@@throttlechaser541 Yes, that one is OEM. The best one to buy for a 2017. Bazzaz you gotta splice multiple wires in, drop 4 wires under your air filter. It was aweful. AND no auto blipper.
I have a suzuki gsxr1000 non quickshifter but I want to add the oem one. So im guessing like me your model was non quickshifter and you added the factory shifter. How did you know it would work? I want to do the same thing. GREAT JOB BRO.
The oem quick shifter on this bikes cbr1000rr after 2017 is an option. They come preset and ready for it. You need to check online about your bike and see. I know the gsxr1000r comes with a factory quickshifter
I have the same exact bike. I learn a lot with you I going to buy the quick shifter to put it on it and I want lower a little bit what you think about it ??
And I want try to make wheelies. The wheelie control really works like if i do something stupid the bike control the extra power or something like that ??
Instructions says to disconnect the negative terminal of the battery. Also said to do that when I installed my exhaust. I normally don't disconnect the battery for anything. But I want to be safe and ask. Did you disconnect or need to disconnect your battery?
Hey question so the one you listed shows it’s for a 2018 -2019 and online they gave different one for 2017 I ordered it and it didn’t come with the piece you plug into under the seat once installed the quick shifter
This one is oem. Power commander is usless on this kind of bikes. Flash your ecu and buy the oem. Plus the aftermarket one i don't think it has auto blip
I just received the honda plug for the back instead of a paperclip and my quickshifter will be here tomorrow. Glad you made this video very helpful. This quickshifter and blipper will go great with my high flow filter my akra exhaust and my ecu the was flashed by Moore Mafia.
The ecu flash made a huge difference. The throttle was super touchy and first gear even with tc off was none existent. At higher rpms the bike was great. But with the ecu flash the throttle is nice and smooth because it no longer has the complete loss of power when you let off. Think it's called throttle cut off. But in the end I probably gained 20hp down low and 20hp up high. My next mod it to remove the ram air ducts and take our the plastic inserts that block 40% of the airflow. Us regulations because the euro models don't have that. But leaving the resonators on because they serve a separate purpose. I've seen vids of people taking that off also but they obviously do not do there research because you will lose hp if you remove the resonators. You just remove the plastic inserts that are glued on.
www.partzilla.com/product/honda/08U70-MKJ-D00?gclid=CjwKCAiAxKv_BRBdEiwAyd40N-9zUd9zE2Nc_UqcI5RKDID-RA1zIm6L6Y40C7htuH0iijuJ44Nh1RoCUVQQAvD_BwE this is the one. Try ebay as well. Might find a better deal
I am sorry buddy, i don't know what works for that. I think you need an aftermarket one and i am not sure if auto blip is going to work with your model
@@NRIBEIRO74 This model has cornering abs too not just abs which is great.If you racing however you can pull out the abs fuse or remove the abs system completly.However i wouldnt because abs on this bike is insanly good only if you are a pro racer you will outrun it.
agreed. Thought about but decided not to. Guess I'm a bit old school where I like using the clutch. lol. I can see however how this is a plus for track riding.
I got it installed!! It was so easy!!!!! That quickshifter is badass!!!!!!!
Hey what year is your bike and witch one did you order ?
@@tonyjetson9706 I have the 2017 and I ordered the exact part number he provided. Very easy to install and program.
I ordered my quickshifter. Should be here in a few days.
Sold the bike but that was rhe best thing ever!
Thanks for the video...I hope to do this to mine very soon.
awesome vid! was thinking to buy it / let it install but might do it myself..
I put a bazzaz QS on my ol' 2014 model. Holy hell that was a much harder install.
I believe. This is a factory one so it was piece of cake
@@throttlechaser541 Yes, that one is OEM. The best one to buy for a 2017. Bazzaz you gotta splice multiple wires in, drop 4 wires under your air filter. It was aweful. AND no auto blipper.
Installed 🙏🏽
I have a suzuki gsxr1000 non quickshifter but I want to add the oem one. So im guessing like me your model was non quickshifter and you added the factory shifter. How did you know it would work? I want to do the same thing. GREAT JOB BRO.
