Amazing work! BTW, you could use a wire brush to clean your metal first before welding.. That way it's not as hard to strike for tacking, looks cleaner and is stronger bonding :)
Am I the only one who noticed how gangster this dude is? All this done in some pink flip flops, keeping it 100%, straight genius. Helped me with a quad I'm working on
🔸🔸NEED TO CHANGE 🔸🔸 1) ESC position 2) use chain tensioner between motor to middle shaft 3) use more broad tyres 4) use slight gear reduction which helps in initial pickup 5) use broad chains
Yes, and to not kill yourself, there needs to be a screw holding the ends of the slit in where the wheel and rear rings are held... because an unclosed slit could just bend and the gap widen. Then you loose a wheel at 80 km/h... not good.
I have seen a lots of diy e bike videos but none of them could reach such high speed on such a low powered motor and also I liked the ranged that you mentioned in the description Is it real!!!! I'm totally surprised Nice work man. ... Keep working you will get 500k subscribers absolutely 💯 💪 Also your description was great 👍
shows that its fake if its too good to be true it probably isn't. i will only believe him if he compares it with bike speedo meter where biker is riding the bike along with him and also shows his spedo meter
that turned out great, well done you 👍 a couple of suggestions if you don’t mind my saying, first change the brake levers for all metal ones asap l had those plastic ones on my bike and they broke causing me to have an accident. also, if you use a bmx top loading stem you can fit motorcycle handle bars on my bike l fitted braced motocross bars all the best wishes 🙏🏻
I just noticed that the fork he used is a standard threaded suspension. I have been looking for such a fork for a long time. Maybe you can suggest where to buy something like that or is there really nothing like that in the Philippines?
Everything was going great....until blue!! Baby blue!!! Why bro??!! Don't get me wrong, the project is cool. But still.... Also, 1. you might want to install a tensioner between the motor and the mid-hub. That wobble looked veeeeeery bad. Best case, the chain just snaps, worst case it jams up and you go for a superman ride. 2. The controller is in a bad position. Low ride height for that speed is bad. Please just change the position. Maybe at the back? I'm sure you can think of that. 3. Breaking bro. I know the motor slows itself, but it's better to have better breaking than just those thin discs. I mean, for 80 Kmph thise would be terrible. I did not see if those breaks you had came installed with a battery cut-off. Great work bro! Doing these yourself is awesome! Still, baby blue urgh...atleast all black or blood red would be great!
Legal demais boy parabéns , agora li dou uma dica o controlador de potencia que ficou em baixo do motor fica exposto a pancadas em quebra molas , o resto ficou bom demais , esse teu motor da quantos rpm de rotação ???
@@homemadecreativee Hey listen, I stay in Mumbai and I have a fat bike that needs to be converted like this, can you please help me or atleast give me contact details in mumbai for any mechanic who can help me out.
Your Idea is great. I give you 10 out of 10. Excellently. But in practical use it is quite risky. Listen to me carefully. Bike frames are made of stainless steel but you made your with iron and Bikes are tested in R&D laboratory. With time your ebike will rust which will cause you metal fatique in joints.and with rusted frame it will break. Trust me I am also a survivor of ebike frame crash at 25km/hr since my brakes failed and in impact my rusted frame broke. Luckly I survived with minor injury. Second is high speed impact at 80km if deadly fatal and chances of survival is zero. Third is disk brake used is for bicycle not of bike. At high speed braking chances of failure is most probably high. In such senario rider will not survive. For experiment, testing you are right. But i recommend you to add speed limit at 35km/h for safety reasons. Indian roads have very high trafic. And some riders dont obey rule. Accidents happens not always for your fault. It can cause due to other drivers also. Overall excellent idea.
Amazing work! BTW, you could use a wire brush to clean your metal first before welding.. That way it's not as hard to strike for tacking, looks cleaner and is stronger bonding :)
0 to 60kmph within 12 seconds is crazy fast for an homemade ebike! Congrats on making such an thing.
Kya talent he ish ladke me
Yes bro my eyes come out
🤣🤣🤣🤣
🎉
@@ranjitsinghaujla7426and my heart come out . its heart bursting talent
भाई मजबूत जिगर है जो साइकल को 80km तक दौड़ा दिया,ओर साथ ही साथ किस्मत के भी धनी हो जो यह बिना रिम टूटे दौड़ भी गयी?💐
Am I the only one who noticed how gangster this dude is? All this done in some pink flip flops, keeping it 100%, straight genius. Helped me with a quad I'm working on
I’m gonna be doing the same for a tricycle
How much km in single charge? And charging time?
And.. Will it's speed can b controlled through accelerater?
🔸🔸NEED TO CHANGE 🔸🔸
1) ESC position
2) use chain tensioner between motor to middle shaft
3) use more broad tyres
4) use slight gear reduction which helps in initial pickup
5) use broad chains
Yes, and to not kill yourself, there needs to be a screw holding the ends of the slit in where the wheel and rear rings are held... because an unclosed slit could just bend and the gap widen. Then you loose a wheel at 80 km/h... not good.
