had the realization that this was not going to work since SC wouldn't know which device I wanted to use since the vjoy device was just a modified duplicate and both devices are still present in the control panel. Hidhide was the missing link, thank you!

  • @stormy_beard
    @stormy_beard 10 місяців тому

    10 months late on my question but in my hidhide there is a checkbox on the bottom to apply "inverse application cloak" i'm assuming you want checkmark active for those selected programs to see through hidhide, confirmation would be great!

  • @MrBlueGameReal571
    @MrBlueGameReal571 10 днів тому

    how do i get it to work on my mouse? im trying to bypass the option that won't allow you to bind your mouse in the f-14 dcs

  • @misapheonix
    @misapheonix 3 місяці тому

    As with your Thumb Stick remapping, is it possible to remap an 8 way hat as a traditional gamepad thumbstick, instead of mouse motion? I got an 8 way thumbstick attached to my throttle. Gremlin registers it as an axis so I can't just assign it as WASD movement. I got a gamepad that I can macro to it at least, but I'm inexperienced, any advice appreciated!

  • @scienz0220
    @scienz0220 10 місяців тому

    I'm trying to use temporary mode switch so that I can use the joystick thumb button for both VTOL and LANDING GEAR but I just can't figure out what is going wrong. I'm getting double inputs in star citizen when I press the thumb button only, but the modified key bind is successfully activating only LANDING GEAR as I intend it to. I am hard stuck here and cannot conceptually figure out what I have to change to make the modified button press ignore the vanilla keybind. If you have a moment to reply and clear up what I am doing wrong I would be forever grateful. Thanks for the video

  • @Corinzio
    @Corinzio Рік тому +1

    I cannot use the slider on my Virpil alpha as a "look behind" button in Star Citizen. I can't figure out how to get it to recognize it... all the other buttons I was able to configure correctly with Gremlin. Suggestions?

    • @UndeadParrot
      @UndeadParrot  Рік тому +2

      If I remember correctly, the slider was (at least for me) configured both as an axis and button in Virpil software for some reason.
      Since I wanted to use it as a button, I took the axis binding away in Virpil software and then it worked properly as a button.

    • @Corinzio
      @Corinzio Рік тому +1

      @@UndeadParrotthanks buddy! I solved by removing the slide from the VPC software

    • @Corinzio
      @Corinzio Рік тому

      @@UndeadParrot Hello dear! Do you think it is possible somehow to make star citizen recognize the pedal board pedal one for boost and the other for afterburn?

    • @danielsandradeful
      @danielsandradeful 4 місяці тому

      @UndeadParrot you are my last hope! I have my virpils desconfigured beyond repair.
      My ship is star citizen roles uncontrolled and I don’t know why. Between the Virpil software and and joystick gremlin I think I messed it all up. I can’t even play at this point.
      Can we do a stream to try and fix this? Or maybe share you Virpil joystick and cm throttle profile so I can upload it to my stick?

  • @Corinzio
    @Corinzio Рік тому

    Hello dear! Do you think it is possible somehow to make star citizen recognize the pedal board pedal one for boost and the other for afterburn?

    • @UndeadParrot
      @UndeadParrot  Рік тому

      Should be doable as long as joystick gremlin recognizes them as buttons / axes.

  • @JeremyTHolt
    @JeremyTHolt 10 місяців тому

    So do you use HIDHide to hide the controllers from Star Citizen and just let the game see the vJoy controllers?

  • @JohnSmith-xq1pz
    @JohnSmith-xq1pz Рік тому +5

    Wait I thought pilots didn't like Gremlins in the engine room 🤔

    • @tver
      @tver Рік тому +3

      You just have to remember not feeding your cockpit after midnight and you’ll be fine.

    • @JohnSmith-xq1pz
      @JohnSmith-xq1pz Рік тому

      @@tver 🤣🤣🤣

  • @condork464
    @condork464 3 місяці тому

    sorry, you lost me