The oem quick shifter on this bikes cbr1000rr after 2017 is an option. They come preset and ready for it. You need to check online about your bike and see. I know the gsxr1000r comes with a factory quickshifter
Super!😊 I did it according to you. 😊
Glad i could help!
@@throttlechaser541 I'm from Czech republic 😀. I have a new one QS. Thank you
Do you have to put bike in maintenance mode or is automatically active
Hi, so the bike doesn't come with its own quickshifter from the factory after all? I thought it did.... even up and down
Hi! Nope, that is an extra add on to it. Some dealers sell it with the bike but you pay extra!
What’s the part number?????
I have the same exact bike. I learn a lot with you I going to buy the quick shifter to put it on it and I want lower a little bit what you think about it ??
And I want try to make wheelies. The wheelie control really works like if i do something stupid the bike control the extra power or something like that ??
I would not lower it. As far as the wheelie control goes, it will cut the power if you have it on and you will try to wheelie
Love the video
Do you have to get your ECU Reflash are it just plug and play
Not reflashed but you have to set it up like in the video. Thanks!
@@throttlechaser541 No problem you’re Video help a lot I just installed mine keep posting those video. Thank
@@throttlechaser541 what is the quickshifter part number?
@@Ramakan www.partzilla.com/product/honda/08U70-MKJ-D00?gclid=CjwKCAiAxKv_BRBdEiwAyd40N-9zUd9zE2Nc_UqcI5RKDID-RA1zIm6L6Y40C7htuH0iijuJ44Nh1RoCUVQQAvD_BwE
Instructions says to disconnect the negative terminal of the battery. Also said to do that when I installed my exhaust. I normally don't disconnect the battery for anything. But I want to be safe and ask. Did you disconnect or need to disconnect your battery?
I read that as well but i didn't fo it. I think that is just to be safe of shocking yourself or something like that
great video explanation
Thanks man! I am trying my best. Is a little difficult because english is not my first language
what is that in front of your QS that you took the cover off? my 2017 fireblade doesnt have that
I don't remember exactly and i don't have the bike anymore to check
It’s the evap canister cover
Wow that’s easy!! How much was the kit?$
It's about 600$
Where did u order it from ? I got me a new CBR too
Ebay
Does the Quick Shifter automatically do Auto Blip? Or is that something you have to Install Separately?
This one does have auto blip as well
Thaaaaaaaaanks!!!!!
My pleasure man!
Can you put an updated link? I wanna do this with mine. Have you noticed any issues?
I don't have the motorcycle anymore. No issues while i had it
@@throttlechaser541 any issues I should look out for?
Not that i am aware of
Hey question so the one you listed shows it’s for a 2018 -2019 and online they gave different one for 2017 I ordered it and it didn’t come with the piece you plug into under the seat once installed the quick shifter
I am not sure. I don't have the bike anymore. That is the one i had and it worked fine
The thing i pluged in was a paper clip. Any wire works. Doesn't come with one
Hola, qué tal? Perdona donde puedo comprar el quickshifter original? Muchas gracias, Un saludo
English please
YO YO YO, do you know if this needs to be done if you replace battery
I think it saves the settings
@@throttlechaser541 yes, it did save settings after all.
The one in looking at just plugs into the power commander it's less than 200 dollars is it worth or should I spend more for a better
This one is oem. Power commander is usless on this kind of bikes. Flash your ecu and buy the oem. Plus the aftermarket one i don't think it has auto blip
hi, where can i buy the quickshifter? do you have to install something in the ecu? or flash the switchboard? Thank you so much
You can buy one from ebay or from a honda dealership. After you got just do what i did in my video and it will work
Did you have to flash the ecu with race tools to turn on the quick shifter? Or did you just have to hook it up and good to go?