@@JonathanVaucher 😂😂
Vauchero
Khod banale or ye sab step use kar liyo 😂
Add a jet engine and, wings and a parachute as well. And cup holders don't forget the cup holders.
I have seen a lots of diy e bike videos but none of them could reach such high speed on such a low powered motor and also I liked the ranged that you mentioned in the description
Is it real!!!! I'm totally surprised
Nice work man. ... Keep working you will get 500k subscribers absolutely 💯 💪
Also your description was great 👍
Yes, you are right, Everything is Real Speed, Range and Working Breaks But It Is Also Dangerous, and It is Only For Experiment Purpose
@@homemadecreativee thanks for quick reply
Sir by adding more powered motor can we increase the speed of bike
@@digambartandale8253 I don't know about the speed but the torque would be increased
Bhai aapse kaise milu ya baat kre
you are ecofriendly. excellent installation. speed pickup very good.
Aaj tak ka sabse badia video ..jismein baad kum aur result exclence
13:00 The sound of a bicycle as it burns up and goes poof into a cloud of smoke!
Wah bete mauj kardi.... Bade heavy driver nikle tum to.......
I'm impressed that he's doing 80km/h with 900W where some other videos show the same speed with 6kW. Shows that you don't need all the power.
Because of there is no weight compared to previous
Bro not only speed, torque is also important, that why they use 6 kw motor with excellent battery management
shows that its fake if its too good to be true it probably isn't. i will only believe him if he compares it with bike speedo meter where biker is riding the bike along with him and also shows his spedo meter
Un po' come gli elettrodomestici che vanno da 900 a 1500 WT
Good,Very good meri talash puri hui.
Thanks
Great project..👍
Is it gorgeous and I would like to ride one time how much for make it like this
Cool Bike ! Good Job
Aaaaaaaaaaaaaaaaaaaaaaaaa
Чересчур заморочился,но летает огонь 🔥
that turned out great, well done you 👍
a couple of suggestions if you don’t mind my saying, first change the brake levers for all metal ones asap
l had those plastic ones on my bike and they broke causing me to have an accident.
also, if you use a bmx top loading stem you can fit motorcycle handle bars
on my bike l fitted braced motocross bars
all the best wishes 🙏🏻
Thanks for Advice 😊
@@homemadecreativee you’re very welcome sir 👍
Super brother good work 👍👍
Thank you so much 👍
Que inglés tan madreado
वह मेरे सेर केया बात मोज कारदी बेटा
देस की।शान हो लगे रहो ❤❤❤❤❤🎉🎉🎉🎉🎉🎉🎉🎉🎉
Award winning project. Great 👍👍🤗🤗
If only I had such a workshop
I am from Bangladesh, I like your idea
Kitne mehnat se banaya thanks Bhai 👍
Verry good idea bro, my inspiration 👍
Thanks
I have watched many of your videos you make it look easy because you have such talent.
Thank you so much 😀
Very good brother
Would like to suggest since this is high speed use a thicker Tyre on rear and instead chain drive try a v belt with auto tensioner
Thanks
Welcome
Good creative and hardworking.
Plz help others
Bhai tum पैडल के पास जो लगाय हो बेरिंग वाला उसका नाम बताओ
Great Job 👍
This is good project useful for everyone..
Because of lack of workers only. many of the farmers geting out from agriculture bro. So please help the farmers with your great brain bro
True bro🙏
Well said🙏
Price kiti
Check Description
👍 kitne din mein ready Hui bhai
This is the future of cycle and cycling 😎😎👍👍👍👍👍
भैया आपका कांटेक्ट नंबर तो बताओ यार हमें भी बनवाने बाइक
Wow, that’s wonderful! I so want to do that to my old trek.
It is definately made in india by an indian ❤❤hats off brother
Great video & ingenuity.
How much does it cost you to build
Veo que la cadena no esta bien tensada. Podria tener problemas de calentamiento y trabarse?
That's awesome where did you get all your components from?
check Description
Nice n innovative technology......All d best.....Pls tell us d total cost for this project.... Thank u Sir
Really love this 😍 ,
Great Hard Work 👍
I just noticed that the fork he used is a standard threaded suspension. I have been looking for such a fork for a long time. Maybe you can suggest where to buy something like that or is there really nothing like that in the Philippines?
Absolutely
Amazing
ماشا اللہ بہت عمدہ ہے بھائی
Shukriya
Impossible talent bro......but 1 question ...can I buy it ? If I buy price ????
hi
@@VikashKumar-cw8qq hellow
Is that possible to apply sudden break in it
Everything was going great....until blue!! Baby blue!!! Why bro??!! Don't get me wrong, the project is cool. But still....
Also,
1. you might want to install a tensioner between the motor and the mid-hub. That wobble looked veeeeeery bad. Best case, the chain just snaps, worst case it jams up and you go for a superman ride.
2. The controller is in a bad position.
Low ride height for that speed is bad. Please just change the position. Maybe at the back? I'm sure you can think of that.
3. Breaking bro. I know the motor slows itself, but it's better to have better breaking than just those thin discs. I mean, for 80 Kmph thise would be terrible. I did not see if those breaks you had came installed with a battery cut-off.
