Here is the video fixing the track ua-cam.com/video/o-GLkzLRNq4/v-deo.html Here is the video burning this stump ua-cam.com/video/TvzjnId0OCw/v-deo.html Use code rockhill5 to get 5% off your order at: www.agfolks.com/product/537-eliminator-tree-puller-new-version Check out our skid steer playlist for more videos like this Skid Steers and attachments, including the John Deere 325G ua-cam.com/play/PLmYnhJtNUq7eMYSMYExz40ah9thbWvFUn.html Thanks for watching
Always makes me think of all the work our forefathers had to put into clearing farm land. They only had strong backs and hand tools, possibly a team of pulling horses to help. Makes me grateful for all their hard work to make this great country.
Tree stumps really are amazing structures. It’s a lot more fun watching other people fight with them. Your grandson always tickles me, and seeing him going at it back there I sincerely look forward to your content in 10 years when he’s getting one piece of equipment mastered after another. He’s got a priceless childhood happening right now. It will serve him well in life.
The BEST way to remove a root ball (stump) is not to cut the tree down. The tree's trunk makes an EXCELLENT lever for prying the root ball out of the ground. I'm not sure what kind of tree that one is, but I've pulled out a maple about that size using a mini-excavator by digging out the roots in front and behind (relative to the direction I wanted it to fall) and then reaching up with the excavator and pushing it over.
Yes, indeed. Using the enhance bending moment, cantilever fashion,over the thicker length of the trunk and apply a steady pull in the direction you want it to fall. Whilst it’s not imperative to remove the canopy, which can be used to increase the bending moment, it is deemed safer to do so to minimise risk of instability as tree tilts. Earth around base should also be loosened the assist root extraction during the induced toppling manoeuvre. Have seen this method successfully employed over 70 years ago . On a tree this size a 20ft lever effect could have been easily achieved.
I've already commented on this but he is a marketer who knows physics but would rather avoid solving the problem with physics and put on his Mighty Mouse costume. I have difficulty watching stupid people who believe that they are smarter than the laws of nature. I'm thinking that I will cataguized this guy under humor "stupid human tricks " As opposed to an intellectually minded channel.
Tremendous amount of respect and admiration to our farmers. Jack's of all trades and some of the hardest working, selfless and under appreciated people. May God bless the farmers and their loved ones!
Very satisfying watching you get that stump out! A little determination and patience go a long way. Maybe not the most efficient way, but you did clear out the hole and that will pay off in the long run. I enjoyed this video.
Of all the things I've done with my 1025R and 260B backhoe, digging out large stumps has been the most un-gratifying and disappointing. Watching you pick at that stump brought back some bad memories - but I admit, seeing the sped-up video is encouraging to just keep picking at it. It may be hard to see the progress in real-time, but all that little picking adds up, as the sped-up video shows very well. Thanks for sharing again, Brock.
Bro, that stump gave you more problems coming out than some wisdom teeth I've removed. Your persistence paid off, as did having a variety of the proper tools.
Welcome to the channel and Thanks for watching. I have mostly Deere equipment. I have a newer 2038R, a 1941 model A, 325g track loader, 2 stand on mowers, and an old hay wagon for Deere
Hey Brock. Well. When I suggested digging it out I did mention packing a lunch. 😊 But at least doing it this way the stump is gone and you'll not have to deal with it again. I actually took out one almost that size with a John Deere 2305. It took me a couple of days but it was well worth it. What I started doing after that was tying the tree off as high as possible with a block and tackle, digging around them and breaking as many roots as possible and pulling the whole tree over and used the weight of the tree to pull the stump out of the ground all in one shot. It worked really well and saved a lot of work. God bless you and your family and God bless America! P.S. There's no doubt about who your grandson's best buddy is. 😊😊👍
I really enjoyed watching you cut up this tree and dig out the stump I think it is awesome I really enjoyed it keep on doing what you’re doing and I’ll keep on watching you
i gotta tell ya! you did some great work! wow...big big massive stump work! i think we can all say, we learned so so much from your efforts, that we might not have ever known!
