Supertramp Flagship LT Camper Tour Part 2 - The Supertramp Camper
Вставка
- Опубліковано 27 лип 2024
- Part 2 of my Supertramp Flagship LT tour and walk-through. In this video, I will take you on a detailed tour and review of my 2023 Supertramp Flagship LT truck camper. This truck camper is going to be my full-time home on wheels and a lot of work has gone into configuring the Supertramp camper and the truck to meet my needs for work connectivity and off-road travel.
Part 2 of the Supertramp Flagship LT Camper Tour: • Supertramp Flagship LT...
#supertrampcamper #supertrampcampers #supertrampflagship
Very nice camper and very smart what you did to add a water filtration system so you can refill water from a lake or stream if you really needed to.
Thank you :-)
Excellent!
Many thanks!
Thanks for your thorough walk-through. I recently became aware of the Supertramp campers. Looking for more info I found your channel. I love your set-up with the flatbed and your upgrades. It must have taken you some time to do all of the mods. I wish that all of your mods were standard features on the Supertramp. In your latest video, you told everyone that you sold the rig and explained that it did not work for you because of the lack of space to work. I can see that. If I were ready to buy, I would have jumped at the opportunity to buy your rig. But then, maybe, I would have also concluded that it is a small space to live. I am excited to see what you choose next.
If I would be just out there adventuring - my previous rig was perfect for that. Even full-time adventuring and travel. And maybe I am overly critical about why I sold the rig. Of course I could have made this work somehow. It's not that it was impossible, but I still have to work a few years and also want to build a business on the side and that is just where I felt that it would be better to start over. It'll cost me some money and I am aware of that, but I also feel that in the long run a new rig will pay off. I did order a Rossmonster Baja and will make a video about it soon to explain more (a few things (out of my control) in my personal life are changing and I am a bit behind in recording that specific video).
Anyway, thank you for watching my video and for leaving a comment. I really appreciate it.
I like it...great job covering the tour...i subscribe...thanks
Thank you. I appreciate you.
Hey mate great vid and great setup you have looking forward to see your travels we are located in Australia QLD thanks.
Thanks, man. I hope to take this truck down to your neck of the woods one day. Where in QLD are you located?
Hi nice camper! I ordered one and im slotted in for production in June. Thanks for the informative video. It was very helpful!
Quick question. Which size is your composting toilet? S,M, or L?
Thank you. It's the M and it fits perfectly in there even with the Teakwood shower "mat".
Thank you very much. Really appreciated
I noticed in one of your videos (might not have been this one) a paper towel holder over the sink. Was that attached via magnet or adhesive? I'd like to do the same on my soon-to-be delivered Flagship. If you still have the link for the holder, would you mind sharing? Thanks. I've enjoyed all your content and learned much. Your new rig looks to be a winner!
Thank you for watching my videos. I appreciate it a lot. Yeah, can't wait for my new rig to be complete.
The paper towel holder is magnetic. Here is the link: amzn.to/3z3YRlo (affiliate link - thank you for supporting my channel). I used these magnetic parts on the ceiling. They were Ok. amzn.to/3RvTu4w
@@dtadventure4x4 wonderful! I ordered both. Thank you!
Great video…loved the detail. We are in Canada looking to build a similar rig.
Interested in the relocation of the Ford blind spot sensor. The flatbed manufacturers I’ve talked with say the Ford sensor cannot be located as they are embedded in the taillights. Can you provide more details? Did you have to brake open the taillights? Are the brackets standard with your flatbed?
Thanks! Will continue to watch with interest…
We took them out of the taillights and Basil manufactured custom mounts to attach them to the rear. They seem to function fine from what I can tell. I went through heavy rain yesterday as well and it all seemed fine. I do not know if they are water-proof but would assume they are. You could probably use a 3D printer to make custom mounts.
If you want to message me and give me your email address I can email you some photos and answer additional questions.
Would you mind sharing what tote / bag that you have mounted on the back molle panel?
I got it from Amazon (amzn.to/4cbQSRs). It is the Joytutus Spare Tire Trash Bag, but it was easy to attach to the Molle panel. It is a bit more compact and narrower compared to many others. I tried a few and returned them.
Sorry one more question. Is there a litter you recommend for the toilet?
I am not using it as a composting toilet. I bag it every time and I empty the urine container once a day.
Hey Chris. What did you use for the ceiling paper towel holder. Suction cups?
The paper towel holder is magnetic and I stuck two matching phone magnetic backplates to the ceiling. I used those for some magnetic, rechargeable lights as well.
@@dtadventure4x4 Thanks!
Love all the storage. Does the flat bed have a higher bed height than the stock bed floor height? If so, how much higher?
Yes it does! I never measured it. But note that the original brackets that came with the flatbed were even higher. We lowered the bed as much as possible to reduce the height and center of gravity. I think we brought it down 7 inches or so.
what kind of flat bed/utility bed is that?
It is a Mits Alloy flatbed.