Hey Jason! Thanks for being so willing to help others! You're always straight forward and I have adopted 80CRV2 is the minimum steel I will use from now on. Your contributions have a wide spread positive impact on the industry.
There is so much to heat treating and then tempering the steel. It’s magic. To harden but then relax it just enough to take the brittleness out of it. This is one of the best useful videos that I’ve seen in a long time. Pops knife supply is the best.
Jason your an Excellent Master Blade smith Rock on Brother. I’m an intermediate blade maker no where the level that you are! I was a Paramedic for 35 yrs in the inter-city. When I retired I was always a knife collector, but I said to myself “What Hell am I going to do with myself for 12hrs a day” Now mine you I was in a horrible ambulance in “98” and it took them 20 min’s to cut me out broken back 3 major back surgeries last on the fused my entire lumbar spine in pain 24/7 but I refuse to lay down and feel sorry for myself! Served in both US Marine Corps then recruited into the US Army because I had special skills. So as a knife maker I’m I learned from U-Tube ie., John Kaiser vids. Great Vid’s!!! Question I normalize the blade one time and then let cool by the Air. Then I heat tx the 80crv2 in my oven @ 1525 degrees hold for 15minutes what else needs to be done?
I knew Mr Knight would be stopping by. Just wanted to say a big thanks to both of you all. Because of y’all I just fired up my first forge the other day! Rock on!
"That is why their knives were breaking because they didn't know what they were doing."... OOOOhhh Snaaaap! Really dig Jasons explanations and him sharing his knowledge in the first place.
You 2 should do a knife series together..bladesmithing for the common man... Kinds like forged in fire... Take junk and make it into a working blade or axe.. Just a thought
Hey Dave, I love your videos. Would you happen to have any ideas for meals to cook over a fire. With a bush pot? Looking forward to hearing from you. - Glenn from Eye On Silver.
From one Grunt to another. Dam Dave, was sitting here watching tut our last upload. Your getting petty long in the tooth. Lol love your content take care brother. I WAS WRONG!!! Just looked yuu up on wickipedea thought you where a Grunt says you where a scrub MP!!!!!! No wonder why you look so long in the tooth bad carma catching up with you. Lol All banter aside take care brother.
Hey Jason! Thanks for being so willing to help others! You're always straight forward and I have adopted 80CRV2 is the minimum steel I will use from now on. Your contributions have a wide spread positive impact on the industry.
There is so much to heat treating and then tempering the steel. It’s magic. To harden but then relax it just enough to take the brittleness out of it. This is one of the best useful videos that I’ve seen in a long time. Pops knife supply is the best.
Jason your an Excellent Master Blade smith Rock on Brother. I’m an intermediate blade maker no where the level that you are! I was a Paramedic for 35 yrs in the inter-city. When I retired I was always a knife collector, but I said to myself “What Hell am I going to do with myself for 12hrs a day”
Now mine you I was in a horrible ambulance in “98” and it took them 20 min’s to cut me out broken back 3 major back surgeries last on the fused my entire lumbar spine in pain 24/7 but I refuse to lay down and feel sorry for myself! Served in both US Marine Corps then recruited into the US Army because I had special skills. So as a knife maker I’m I learned from U-Tube ie., John Kaiser vids.
Great Vid’s!!! Question I normalize the blade one time and then let cool by the Air. Then I heat tx the 80crv2 in my oven @ 1525 degrees hold for 15minutes what else needs to be done?
I knew Mr Knight would be stopping by. Just wanted to say a big thanks to both of you all. Because of y’all I just fired up my first forge the other day! Rock on!
What’s the deal with not showing or mentioning it’s necessary to temper after quench on forged in fire? Drives me crazy.
Very informative and educational. Thank you very much
So awesome to see you guys together. Very interesting video too. Thanks for sharing!
Great video and a way for a novice to get introduced into quite a heavy fundamental.
I’m looking forward to more videos in this series. Thanks Dave
Kingsport,TN- wow ! I used to live in Mt. Carmel,right beside it. Definitely checking Mr. Knight out the next time I go back home !!! (Go Vols) 👍
"That is why their knives were breaking because they didn't know what they were doing."... OOOOhhh Snaaaap! Really dig Jasons explanations and him sharing his knowledge in the first place.
TheAnonymousSword they were also making knives in a couple of hours
The "magic" that separates the amateurs from the pros. No doubt, Jason knows his business. Glad you guys got to share together.
Very interesting! Lots of knowledge and experience shared there!!! Thank you to you both!!! Excellent stuff! Very best wishes 👍🏽👍🏽😎
Awesome! I’ve been thinking for a long while about blacksmithing and making knifes.
Ayy im re watching Dual Survival its a great show Dave good to have you here sharing this stuff with us
I have that heat treat oven, issue is it takes 1 hour to heat up!
Jason Knight is a real nice and stand up guy, his wife is nicer. Met them at a camping trip last October. Also his knives are freaking amazing
Jason maybe be a trip to PORTUGAL to see how we heat the still.
Come to LISBON.
Very interesting. Thanks for sharing!
Very interesting. Thank you for sharing!! Take care of yourself David, and stay safe friend.🇺🇸👀
Tracy Plemmons that’s what I was going to say. You beat me to it 😊
You 2 should do a knife series together..bladesmithing for the common man...
Kinds like forged in fire...
Take junk and make it into a working blade or axe..
Just a thought
Yes! And I'd love to see some charcoal forge work
Soooooo who would win in a forge fight jason knight,david baker,ben abbot or j neilson? :P
Hahahahaha I too have often wondered why you always see small knives on those zombie shows....#morehawks!
Hey Dave, I love your videos. Would you happen to have any ideas for meals to cook over a fire. With a bush pot? Looking forward to hearing from you. - Glenn from Eye On Silver.
that was awesome!
Jason Knight. A great partner to do a knife video with.
Very cool. Skillet
I would follow this guys work, but I dont do Instagram or Facebook. Please create a youtube channel and put it there. I will sub easy.
The 4 earth elements used
Earth (Iron) to forge
Fire for heat
Air for fuel
Water to quench
fifteen hundred degrees what ?Fahrenheit, centigrade, kelven, arc, sugar lumps ???
F
What temps for O1 tool steel?
Cool interesting video
Cool to know he forged at Middleton place. That's a historical site outside of Charleston just down the road from where i live
Hey Dave, did you hear Mors Kochanski died this morning?
Yes very sad news
Guessing died of old age since he's close to 80???
Why people no want magnetic knife?
That fella looks familiar!
metal and wood...know your tools and get dirty learnin'
Your hair!😮
From one Grunt to another.
Dam Dave, was sitting here watching tut our last upload.
Your getting petty long in the tooth.
Lol love your content take care brother.
I WAS WRONG!!!
Just looked yuu up on wickipedea thought you where a Grunt says you where a scrub MP!!!!!! No wonder why you look so long in the tooth bad carma catching up with you. Lol
All banter aside take care brother.
Hey you cut your hair looks hella nice that long hair made you look hella old haha