The trick to burning out a stump is 1) Drill a reasonably big hole from the top. Use something like a 2" carbide tipped Forstner bit. This needs to go down to grade, or better yet, below grade so an extension is required. 2) Drill an intersecting hole from the side at or below grade. Start a fire near the intersection. Add some charcoal to get it going good. Once it is going get a fan/leaf blower to blow in the side hole. You won't be able to run the fan 24/7, but the longer it runs, the better.
Agree. What I've noticed in all of the "let's burn the stump out" videos, is that they light a fire on top and expect it to burn straight down into the stump and remove it that way. Fire doesn't work that way. Expanding on your idea, fill the 2" vertical drill hole with charcoal (broken up if need be), and drill 2 diagonally intersecting holes 90 degrees apart. Then light a road flare and shove it into one of the diagonally intersecting holes. The flare will light the coals deep inside and the other hole will provide air. Then just let it smolder. The radiant heat from the inside will burn it from the inside out.
I am in the middle of a voluntary project, clearing some land. So far I have removed over 30 stumps by digging 5 feet underneath each side of them with a JCB 3cx, then lifting and wobbling the things out. Yesterday for a change I had a 6 year old stump which just fell apart when I got the backhoe on it. I would like to try the burning out method, which I think would work well on a dry stump. The usual method is to scoop some wood out of the middle of the stump. Then cut an air hole, on the upwind side, as low as possible... Best of luck from N Wales...
Hey Brock, as you probably know by now, it’s the two thirds rule for trees. What you see above ground, there’s usually about two thirds of all that mass below ground. Great video, mate! 🙏
It ain't no step for a stepper...Way to go Brock!!! I agree with the observation made by another person; the video quality looks better (HD)! Broke your commitment to your channel/viewers goes Above & Beyond! thx, tommy
Thanks for the videos I have a large stump, after watching how much trouble it was burning , I will use my small backhoe to dig it out , I will be buying a stump grinder in the future. Thanks again.
Firstly, good on you for your tenacity! Here is my 2 cents. My property is an ex Christmas tree farm with mostly doug fir trees that have matured to about 60 feet. I am constantly thinning and clearing. I have tried every short cut method possible and here is what I've learned. Stump grinder; effective and looks great when finished but the rest of the stump dies years later and leaves a big hole. Burning; ineffective and just makes an ongoing mess. Tree toppling; pushing the tree over with the tractor (3320) is effective if the root ball is diseased. Look for mushrooms around the base. It's a dead giveaway. Digging out; this is the last resort and most time consuming. But if you must, find and cut the main perimeter roots and try pushing the tree while it is intact. Use the leverage of it's own weight. If that fails, cut the tree about 8 above the ground. Dig and find the main perimeter roots and break them. Once the main roots are broken the tap root will be all that is left. Sometimes it will give you the most trouble because it is the hardest to access. Pick away to loosen the soil near the tap root. Once that's done start rocking the trunk. At this point it will come out fairly easily. I carry the stumps to a burn pile and light them off in the winter. No more stumps!
Way to stay with, I kept trying to tell you to "go get the stump puller!!!!" But I don't have a mic on my computer, and it doesn't have a flux capacitor so I don't think you could hear me a day or to ago when you were out there..... LOL Now make a playlist of this "adventure" and anytime someone suggests "burning" a stump out, just send them to the playlist, then you can grind the stump out (or dig it out if you need everything below grade gone as well). Have a great weekend!!!
if you ever end up burning another out you should try dig down next to it and making an air channel through it and injecting air with a leaf blower so it burns hotter from the center out same principle as melting metal in a furnace.
One way they used to do it is with a couple of wagon wheels mounted on a very thick axle. You fasten a long pole to the axle with a short end by the stump, and the long end roped to a team of horses. You chain the short end to the stump with the pole vertical. When the horses pull, you have 10:1 leverage pulling the stump up. If the ground is wet and you have cut off some of the roots some distance away, the stump will pull out.
