Good video! I have the same model and dust bag got disconnected somehow and all the dust entered the motor. I realised it when motor started making wierd sound. Though I managed to open and clean everything, I was struggling to put them back. Should have watched your video before opening. Anyways I will use your video as a reference to try closing it back.
Great going very encouraging for environment , by refurbishing old vacum u have saved that much waste adding into environment. And when people inspired by your video do the same that 100x saving of environment. And in the process u are helping them save money.
Inspired by your video my vacuum ball bearing of the motor was gone got it replaced and I assembled it, and started using it. After some use I felt the motor was running rough. Could u please show how to disassemble and then assemble the motor of tornado trendy. Thanks for video u have already posted
Authorised service centre. I think it's better to buy a new vacuum cleaner than spending on a new motor. Because spare parts are difficult to get. Enquire in local electronics shops, sometimes it may be available
I’m using trendy steel model, I lost my hard rubber, which is used to connect to dust bag , now suction is working very minimally, please help me to get that rubber
Dust bag ki silai(stitching) kahi se fat gayi hogi, uss time pe dust motor casing me gaya hoga aur wahi dust bahar fek raha ho sakta h. Bina Dust cover dhakkan open rakh ke aap ghar ke bahar usko chalu kijiye. Andar fasa hua dust ko uda dega
can u give a wiring diagram.afte r opening the cleaner,i forgot to note down connectors plug in points.also it would be better,if u could give a slow demonstration of reassembly.
Dm me on Instagram id "the_passionate_dreamer", I'll send a snapshot of the wiring. Slow re assembly would've made the video lengthy, you can adjust the UA-cam playback speed and watch it in slow.
My trendy steel vacuum cleaner is suddenly stop working. It shows power supply on but it is not starting. What can be the cause of it , our machine is as good as new, as we had used it for 3-4 time in last 3 years since we purchased it. It has one more problem since we had purchased it was , it get heat up in 40-60 minutes of use. What can be the remedy to this problem.
Hi,Will make a video on that later. It's a spring based retracting mechanism, the switch disengages a normally locked lever that's how spring spins the drum
Hii i have the same vaccum. Just changed my motor but could you please tell the reason why my blower & suction power has reduced. Even when kept on full speed its suction & blower are very low. It was perfect till u changed my motor
@@MECHTOYSOFFICIAL Sorry i meant everything was perfectt till my motor was changed by the technician... Could you pls tell me the possible cause of why its suction & blower are not powerful as before??
Don't know the exact reason for your problem, it can be anything. Motor speeds may fall if voltage is lower than the requirement (220-240v). The new motor may not be of the same rated power as the original one(1300W), there may be gaps formed between its motor seat, or any of the seals may have air leaks which i already mentioned in my video. Is there any reduction in sound of your vacuum cleaner than earlier???
@@MECHTOYSOFFICIAL Yes it sounds different from what it was before replacing the motor... I got it changed from Eureka forbes service center itself... So i guess they must have replaced it with a 1300 watts motor
Check the amount of input power with the help of any electrician using a clamp meter. He'll tell you how much power your vacuum cleaner is consuming. With that info motor's wattage can be understood 😊
Give it a try, once i booked a service request. They said their service engineer will get in touch within 24hours, nobody called. And then they provided a contact number, nobody picked the call either. Now things might've changed. Try
I'm not from Eureka Forbes. Yes their service is very bad. Im also a frustrated customer who trust this brand once😂 no response over weeks,months, years
Good video! I have the same model and dust bag got disconnected somehow and all the dust entered the motor. I realised it when motor started making wierd sound. Though I managed to open and clean everything, I was struggling to put them back. Should have watched your video before opening. Anyways I will use your video as a reference to try closing it back.
Thank you 🤗❤️
Great going very encouraging for environment , by refurbishing old vacum u have saved that much waste adding into environment. And when people inspired by your video do the same that 100x saving of environment. And in the process u are helping them save money.
