KTM SX 65 new cylinder and piston.

Поділитися
Вставка
  • Опубліковано 13 гру 2019
  • Change of cylinder and piston after damage.
    . . . for more interesting videos click ,, HERE "
    / @paulxchannel
  • Авто та транспорт

КОМЕНТАРІ • 42

  • @evaork3746
    @evaork3746 3 роки тому +1

    Nice rebuild man👍👍👍

  • @grantfuller2016
    @grantfuller2016 4 роки тому +3

    That’s why they always teach you to put the clip gaps to the top or the bottom - never sideways. ( that said , never seen one fail like that )

  • @2strokemxclassics
    @2strokemxclassics 3 роки тому +1

    Good vid m8 I'm doing one of these tommorow that's seized👍

  • @jackstrempel5135
    @jackstrempel5135 4 роки тому +9

    when u hit the rist pin out put your hand on the back of the pistion when u dont it putting pressure on the crankshaft and rod

    • @chrisstephens6673
      @chrisstephens6673 4 роки тому +1

      @NickoLps a little ungenerous aren't we?

    • @phillsmith5100
      @phillsmith5100 3 роки тому +1

      He’s right though. And for keyboard warrior you seemed the more violent, but hey that’s just my opinion 🤷🏼

    • @jackstrempel5135
      @jackstrempel5135 3 роки тому

      Who me

    • @phillsmith5100
      @phillsmith5100 3 роки тому

      jack strempel I was on about Nickolps. I was agreeing with u.

    • @brane1872
      @brane1872 3 роки тому

      Oh no, putting pressure on parts that are made to be molested at 10000+rpm

  • @JMATUS24
    @JMATUS24 4 роки тому +1

    How did that vertex piston hold up for you. Thinking about getting that exact one. Great video, thanks.

  • @vanluomvlogs
    @vanluomvlogs 4 роки тому +1

    Bạn làm máy Nhìn đẹp ok

  • @garygruber1452
    @garygruber1452 Рік тому

    It appears as if you didn't lube the piston before assembly. Is there a reason for that?

  • @cardwellbrosdirtbikediy1249
    @cardwellbrosdirtbikediy1249 3 роки тому

    Did he torque anything down?

  • @benji9458
    @benji9458 4 роки тому +4

    How many hours did this piston drive

  • @arturomedina5746
    @arturomedina5746 2 роки тому

    What year ktm 65?

  • @martynotete
    @martynotete Рік тому

    You made some mistakes. The gaskets under the cylinder are measured with a special tool, that's the first thing. Secondly, when tightening the power valve you MUST hold it with a 6mm spanner, otherwise it cracks... At the beginning it doesn't show, but after 15-20 moto hours it cracks in half. But all in all a good job :)

  • @lancien8751
    @lancien8751 3 роки тому

    Price of lot ? I speak french excuse mi for the error

  • @evaork3746
    @evaork3746 3 роки тому +1

    This is a cilinder that dont need a powervalve... but ktm wants to... becouse it looks good😂😂

  • @charliesparks7789
    @charliesparks7789 4 роки тому +1

    Was new cylinder needed? Couldn’t you have bored out the cylinder and got a larger piston?

    • @PaulXchannel
      @PaulXchannel  4 роки тому +3

      Very damaged.
      0.5 MM groove on cylinder.

    • @glennmerriman8382
      @glennmerriman8382 4 роки тому +4

      Cylinder is plated aluminium, no iron liner, so cannot be bored out as such. Though it can be repaired & re plated

    • @motogpmotogp7281
      @motogpmotogp7281 Місяць тому

      Squish plz? ​@@PaulXchannel

  • @michaelwarlow4398
    @michaelwarlow4398 3 роки тому +2

    Slow ! But nice and rough 😜

  • @mwmxcnc
    @mwmxcnc 4 роки тому +1

    What the heck happened to the head? Looks like someone took a pipe wrench to it. How did the cylinder works cylinder hold up? I’ve never tried one.

  • @Hi-sp2nw
    @Hi-sp2nw 3 роки тому +1

    What mm was the piston

    • @PaulXchannel
      @PaulXchannel  3 роки тому +3

      Everything is in the video.
      44.96

    • @Hi-sp2nw
      @Hi-sp2nw 3 роки тому +1

      Paul X thank you

  • @jcook1077
    @jcook1077 2 роки тому

    You need to invest in a torgue wrench

  • @joelwrx0407
    @joelwrx0407 3 роки тому

    Ummm, Do you own a torque wrench?

    • @PaulXchannel
      @PaulXchannel  3 роки тому +1

      I've heard about this device before :)

  • @jdel1538
    @jdel1538 4 роки тому +2

    1:06 what is this you are taking off?

    • @dariusmickunas
      @dariusmickunas 3 роки тому +1

      Looks like diaphragm of power valve actuator

  • @boru-cnc
    @boru-cnc 4 роки тому +4

    That's not your working style! Normally you should turn the piston to smaller diameter and then put a new little aluminium bush into the cylinder! 😂 That's the way you fix 99% parts! 😂

    • @PaulXchannel
      @PaulXchannel  4 роки тому +1

      I'm glad he's still visiting my channel.
      Thanks.

    • @boru-cnc
      @boru-cnc 4 роки тому +1

      @@PaulXchannel no problem I love to comment your chanel, youre a good machinist but some things can be improved ! ;)

  • @user-de1cf6wr6v
    @user-de1cf6wr6v 4 роки тому +1

    Знатно уработан горшок с поршем