I dug out a stump that big with an axe, hand saw, a shovel and a chain saw. It took the entire summer and I eventually got down to the tap root. In the process I dug a hole you could park a VW in below the lawn level. It was the most fun I ever had working around my house.
Crazy huh, I would have thought it would have popped out also. Well it's done . I knew it would take forever burning it . Also it makes the stump harder by burning . It changes the sugars in the wood . I think you could make a screen and never have to buy gravel again with all the rocks u have lol . Good job and take care . Todd
OK maybe burning it wasn't the best option... it has me STUMPED! :D Even digging it out that stump put up quite a fight! Definitely satisfying to see you victorious. On to the next challenge lol Thanks for sharing Brock!
I have a 12,400 lb excavator. I dig 3/4 round the tree leaving the side I'm going to fell the tree towards. Then I push it over and cut the tree off on the ground. Unless I absolutely have to I'll never cut a tree first then dig the stump.
For future reference, you drill a hole in the top of the stump. Pour oil in the hole. light the oil in the hole. Tie some corrugated metal around the stump. Leave it alone for a few days. It will burn-out completely from the inside-out. Looking forward to seeing the next one work.
Just discovered this channel, it's awesome. I guess the moral of the story is, if you want to have a couple days of macho fun, burn it. If you want it out fast grind it.
Drill a 1-2" hole down into the center of the stump. Stuff it with black powder except the top foot or so. Stuff the top foot or so with dryish clay around the fuse and tamp it down. Light it and move away.
this was great. thank you for doing this. this was an eye opener. I knew it would be hard. very hard, but i underestimated the difficulty by far. Every step was sort of a fail, but you kept with it to show us. No wonder so many stumps are left behind. I suspect that the only easy way would be with a 35T+ excavator (not a low cost option).
Fantastic job digging that monster out. I couldn't help but notice bleed down on your backhoe. You may have a very small leak in the system. I have a Kubota about the same size as your tractor and I know how long it takes to dig stumps. Great job Brother.
just watched this again and was thinking it's about time to dig out a few more stumps. I must admit it is a lot of fun and a challenge on some of those things. Sorry I didn't get yo see you this year at the show in Louisville.
I used water (a garden hose), a chain saw, an ax and a shovel. Went fairly quickly.. Dug around the stump as far as I could. Washed the stump off to get rid of the sand as much as possible. And cut below the surface with the chain saw (and did some chopping with an ax). It took a while but was not that bad of an approach. Most of the stump is still there but below the surface of the ground.
Whole lot of work getting that thing out. Very deceptive of how much root was still left after the burn, the more you dug, the more roots appeared really showing how ineffective burning roots out is. Bet it feels good having that done. Looking forward to your future videos.
Yahoo the stump is out. After looking at the video it makes me wonder if you could have dug around the stump first and then set fire to it, the stump may have burnt better that way, I don't know, just a thought. Thank you and keep the videos coming.
Thanks for the comparrison of the removal methods. I dont have gear to dig a stump out or grind it, looking at hte effort I would likely rent a stump grinder if I ever need to remove one. IMO the fire was not as effectivte as it could have been because how low the stump was in the fire. Root balls are dense and likely wet wood where it was green wood, if you wanted to burn it ouf quickly I think you would of had to dig it out so the top of the stump is at the top of the fire not on the bottom to get more heat and oxygen. So to burn it out you would need to do 75% ore more of the digging then burn it and thats 2-5x the labor and time of just grinding it.
drill 20 holes and use sulphuric acid...wait 3 weeks and it comes apart easy. I did a 120yo 140 in stump tree in a front yard in Vancouver with a circular saw and acid and a pressure washer.
I'm really good at spending other people's money, so my solution is that you need to go buy a John Deere 60G to use for stumps and other projects. Who doesn't need a mini-excavator around the house? 😁
If you know in advance that you will be removing the stump it’s much easier to dig beside the stump on all sides then pull the tree over with the stump still attached so the weight of the tree helps to remove the stump
Great stuff! Now just stop for a minute and think about our grand fathers who had to take out thousand of those stumps so that they could have land to farm! No hydrolic tractors back then, just horse and lots of hard work! I can't imagine the painfull days it certainly was.
