Thank You for the spin at the end. I see where I went wrong on my first attempt. Started with the boom on one SIDE so I had one track up and one down. Got to have both tracks either front or back lifted 😂.
I know you’ve had trouble with the teeth in the past, since we got a 40 I have lost all of the teeth off the Kubota bucket regardless of pin design. I have since replaced the mounting brackets on other brands of buckets to fit the Kubota and have had no more issues. Sold that loose fitting pos Kubota factory bucket and problem solved lol😅
Yes, I feel that the new machines have gotten more powerful, and the tooth / pin design has been outdated. I just hate to replace all 5 of my toothed buckets. But it sure gets frustrating at times.
I have the same Kubota KX 040, I only have about 40hrs, have a few questions, where do you keep the throttle at while working? And ounce in while the machine gets a little jumpy while working, what causes this. Thank you much.
I run full throttle. The jumpynes comes from being too quick with the controls. The 40 is very quick responding and is easy to get it to bounce and be jumpy. Just take your time and get used to the machine. Just practice. Thank you for watching, and have a wonderful evening 😀
@@jeramyreberpuredirt7873 You are not alone in this. Some channels do it routinely while others struggle to ad it. I have no experience in editing so cannot help. If it becomes too much, jsut let it go. Luckily, your voice is better than most and more easily understood. And, thankfully, you place the camera in front of you in the cab and not behind, so it picks up better. I also appreciate your "one step beyond" service in cleaning up the area for your customer. Very thoughtful. Enjoying the channel.
Thank You for the spin at the end. I see where I went wrong on my first attempt. Started with the boom on one SIDE so I had one track up and one down. Got to have both tracks either front or back lifted 😂.
Yep, just a little practice and you will have it. Have a wonderful evening 😀
I know you’ve had trouble with the teeth in the past, since we got a 40 I have lost all of the teeth off the Kubota bucket regardless of pin design. I have since replaced the mounting brackets on other brands of buckets to fit the Kubota and have had no more issues. Sold that loose fitting pos Kubota factory bucket and problem solved lol😅
Yes, I feel that the new machines have gotten more powerful, and the tooth / pin design has been outdated. I just hate to replace all 5 of my toothed buckets. But it sure gets frustrating at times.
Nice job Jeremy.
Thank you
I only wear my seatbelt on steep ground otherwise I’ll fall out of the seat. I also disconnected my travel alarm for my own sanity also.
Yep, me too. None of mine have had travel alarms. Our skidsteer and dozer had backup alarms. The first thing we did was disconnect them.
I figured you would be showing off your new toy.
Not yet. I am waiting for materials to start its first job. It's killing me not getting to play with it.
I have the same Kubota KX 040, I only have about 40hrs, have a few questions, where do you keep the throttle at while working? And ounce in while the machine gets a little jumpy while working, what causes this. Thank you much.
I run full throttle. The jumpynes comes from being too quick with the controls. The 40 is very quick responding and is easy to get it to bounce and be jumpy. Just take your time and get used to the machine. Just practice. Thank you for watching, and have a wonderful evening 😀
👍
🙂
Alas, no CC, but good content.
I will keep trying.
@@jeramyreberpuredirt7873 You are not alone in this. Some channels do it routinely while others struggle to ad it. I have no experience in editing so cannot help. If it becomes too much, jsut let it go. Luckily, your voice is better than most and more easily understood. And, thankfully, you place the camera in front of you in the cab and not behind, so it picks up better. I also appreciate your "one step beyond" service in cleaning up the area for your customer. Very thoughtful. Enjoying the channel.
@bobgrier3103 ❤️ Thank you very much, that means a lot to me.