I wonder what can be the best way to tighten a cable in a large hall/venue (indoor) without attaching to walls. I was thinking of heavy crank stands, or is there a better way?
huh i don't got any idea how to mount without some infastructure... maybe you can use some heavy crank stand, but there is not small force my friend, i tighten rope as i can here but few runs and camera was almost in the grass, because rope is stretched in a few runs, so i must tighten it every few times.
Im planning on building one of these for using indoors as well. Let me know if you come up with a good way to do it. I'm thinking wooden stands with weight added to them would be sturdy enough.
Hi, awesome work and video. I would like to ask you: in a part of your video you speak about vibrations that your system has at low speed, but I can’t understand what you say about it. What you think is the cause? Too high kv? Motor type? Anything else? If you should answer if should be great for me! Thank you a lot! Awesome project and video.
it's problem in motor, i didn't try yet but i think brushed motor will work better, because it got much more torque at low rpm, brushless motor somekind loose steps if we overload it into low rpm so it make vibrations, like car engine... But with brushed power there coud be problem on high speed, lot of consumption, heating... Perfect choose will be some servo motor but they'r very expencive
@@cristianosox the best solution will be brushless motor and a transmittion with two or 3 gear, and servo for shifting them, i thinking in that way, but project stuck on that point, because barley filming outdoor so only use 1-2 times per year.
Hy actually it's not for sale, and got no time to make another, also that one isn't finished yet motor stil vibrating must to solve that with some transmission or something....
Hi TinC, thank you for sharing this cool project. I am willing to built a same device like yours. Today I started with buying a 6 channel remote + reveiver and right now I am looking for a 3 axes gimbal. Could you make a short list of the electronic devices you used please. Maybe direct into the video description not only in the answers of some comments. I mean it is alright to read them all cause there aren't so much but if the useful information were right under the video it would be perfect. Unfortunately I didn't get all of the words you said cause your music is so "loud" even in your speaking parts. Thank you for your effort filming all the steps you did and sharing them with us. Great job. Greetings
hy, thanks, i edit the description, if there something else just ask, about motor i can't tell you wich is perfect, because if you want to go fast there was problem in slow movement, and if you want smoot slow movement, the end speed wasn't fast, there will be perfect if you make some quick realese coupling for motor so you can change the motor depend on what result you want heave.
I did some search myself. Just to be clear if I don't have/want a video transmitting system I won't need an LC filter and step up..., will I? In that case I just need: - aluminium rig and the other mechanical hardware parts - HobbyKing X-Car 21.5 Turn Sensored Brushless Motor (1489Kv) [--> it would be better if the motor has < 1000 kV] hobbyking.com/en_us/hobbyking-x-car-21-5-turn-sensored-brushless-motor-1489kv.html - Hobbyking X-CAR 80A Brushless controller (sensored) hobbyking.com/en_us/hobbyking-x-car-80a-brushless-esc-sensored-sensorless.html - 3 axes gimbal - Turnigy nano-tech 5800mah 2S2P 30~60C Hardcase Lipo Pack (ROAR APPROVED) hobbyking.com/en_us/turnigy-nano-tech-5800mah-2s2p-30-60c-hardcase-lipo-pack-roar-approved.html - FrSky V8R4-II 2.4Ghz 4CH Receiver [--> depends on your remote] hobbyking.com/en_us/frsky-v8r4-ii-2-4ghz-4ch-receiver.html
All true, but you don't need exactly this parts, i choose it, because i got it from old pproject, battery i used from rc car, receiver you got by the transmitter you buy, there are thousnd of different reaceiver and all got the sam function, ESC (speed contoler) you must bought depend of motor choose, but if you take 80A there will be enough power, maybe look for some outrunner motor for less KV (outrunner can get with less than 900kv) if you got some friend who playing with rc models, ask him about and he will tell you how this going...
