Please comment your opinion on this video and don't forget to like , subscribe , share & press the bell button if you enjoy the content . thanks for watching .
Oh man those drilling operations. Wouldn't it have been much better to pre-drill and then use something like a boring bar? Or an endmill? Aren't drills kind of rough for this sort of thing?
Nu o să fie folositoare! Materialul este foarte moale. Tratamentul se face în baie de ulei. Materialul trebuie să fie dur. Se decălește înainte de prelucrare, apoi după prelucrare se face revenirea termic.
To ma być narzynka? Ona nie natnie takiego gwintu jak trzeba. Dlaczego? Spróbuj wkręcić trzpieniowy sprawdzian gwintu w pierścieniowy sprawdzian gwintu (np M8), to się przekonasz.
Not worth the efforts for standard sizes. Regarding the quality: I bet he *has* good quality standard sizes and build M10x1,5 to compare his piece with what is in his set - seems a valid approach to me.
Oh man those drilling operations. Wouldn't it have been much better to pre-drill and then use something like a boring bar? Or an endmill? Aren't drills kind of rough for this sort of thing?
Exactly, I would have used a reamer to finish those holes.
Like the use of a circlip as a stop !
Quenching in gramma’s candy dish, love it 😝
Good idea to help yourself in a pinch. If you want to split hairs the tolerance on a tap and die is slightly different but can see it being helpful.
Nice video it gives me inspiration for a trapezium die
Thanks
Nicee... I saw first time making this one type of die🙂
Its very very good
excelent... what steel is used?
Me gustó mucho ....te felicito !
sehr schon perfect vielen dank fur tecknik du gut machen 🌹🌹🌹🌹🌹👌👌👌👌👌👌
Spannend 😍💚
Excellent😍 amazing engineering👌
Case hardened ????
Welch ein Aufwand, für ein Werkzeug das nur zum anschauen taugt.
1:20 geile Idee,danke😊
Quality dies are made of high speed steel. This one is not and will quickly dull.
You can just harden it yourself and oil quench if it’s just a punch and will last long enough and just be replaced when needed.
Необходимо её ещё заточить шлифовальной головкой по отверстиям
Gloves near a spinning drill ... no thank you.
Agree.
Nu o să fie folositoare! Materialul este foarte moale. Tratamentul se face în baie de ulei. Materialul trebuie să fie dur. Se decălește înainte de prelucrare, apoi după prelucrare se face revenirea termic.
ОН НЕ МОЖЕТ РЕЗАТЬ РЕЗЬБУ , НАДО ЕЩЁ ЗАТЫЛОВКУ ДЕЛАТЬ НА ЗАХОДЕ
Lucrarea e "desăvârșită" !! Prin urmare la Obor în piață, o astfel de Filieră, costă 10-15 lei (2-3 euro) !!! 😮😮😊😊😂😂
To ma być narzynka? Ona nie natnie takiego gwintu jak trzeba. Dlaczego? Spróbuj wkręcić trzpieniowy sprawdzian gwintu w pierścieniowy sprawdzian gwintu (np M8), to się przekonasz.
What kind of steel?
water hardening.
Would be interested also - chips look not like mild steel...
कौन सा यहलोहा है नाम बताएं
That’s pretty cool 👍
Esto lo puede hacer cualquier persona,quien no tiene un torno en su casa y un soplete???cuántas chorradas!!!!!!!!!!
Is this hard enufgh
❤❤❤❤❤
Mentione the measurement in the subtitle...
Ofeishhhhhh
Do you realise how cheap these are to buy .
Think out of the box: With what you learned you can create rare thread cutting tools (threads with low pitch or even multi-thread tools).
Dat kan nooit werken, de draad heeft geen vrijloop en zal meteen gaan vreten.
Why invent the wheel? These dies are very cheap and the "technique" is not simple at all.
Have you seen how large farms are in Australia. Hours to the nearest hardware store.
WHY????
Not worth the effort, and probably not as good as one made by a reasonable quality manufacturer
Not worth the efforts for standard sizes. Regarding the quality: I bet he *has* good quality standard sizes and build M10x1,5 to compare his piece with what is in his set - seems a valid approach to me.
Says a person who has probably never made anything..ever
@@mooreevairfo sure.
Stop being so American
Read all the comments. This is a good project to hone your lathe skills. Thanks for the video, really enjoyed.