I took out the (smaller than yours - 120' high, but only 20" dia) eucalyptus stumps (with a larger - MF 3165 - backhoe) by digging around them and then pushing the tree over uncut, letting gravity pop the stump up. Some of the surrounding roots I had to "eat through" with the bucket teeth and some I had to follow out far enough that the bucket would finally break them. Also I dug around them with a "U" shaped hole (with the top of the "U" in the direction I wanted them fall) so that the back roots (which would hold the stump in tension) would have been (mostly) cut and ones in the direction of fall would just bend over. Additionally, my soil is pure sand (for over 400' down), so what works for me may very well not work for you.
1:17 Grandson ? ? ? Did you start procreating at age 12 ? ? ? I am a few weeks from having a 4' diameter mango tree cut down. Burning is my only option for stump removal. My plan after watching all THREE clips? A few bags of charcoal at the base, a blower, a chair, beer, and repeat every Saturday until it's gone. Thanks a lot. What I learned is.... Big fire is overrated. Blowers is underrated. There is no FAST way. Finally...... You are my new "man toy" hero. Thanks for the clip.
I know you didn't do this experiment because you felt you needed to. That said, this gives great credence to the proverb; "Sometimes it easier to plow around the stumps..." It's truly amazing just how extensive and strong those big tree root systems are..
Good stuff Brock. Like you said, this was a living tree so the stump is full of sap not letting it burn very well. I was amazed when that last big chunk popped loose, that attachment is a beast! Did you upgrade your camera? The last few videos look more HD
I know you must feel good that it's out b/c I felt relief when it came out. How much longer do you think it would of took to finish burning it? I do like your content of trying different things. It shows me how to do something or how not to do something.
Thanks for your effort. Based on the sequence of events, I think it shows that cutting of the stump above grade and the burning effort, was a waste of time. Digging it out was more practical. So, I thank you for an excellent video. I learned a lot from the video. Isaiah 55:6. O.
It's difficult to get under the stump with the backhoe. We have really soft ground here, no rocks larger than a baseball. Once I dug down about 4 feet all around the stump I was able to start shaking it loose. Oaks have a million small roots but no big tap root like pines do.
About 20 years ago I had on my land rwo trees, a little smaller than yours I think but big. I cut them down to the ground and burned them for three days and nights and then they were both gone. I put as you a lot of wood on and the fire got after a while also to the roots under the ground.
Here is the video fixing the track
ua-cam.com/video/o-GLkzLRNq4/v-deo.html
Here is the video burning this stump
ua-cam.com/video/TvzjnId0OCw/v-deo.html
Use code rockhill5 to get 5% off your order at: www.agfolks.com/product/537-eliminator-tree-puller-new-version
Check out our skid steer playlist for more videos like this
Skid Steers and attachments, including the John Deere 325G
ua-cam.com/play/PLmYnhJtNUq7eMYSMYExz40ah9thbWvFUn.html
Thanks for watching
Always makes me think of all the work our forefathers had to put into clearing farm land. They only had strong backs and hand tools, possibly a team of pulling horses to help. Makes me grateful for all their hard work to make this great country.
Yup, wish everyone could appreciate and be grateful for the ones who came before us and paved the way. We are all standing on the shoulders of giants!
They had dynamite, Bill. Dynamite
Lol "forefathers." Now I know why you all want to ban books.
@@michaelayeni177 who said I want to ban books? Your comment makes no sense.
@@lonewolfFirearms They want to ban books to remove history. History which can tell you who those "forefathers" who cleared the land were.
Tree stumps really are amazing structures. It’s a lot more fun watching other people fight with them. Your grandson always tickles me, and seeing him going at it back there I sincerely look forward to your content in 10 years when he’s getting one piece of equipment mastered after another. He’s got a priceless childhood happening right now. It will serve him well in life.