Just a 20-25mm aluminium wheel direct on motor shaft, that wheel got a groove size of wrope, and than anotger tiny grew(3mm wide) where come rubber o ring, for better grip to wrope.
Thanks, it's hard to say because component is old and were expencive those days, but today lets say... Gimbal about $50 Motor, esc $50 Battery $20 AV transmitter and reaceiver $30 And a bit more electronic lets say about $10 Lcd and remote got from other project but remote with reaceiver can be buy for 20-30$ Lcd 10-20$ And a frame is diy, let's say $50. But as i say i got everything from rc models and older project so i don't buy nothing for this project. Heave a nice holidays, Tine
Walter Wu no the transmetter and reaceiver is basic rc for control rc plane, boat cars... Gimbal don't got the buildin reaceiver, it only got ppm input so you connect the gimbal and reaceiver wit pice of wire.
tintek33 cool. If I ever get round to having those parts may do something like this. Let me get my connectors for the battery then will try the osmo battery first
MarcoCanaleParola sorry but as i say i buy the frame from my friend who leave the project years ago, and for him laser cutting make some other, i will ask if there some files...
MarcoCanalePerola It takes like 10 minutes to draw the sides of the frame in cad and if you dont have a laser cutter or cnc you just gotta do it the old fashinoed way with a file and angle grinder.
Hi, I really like the projected.Gratulations. I would like to build my own system too. Thank you very much for sharing the parts. I want to ask you how to program this project? And how can this integrate this knob for example? hobbyking.com/en_us/hg3d-3-axis-handheld-aerial-stabilizer-gimbal.html
Tar Károly thanks, yes you can use this gimbal, you just need enough power motor and esc, there is nothing to programming except trabsmitter for some limits or speed adjustment.
Thanks, then what do you use is not enough to move such a gimbal? I'm sorry I'm starting in electronics. If I guess the bigger spindle I need a controller that I can control with a remote control. How do I get the engine and the gimbal control?
gimbal and motor controller (ESC) connect to reaceiver (2 channel for gimbal and one for motor esc) reaceiver come together with transmitter. If you don't know much about this type of electronic, find some local friend who work with radio contolled models (cars, boat, mlticopter whathewer, they all got ESC transmitter, reaceiver and battery.)
Hi, I'm trying to chat and I've entered a couple of groups, but I do not really get a reply. I do not want to be intrusive or cause problems.If you do what you have to do, I'll thank you for it.I thought I was in here.I can send mail if you confirm.projectfileok@gmail .com
Hi bro, would you mind to share the blueprints? thank you
Can you send me how you built? How do you fix de components gimbal controler?
Hello, can you drop the link of the motor you are using
Very good work. How did you put the gimbal together? Maybe a scheme?
it's a bought gimbal (DYS Smart3 3 Axis GoPro Gimbal with AlexMos Control Board)
I wonder what can be the best way to tighten a cable in a large hall/venue (indoor) without attaching to walls. I was thinking of heavy crank stands, or is there a better way?
huh i don't got any idea how to mount without some infastructure... maybe you can use some heavy crank stand, but there is not small force my friend, i tighten rope as i can here but few runs and camera was almost in the grass, because rope is stretched in a few runs, so i must tighten it every few times.
Im planning on building one of these for using indoors as well. Let me know if you come up with a good way to do it. I'm thinking wooden stands with weight added to them would be sturdy enough.
which model of esc did you use to reverse the brusless speed?
Cheapest one from hobbyking 1:10 rc car kombo
Hi, awesome work and video. I would like to ask you: in a part of your video you speak about vibrations that your system has at low speed, but I can’t understand what you say about it. What you think is the cause? Too high kv? Motor type? Anything else? If you should answer if should be great for me! Thank you a lot! Awesome project and video.
it's problem in motor, i didn't try yet but i think brushed motor will work better, because it got much more torque at low rpm, brushless motor somekind loose steps if we overload it into low rpm so it make vibrations, like car engine...
But with brushed power there coud be problem on high speed, lot of consumption, heating...