Inspired by your video my vacuum ball bearing of the motor was gone got it replaced and I assembled it, and started using it. After some use I felt the motor was running rough. Could u please show how to disassemble and then assemble the motor of tornado trendy. Thanks for video u have already posted
Excellent
Thank you 🤗 here's a more detailed video
ua-cam.com/video/cAtYracFUb4/v-deo.html
Any reassembling video for Forbes trendy
ua-cam.com/video/cAtYracFUb4/v-deo.html
Interesting video. Remember this design of vacuum cleaner. Here it was sold under an other brand and colour
Thanks Gerry. 🤗❤️
ua-cam.com/video/cAtYracFUb4/v-deo.html check this out
U r really good and patient
Thank you🤗
From where I can the motor for replacement please reply
Authorised service centre. I think it's better to buy a new vacuum cleaner than spending on a new motor. Because spare parts are difficult to get. Enquire in local electronics shops, sometimes it may be available
I’m using trendy steel model, I lost my hard rubber, which is used to connect to dust bag , now suction is working very minimally, please help me to get that rubber
You should contact the customer service, may be they'll be able to supply spares
Please make video for reaasmeble I am not able to put it back into place
I need ur whatsapp no
Help me please in reassembling it again sir
8547788746. I've network issues that's y unable to post new videos
@@MECHTOYSOFFICIAL I hv texted u brother help me
Bahi mera vacom back sy dust phaenk rha ha 3bags be repleac kir deyey ha kia waga ha
Dust bag ki silai(stitching) kahi se fat gayi hogi, uss time pe dust motor casing me gaya hoga aur wahi dust bahar fek raha ho sakta h. Bina Dust cover dhakkan open rakh ke aap ghar ke bahar usko chalu kijiye. Andar fasa hua dust ko uda dega
can u give a wiring diagram.afte r opening the cleaner,i forgot to note down connectors plug in points.also it would be better,if u could give a slow demonstration of reassembly.
Dm me on Instagram id "the_passionate_dreamer", I'll send a snapshot of the wiring. Slow re assembly would've made the video lengthy, you can adjust the UA-cam playback speed and watch it in slow.
@@MECHTOYSOFFICIAL thanks.awaiting for the snapshot.
Yes it would be helpful if u add a video of reassemble of this kind of vaccum cleaner
Okay i will
Sir my vaccum cleaner same model, it's working but not dust pull off
Check if you have proper voltage in your home, is the dust bag full?, Is there any leakage in suction hose/ seals that I've mentioned in my video
Good one, add texts in between the video to make it more impactful
😊♥️thank u
My trendy steel vacuum cleaner is suddenly stop working. It shows power supply on but it is not starting.
What can be the cause of it , our machine is as good as new, as we had used it for 3-4 time in last 3 years since we purchased it.
It has one more problem since we had purchased it was , it get heat up in 40-60 minutes of use. What can be the remedy to this problem.
There could be several reasons. Have u tried switching it on from other plug points in ur house?
How to fix the cable automatically winding itself without pressing any button
Hi,Will make a video on that later. It's a spring based retracting mechanism, the switch disengages a normally locked lever that's how spring spins the drum
@@MECHTOYSOFFICIAL I've opened the v cleaner now .. will try to fix 😀
What issue you're facing with the cable retractor?
Plz post link to buy the replacement wheel..one of them is broken and want to change that also
Cable is automatically getting pulled without pressing the button.
Hii i have the same vaccum. Just changed my motor but could you please tell the reason why my blower & suction power has reduced. Even when kept on full speed its suction & blower are very low. It was perfect till u changed my motor
I didn't change your motor 😳
@@MECHTOYSOFFICIAL Sorry i meant everything was perfectt till my motor was changed by the technician... Could you pls tell me the possible cause of why its suction & blower are not powerful as before??
Don't know the exact reason for your problem, it can be anything. Motor speeds may fall if voltage is lower than the requirement (220-240v). The new motor may not be of the same rated power as the original one(1300W), there may be gaps formed between its motor seat, or any of the seals may have air leaks which i already mentioned in my video. Is there any reduction in sound of your vacuum cleaner than earlier???
@@MECHTOYSOFFICIAL Yes it sounds different from what it was before replacing the motor... I got it changed from Eureka forbes service center itself... So i guess they must have replaced it with a 1300 watts motor
Check the amount of input power with the help of any electrician using a clamp meter. He'll tell you how much power your vacuum cleaner is consuming. With that info motor's wattage can be understood 😊
shall I get the phone number of our nearest vacuum cleaner repair shops Iive in Pathanamthitta
Give it a try, once i booked a service request. They said their service engineer will get in touch within 24hours, nobody called. And then they provided a contact number, nobody picked the call either. Now things might've changed. Try
Haloo sir
Hi
I think you don't have proper service center
I'm not from Eureka Forbes. Yes their service is very bad. Im also a frustrated customer who trust this brand once😂 no response over weeks,months, years