The BEST way to remove a root ball (stump) is not to cut the tree down. The tree's trunk makes an EXCELLENT lever for prying the root ball out of the ground. I'm not sure what kind of tree that one is, but I've pulled out a maple about that size using a mini-excavator by digging out the roots in front and behind (relative to the direction I wanted it to fall) and then reaching up with the excavator and pushing it over.
Yes, indeed. Using the enhance bending moment, cantilever fashion,over the thicker length of the trunk and apply a steady pull in the direction you want it to fall. Whilst it’s not imperative to remove the canopy, which can be used to increase the bending moment, it is deemed safer to do so to minimise risk of instability as tree tilts. Earth around base should also be loosened the assist root extraction during the induced toppling manoeuvre. Have seen this method successfully employed over 70 years ago . On a tree this size a 20ft lever effect could have been easily achieved.
I've already commented on this but he is a marketer who knows physics but would rather avoid solving the problem with physics and put on his Mighty Mouse costume.
I have difficulty watching stupid people who believe that they are smarter than the laws of nature.
I'm thinking that I will cataguized this guy under humor "stupid human tricks "
As opposed to an intellectually minded channel.
I admire your persistence and tenacity. As you alluded too, you experimented and learned a valuable lesson.
Tremendous amount of respect and admiration to our farmers. Jack's of all trades and some of the hardest working, selfless and under appreciated people. May God bless the farmers and their loved ones!
Excellent work. You demonstrated multiple types of strategies on a very difficult project.
Very satisfying watching you get that stump out! A little determination and patience go a long way. Maybe not the most efficient way, but you did clear out the hole and that will pay off in the long run. I enjoyed this video.
Of all the things I've done with my 1025R and 260B backhoe, digging out large stumps has been the most un-gratifying and disappointing. Watching you pick at that stump brought back some bad memories - but I admit, seeing the sped-up video is encouraging to just keep picking at it. It may be hard to see the progress in real-time, but all that little picking adds up, as the sped-up video shows very well. Thanks for sharing again, Brock.
I almost stood up and cheered when you finaly raised that stump above the skid steer lol !!
Thanks for the heads up on " Stump Stories."
pc
💥 Doesn’t matter if it was the best way. It was the most fun way for sure! Nice job Brock!
*Keep on tractoring!*
"An auger bit with some dynamite for this stump from hell----!"Great job Rockhill Farm.
Bro, that stump gave you more problems coming out than some wisdom teeth I've removed. Your persistence paid off, as did having a variety of the proper tools.
FIRST TIME watcher here. After almost 38+ years working for Deere I want to thank you for feeding me and mine! 👍
Welcome to the channel and Thanks for watching. I have mostly Deere equipment. I have a newer 2038R, a 1941 model A, 325g track loader, 2 stand on mowers, and an old hay wagon for Deere
Hey Brock. Well. When I suggested digging it out I did mention packing a lunch. 😊 But at least doing it this way the stump is gone and you'll not have to deal with it again. I actually took out one almost that size with a John Deere 2305. It took me a couple of days but it was well worth it. What I started doing after that was tying the tree off as high as possible with a block and tackle, digging around them and breaking as many roots as possible and pulling the whole tree over and used the weight of the tree to pull the stump out of the ground all in one shot. It worked really well and saved a lot of work. God bless you and your family and God bless America! P.S. There's no doubt about who your grandson's best buddy is. 😊😊👍
Stumps are a pain, but when you're all done getting rid of them it feels soooo good! And you certainly do have some dry dirt!
I really enjoyed watching you cut up this tree and dig out the stump I think it is awesome I really enjoyed it keep on doing what you’re doing and I’ll keep on watching you
Thank you
I was just amazed how much work you had to put into thi what a awesome job you did!
Man that was one stubborn tree. I’m glad you were able to get it out. Hopefully that will be the last hiccup for the wood yard.
Thanks for the video.
What a beautiful journey of a man and tools With great passion for the craft of work. Thank you
i gotta tell ya! you did some great work! wow...big big massive stump work! i think we can all say, we learned so so much from your efforts, that we might not have ever known!
Ata Boy Brock! Never give up.