Perfect choose will be some servo motor but they'r very expencive
TinC33 thank you so much. very kind and precise!
@@cristianosox the best solution will be brushless motor and a transmittion with two or 3 gear, and servo for shifting them, i thinking in that way, but project stuck on that point, because barley filming outdoor so only use 1-2 times per year.
Bello, la voce e l'enfasi soprattutto
Marco Lissandrello però che progetto 🤘🏾
@@riccardolivesu7270 si bello davvero, impegnativo pure
Can you send me the link where you bought the gimbal
I buy in hobbyking but a few years ago, i don't know if it still for sale, try to google it fo "dys 3axis gimbal for gopro"
hi, i need one. How much does it cost to make one?
Hy actually it's not for sale, and got no time to make another, also that one isn't finished yet motor stil vibrating must to solve that with some transmission or something....
Hello. Where I can get such a little winch?
You mean winch for spanning the rope, i make it you can see on my other video
Really cool! well done! I love this channel.
Isidoro Maich thanks
Hi TinC,
thank you for sharing this cool project.
I am willing to built a same device like yours. Today I started with buying a 6 channel remote + reveiver and right now I am looking for a 3 axes gimbal.
Could you make a short list of the electronic devices you used please. Maybe direct into the video description not only in the answers of some comments. I mean it is alright to read them all cause there aren't so much but if the useful information were right under the video it would be perfect.
Unfortunately I didn't get all of the words you said cause your music is so "loud" even in your speaking parts.
Thank you for your effort filming all the steps you did and sharing them with us.
Great job.
Greetings
hy, thanks, i edit the description, if there something else just ask, about motor i can't tell you wich is perfect, because if you want to go fast there was problem in slow movement, and if you want smoot slow movement, the end speed wasn't fast, there will be perfect if you make some quick realese coupling for motor so you can change the motor depend on what result you want heave.
Good morning,
thank you for your quick response.
It helps me so far very well.
I'll ask if I'll have an issue.
I did some search myself.
Just to be clear if I don't have/want a video transmitting system I won't need an LC filter and step up..., will I?
In that case I just need:
- aluminium rig and the other mechanical hardware parts
- HobbyKing X-Car 21.5 Turn Sensored Brushless Motor (1489Kv) [--> it would be better if the motor has < 1000 kV]
hobbyking.com/en_us/hobbyking-x-car-21-5-turn-sensored-brushless-motor-1489kv.html
- Hobbyking X-CAR 80A Brushless controller (sensored)
hobbyking.com/en_us/hobbyking-x-car-80a-brushless-esc-sensored-sensorless.html
- 3 axes gimbal
- Turnigy nano-tech 5800mah 2S2P 30~60C Hardcase Lipo Pack (ROAR APPROVED)
hobbyking.com/en_us/turnigy-nano-tech-5800mah-2s2p-30-60c-hardcase-lipo-pack-roar-approved.html
- FrSky V8R4-II 2.4Ghz 4CH Receiver [--> depends on your remote]
hobbyking.com/en_us/frsky-v8r4-ii-2-4ghz-4ch-receiver.html
All true, but you don't need exactly this parts, i choose it, because i got it from old pproject, battery i used from rc car, receiver you got by the transmitter you buy, there are thousnd of different reaceiver and all got the sam function, ESC (speed contoler) you must bought depend of motor choose, but if you take 80A there will be enough power, maybe look for some outrunner motor for less KV (outrunner can get with less than 900kv)
if you got some friend who playing with rc models, ask him about and he will tell you how this going...
helllo, can I use sensorless motor ?
Sure, but there will be more vibration duting low rpm, maybe even brushed motor will be better.
professional work, good
Damian Sckott thanks
awesome work
This is awesome! What did you use for the drive wheel?
Just a 20-25mm aluminium wheel direct on motor shaft, that wheel got a groove size of wrope, and than anotger tiny grew(3mm wide) where come rubber o ring, for better grip to wrope.
