My laptop acer v3-471g started to feel unconfortable beacause on the part if the touchpad its gets slight hot and extremely hot when playing games i suspect the chipset with passive cooling, the problem started about a week ago it is not the bios update problem because i update the bios after two days after the problem occur... is there any way to make that chip cooler, the passive heatsink is replaced with a thermal pad but same problem.or is it the memory card problem cause i have two different brands of memory card one with that came when i bought the laptop and the other is crucial
I have dell N5110 My laptop didn't on...I took to shop the technician said North bridge is short cirucited and can't be repaired....need to buy a new board....please suggest me some ways so that I can replace the north bridge so that i can repair my computer in low cost
Hello, thanks! It's hard to tell because it depends on the size of the balls and chip, I used approximately 160 degrees and low air pressure. You do have to monitor how the balls stick to the chip though. It's all down to practicing... A lot
és működik is vagy csak szépen átforrasztottad, de nem megy a laptop??? :-) and it works too or you just soldered it nicely but it doesn't go on the laptop ??? :-)
+Kyle LaFountaine is safe the temp of 69-70°C for the nforce4? 'cuz i have an old pc that had lost it's fan from the radiator and it had(and still has) the same temps. that fan didn't do a thing.
Florinel787 While it will run safely (Assuming that temp is at full load) I still suggest getting some sort of air flow over the heatsink as the nforce chipsets, in my experience, tend to be a bit more sensitive to the thermals than Intel's. Whats the motherboard model? One thing I highly suggest is replacing the thermal compound under the heatsink as those chips tend to run hot and they tend to have crappy silicon like compound from the factory.
+Kyle LaFountaine it's a msi k8n-neo3 mobo and i replaced the thermal paste recently and since that fan broke, i took a fan from an old amd cooler and put it so it can cool the radiator, but still that temp range...
Mixz No problemo, I just hate it when people don't link the music titles or people don't ever respond back to ya and I didn't want to be a part of the problem :P
***** The title of the music is "World Without End" Brand X Music. I just use my Shazam app with my iphone and I get the name of the music. Piece of cake right.? Let me know.
Would be a better video without the dramatic music and the out of focus shots.
OMG that was AWESOME!!!!!
magic device and complicated process.
Really Superb :)
The flux is made in USA!!! YAY for non-China stuff! :)
BTW, insane operation, and very well done!
My laptop acer v3-471g started to feel unconfortable beacause on the part if the touchpad its gets slight hot and extremely hot when playing games i suspect the chipset with passive cooling, the problem started about a week ago it is not the bios update problem because i update the bios after two days after the problem occur... is there any way to make that chip cooler, the passive heatsink is replaced with a thermal pad but same problem.or is it the memory card problem cause i have two different brands of memory card one with that came when i bought the laptop and the other is crucial
I have dell N5110 My laptop didn't on...I took to shop the technician said North bridge is short cirucited and can't be repaired....need to buy a new board....please suggest me some ways so that I can replace the north bridge so that i can repair my computer in low cost
wats time use to final reball?. ah its posible use the same chipcset ?
Where can i buy new north bridge for lenevo laptop.
Good work!!! but i need your help in somethings,what is the temperature of the hot air for welding the balls to the chip? thanks you advanced
Hello, thanks!
It's hard to tell because it depends on the size of the balls and chip, I used approximately 160 degrees and low air pressure.
You do have to monitor how the balls stick to the chip though.
It's all down to practicing... A lot
What is yours soldering temperature?
Hi!!!!Excellent job!!!You have the Scotle IR360 PRO??
Can you please tell me which profiles are using to unstick and stick BGA???
Thank's!!!
Can this be 100% successfull?How muchit cost?
Where you are repairing pc motherboard we have to replace chipset of my desktop motherboard it is heating. Please give your address
you dont stick a chip on with flux wheres the soldering? do you not need solder paste and a stencil?
Did you use flux in desoldering process?
Soldering with inserted cr2032???????????????
+200 deg with the BIOS battery still installed? WTF! @2:23
és működik is vagy csak szépen átforrasztottad, de nem megy a laptop??? :-)
and it works too or you just soldered it nicely but it doesn't go on the laptop ??? :-)
Do this succed?
What's the maximum safe temperature for avoiding northbrigde problems??
Generally I use 80 but it mostly depends on the chips specs.
+Kyle LaFountaine is safe the temp of 69-70°C for the nforce4? 'cuz i have an old pc that had lost it's fan from the radiator and it had(and still has) the same temps. that fan didn't do a thing.
Florinel787 While it will run safely (Assuming that temp is at full load) I still suggest getting some sort of air flow over the heatsink as the nforce chipsets, in my experience, tend to be a bit more sensitive to the thermals than Intel's. Whats the motherboard model? One thing I highly suggest is replacing the thermal compound under the heatsink as those chips tend to run hot and they tend to have crappy silicon like compound from the factory.
+Kyle LaFountaine it's a msi k8n-neo3 mobo and i replaced the thermal paste recently and since that fan broke, i took a fan from an old amd cooler and put it so it can cool the radiator, but still that temp range...
whats the song name?????
youtube says its "World Without End by Brand X Music"
awesome ! thanks man!!!
Mixz
No problemo, I just hate it when people don't link the music titles or people don't ever respond back to ya and I didn't want to be a part of the problem :P
yeah me too!
***** The title of the music is "World Without End" Brand X Music. I just use my Shazam app with my iphone and I get the name of the music. Piece of cake right.? Let
me know.
Very expensive..
Whistle while you work would be a better background song.
Too much flux