Great work bro! Doing these yourself is awesome!
Still, baby blue urgh...atleast all black or blood red would be great!
Hi Bro, Thanks
I Agree All of the point that you put, and next time I will try to do my best
@@homemadecreativee All the best!
बहुत ही सुंदर इसका कोई जवाब नही । क्या आप बनाकर बेचते भी है ।
Good technology vichels used good tools drilling machines good people used good technology thanks brothers 🧐🚴♀️🚴♂️👌
Too Good, keep it up, all the best.
Genius brooo
I am still not convinced that you touch 80 km/ph .
BUT yhea hats off to your hard work
Super bro 🤜
Very🌹👍 good🌞👍 God bless you🙏
Whether this garage is located, how much it costs. If we are interested can you modify the bicycle.
grazie per avermi bruciato gli occhi con la saldatura...
Super Talent bro
Omg wow amazing work 🇮🇪 watching from Ireland ❣️🤘
Thanks
Super speed. This is like a bike
With this 48 volt 900 watt motor can i use 48volt 26-30 amp battery
Yes
Muy bien logrado, buenísimo 👍
Bhai kaha se ho
Please let me know what motor are you using How many bolt
Nice
Thanks
khatar cycle ko motor cycle bana diya😯👏👏👏👏😃
I am gonna ride this cycle in my dream
My also
Me too
Wounderful... who needs super bikes now.
Are you a genius brother, 81 km /h then you really run in?...
Thanks
Scarry fast
Waah bhai maza aa gaya
Kya speed hai
Legal demais boy parabéns , agora li dou uma dica o controlador de potencia que ficou em baixo do motor fica exposto a pancadas em quebra molas , o resto ficou bom demais , esse teu motor da quantos rpm de rotação ???
3000 Rpm
@@homemadecreativee Hey listen, I stay in Mumbai and I have a fat bike that needs to be converted like this, can you please help me or atleast give me contact details in mumbai for any mechanic who can help me out.
@@pratiktrivedi5800 I think I can help you. Please reply what specification you need
Jo kamal ki bike aapne banai wo videshi 3 kw ki motor se bana pate hai very good brother
i want to know that whether we can control speed or not
Ya motor bike may bi install ho sakti ha
Amazing bicycle
#BREAKINGNEWS#.. BOT ACHAY. CARRY ON , IT,S A GOOD JOB. I LIKE YOU VERY MUCH.#BREAKINGNEWS#..
The price of this cycle
Great work i have learn very things from your videos
Welcome
Bro!!!!! Please tell me the whole cost of building this I think upto 50,000₹?
Nice video plz reply me how you this speed on this motor
Exelente ❤️
Hi...What battery 🔋 have you used in this project.....?
Check description
@@homemadecreativee thanks 👍
Non hub bldc 900 watt= 80 kph, it's fast enough.
Usually bldc motor 1000w ( hub ) is only max 60 kph in the ebike market
Is not 900w, do the math. He is using a 48v 50A controller. 48x50= 2400w and he have a big battery that can deliver the 50 amps to the controller.
Your Idea is great. I give you 10 out of 10. Excellently. But in practical use it is quite risky. Listen to me carefully. Bike frames are made of stainless steel but you made your with iron and Bikes are tested in R&D laboratory. With time your ebike will rust which will cause you metal fatique in joints.and with rusted frame it will break. Trust me I am also a survivor of ebike frame crash at 25km/hr since my brakes failed and in impact my rusted frame broke. Luckly I survived with minor injury. Second is high speed impact at 80km if deadly fatal and chances of survival is zero. Third is disk brake used is for bicycle not of bike. At high speed braking chances of failure is most probably high. In such senario rider will not survive.
For experiment, testing you are right. But i recommend you to add speed limit at 35km/h for safety reasons. Indian roads have very high trafic. And some riders dont obey rule. Accidents happens not always for your fault. It can cause due to other drivers also. Overall excellent idea.
True, and I will keep that in mind
12:13 I see his face
At that time I am Riding that Bicycle and That U See are My Freind
Wow very nice 👍 very very good 👌 thank you my dear friend ❤️ for sharing 💚🌻💞💚
Amazing!
good gearing - a sweet spot between power and speed
Really nice I want the same...
Remember when r
@ 5:26 mins: The pliers falling off the workstation in slow motion was epic and the centre of the entire video. Did someone notice that!
Real engineering
गजब का दीमाग हें आपका ❤❤❤
𝙊 𝙗𝙝𝙖𝙞 𝘼𝙖𝙥𝙣𝙚 𝙮𝙚 𝙠𝙮𝙖 𝙗𝙖𝙣𝙖𝙮𝙖
𝙎𝙖𝙡𝙖𝙢 𝙝𝙖𝙞 𝙖𝙖𝙥𝙠𝙤 👨🔧
Sir in this bike which battery's is used
Tyre shuold wider, risk of slip good job
Very nice sr good for your help 💯 thanks
Use car alternator to make E.bicycle
How a breking system and riding range
Check Description
I want this brother, price how much
99 lakh
@@trailtest7105 what???
Very very nice video bahut khoob 👍👌🌹🇮🇳
Shukriya