Which gimbal did you used
Dys 3axis gimbal for gopro 3-4
Can you tell me the pieces for motor system?
Rodri Segura it's senzored motor and esc for 1:10 rc car, wirh lowest possible kv.
Grandios 😍 😍 😍
Hi great work! How much did it cost in total?
Thanks, it's hard to say because component is old and were expencive those days, but today lets say...
Gimbal about $50
Motor, esc $50
Battery $20
AV transmitter and reaceiver $30
And a bit more electronic lets say about $10
Lcd and remote got from other project but remote with reaceiver can be buy for 20-30$
Lcd 10-20$
And a frame is diy, let's say $50.
But as i say i got everything from rc models and older project so i don't buy nothing for this project.
Heave a nice holidays, Tine
@@TinC33 Hi thanks for your reply. Do you have the cad file for the frame? How can I contact you?
@@ulliuffhausen5590 sorry but don't got files because this frame was cutted by friend who give up on that project, my mail can find into channel info.
This is like a mini spider cam. Really cool project. Just to clarify. You modified the remote to control the Gimbal?
Walter Wu thanks, yes i use 3 channels, one for control the main motor and two channel for controll the gimbal.
tintek33 so you need to change the frequency to match the Gimbal?
Walter Wu no the transmetter and reaceiver is basic rc for control rc plane, boat cars... Gimbal don't got the buildin reaceiver, it only got ppm input so you connect the gimbal and reaceiver wit pice of wire.
tintek33 cool. If I ever get round to having those parts may do something like this. Let me get my connectors for the battery then will try the osmo battery first
good job my friend I love u
Thanks
Bravo TinC! Care!
Tine Mazgon hvala, hehe če boš nucav pavej.
Looks good, but could barely hear a word you said
amazing!
you need to have the music off when you talk, it is hard to understand you, other wise a good video, can you do a video on how you made it.
I know, on my latest video i set muaic really low behind because without music the video is so "empty" and my pure english come out horrible.
Hi friend can you please sell me the frame project for bring it to my laser macchine? Thanks for your video!
MarcoCanaleParola sorry but as i say i buy the frame from my friend who leave the project years ago, and for him laser cutting make some other, i will ask if there some files...
tintek33 Found something?
MarcoCanaleParola sorry nothing.
MarcoCanalePerola It takes like 10 minutes to draw the sides of the frame in cad and if you dont have a laser cutter or cnc you just gotta do it the old fashinoed way with a file and angle grinder.
Hi can anyone give me the file for laser cutting?
Good job, u think it can carry a dji phantom?
Why would you like to carry a dji phantom pro?
do you have e mail??
i need one
Hey bro well did bro i do have some doubts about that so will you give me your gmail id ?
Hi, I really like the projected.Gratulations. I would like to build my own system too. Thank you very much for sharing the parts. I want to ask you how to program this project? And how can this integrate this knob for example?
hobbyking.com/en_us/hg3d-3-axis-handheld-aerial-stabilizer-gimbal.html
Tar Károly thanks, yes you can use this gimbal, you just need enough power motor and esc, there is nothing to programming except trabsmitter for some limits or speed adjustment.
Thanks, then what do you use is not enough to move such a gimbal? I'm sorry I'm starting in electronics. If I guess the bigger spindle I need a controller that I can control with a remote control. How do I get the engine and the gimbal control?
gimbal and motor controller (ESC) connect to reaceiver (2 channel for gimbal and one for motor esc) reaceiver come together with transmitter.
If you don't know much about this type of electronic, find some local friend who work with radio contolled models (cars, boat, mlticopter whathewer, they all got ESC transmitter, reaceiver and battery.)
Hi, I'm trying to chat and I've entered a couple of groups, but I do not really get a reply. I do not want to be intrusive or cause problems.If you do what you have to do, I'll thank you for it.I thought I was in here.I can send mail if you confirm.projectfileok@gmail .com