No flash. Is more than just plug in. Watch all video and you will see. I explained the hole process there
I just received the honda plug for the back instead of a paperclip and my quickshifter will be here tomorrow. Glad you made this video very helpful. This quickshifter and blipper will go great with my high flow filter my akra exhaust and my ecu the was flashed by Moore Mafia.
@@jeremybly i am glad you find it helpful. I am planning on flashing the ecu at a point. I was just so busy lately, didn't have much time
The ecu flash made a huge difference. The throttle was super touchy and first gear even with tc off was none existent. At higher rpms the bike was great. But with the ecu flash the throttle is nice and smooth because it no longer has the complete loss of power when you let off. Think it's called throttle cut off. But in the end I probably gained 20hp down low and 20hp up high. My next mod it to remove the ram air ducts and take our the plastic inserts that block 40% of the airflow. Us regulations because the euro models don't have that. But leaving the resonators on because they serve a separate purpose. I've seen vids of people taking that off also but they obviously do not do there research because you will lose hp if you remove the resonators. You just remove the plastic inserts that are glued on.
I want a ecu flash as well. About the other thing, do you really need that much more power?
Wish i had that bike. :-D
What year cbr's come with this prewired on do you know?
2017 and up
Hey man, can you send me the link of the qs u got? Thanks!
www.partzilla.com/product/honda/08U70-MKJ-D00?gclid=CjwKCAiAxKv_BRBdEiwAyd40N-9zUd9zE2Nc_UqcI5RKDID-RA1zIm6L6Y40C7htuH0iijuJ44Nh1RoCUVQQAvD_BwE this is the one. Try ebay as well. Might find a better deal
Would this work on a 2015 Honda cbr ?
Nope. 2017 18 and 19
@@throttlechaser541 can you recommend me a qs for my bike please
I am sorry buddy, i don't know what works for that. I think you need an aftermarket one and i am not sure if auto blip is going to work with your model
Hi, can I have the quickshifter part number please ?
Thank you !!
Here it is: 08U70-MKF-D40
Thank you for your quick response 👍 can you please tell from where I can download the installation instructions?
I am sorry but i don't remember where i got them from
I have the same bike with same shifter. do you know how to reverse the gears? first up and the others down. THANKS
Yes, ypu need to change the position of the shift rod. Is preety easy
@@throttlechaser541 then should I change the pedal board (adapt the pedal)?
Should I change the support pedal?
@@throttlechaser541 Should I change the support pedal?
Google "gp shift" and there are tons of videos on how to do it
So week you did ON up and down it's gonna let you go up shift AND downshift?
As in blip?
@@babayega_ I'm surprised nobody has replied sooner but the answer is yes, this also provides clutchless auto-blipped down-shifts.
Hello! Do you know abs off in this bike? thanks
You can not turn off the abs. You need to buy the one without abs
@@throttlechaser541 SP version don't have this model.. all SP have abs
@@NRIBEIRO74 This model has cornering abs too not just abs which is great.If you racing however you can pull out the abs fuse or remove the abs system completly.However i wouldnt because abs on this bike is insanly good only if you are a pro racer you will outrun it.
Is automatic transmission
No
Does anyone know if this is the same quick shifter to put on a 2018 model?
Yes, and 2019
@@throttlechaser541 awesome, thanks for the reply! Great video by the way, very informative!
@@throttlechaser541 what about 2021?
I am not lucky enough to know about that one lol
@@lildrippy8252 getting ready to turn mine on my 2021..... I'll let you know 😅
Nice video. I decided not to put this on my bike. Would be just a waste of money. I don’t need this
I do track days so i need it. If you only ride on the street you don't really need it
agreed. Thought about but decided not to. Guess I'm a bit old school where I like using the clutch. lol. I can see however how this is a plus for track riding.
My bike doesn’t want to start anymore 🤦🏻♂️
Check my video on how to install the qs and follow the instructions. It should work just fine
@@throttlechaser541 followed everything
The only problem now I can turn the quick shifter on or off doesn’t go to that step
Hmm...i don't know what to say
@@throttlechaser541 you said the white and green cable right?
I don't remember. Is like i said in the video