Having done this myself...I knew it was going to be a good deal of work no matter the method.
half of doing stuff like that is the fun, playing around, moving and busting stuff........life is good !!!
Well said
You are truly a very hard working man God bless you 👍🙏
One of the most satisfying things I've watched in quite awhile, Brock. Congrats on the victory! 😄
Easy to see why old timers used tnt before heavy machinery. Good battle and victory with the stump.
Thanks
The trick to burning out a stump is 1) Drill a reasonably big hole from the top. Use something like a 2" carbide tipped Forstner bit. This needs to go down to grade, or better yet, below grade so an extension is required. 2) Drill an intersecting hole from the side at or below grade. Start a fire near the intersection. Add some charcoal to get it going good. Once it is going get a fan/leaf blower to blow in the side hole. You won't be able to run the fan 24/7, but the longer it runs, the better.
Agree. What I've noticed in all of the "let's burn the stump out" videos, is that they light a fire on top and expect it to burn straight down into the stump and remove it that way. Fire doesn't work that way.
Expanding on your idea, fill the 2" vertical drill hole with charcoal (broken up if need be), and drill 2 diagonally intersecting holes 90 degrees apart. Then light a road flare and shove it into one of the diagonally intersecting holes. The flare will light the coals deep inside and the other hole will provide air. Then just let it smolder. The radiant heat from the inside will burn it from the inside out.
Thanks for the videos, great to be able to follow the whole process. Take care and God bless.
Heck of a good time watching you. 👍
Thanks
As a bonus, you dug up some really good rocks.
I am in the middle of a voluntary project, clearing some land. So far I have removed over 30 stumps by digging 5 feet underneath each side of them with a JCB 3cx, then lifting and wobbling the things out. Yesterday for a change I had a 6 year old stump which just fell apart when I got the backhoe on it. I would like to try the burning out method, which I think would work well on a dry stump. The usual method is to scoop some wood out of the middle of the stump. Then cut an air hole, on the upwind side, as low as possible... Best of luck from N Wales...
Put that stump in your pond. The fish will love it.
Hey Brock, as you probably know by now, it’s the two thirds rule for trees.
What you see above ground, there’s usually about two thirds of all that mass below ground.
Great video, mate! 🙏
Roots and rocks. Rocks and roots. Victory!!!
It ain't no step for a stepper...Way to go Brock!!!
I agree with the observation made by another person; the video quality looks better (HD)!
Broke your commitment to your channel/viewers goes Above & Beyond!
thx, tommy
Thanks
Thanks for the videos I have a large stump, after watching how much trouble it was burning , I will use my small backhoe to dig it out , I will be buying a stump grinder in the future.
Thanks again.
Firstly, good on you for your tenacity! Here is my 2 cents. My property is an ex Christmas tree farm with mostly doug fir trees that have matured to about 60 feet. I am constantly thinning and clearing. I have tried every short cut method possible and here is what I've learned. Stump grinder; effective and looks great when finished but the rest of the stump dies years later and leaves a big hole. Burning; ineffective and just makes an ongoing mess. Tree toppling; pushing the tree over with the tractor (3320) is effective if the root ball is diseased. Look for mushrooms around the base. It's a dead giveaway. Digging out; this is the last resort and most time consuming. But if you must, find and cut the main perimeter roots and try pushing the tree while it is intact. Use the leverage of it's own weight. If that fails, cut the tree about 8 above the ground. Dig and find the main perimeter roots and break them. Once the main roots are broken the tap root will be all that is left. Sometimes it will give you the most trouble because it is the hardest to access. Pick away to loosen the soil near the tap root. Once that's done start rocking the trunk. At this point it will come out fairly easily. I carry the stumps to a burn pile and light them off in the winter. No more stumps!
That backhoe is cute, seriously good video.
Wow, what a stump, nice job getting it out Brock.👍🏻
Thanks
Way to stay with, I kept trying to tell you to "go get the stump puller!!!!" But I don't have a mic on my computer, and it doesn't have a flux capacitor so I don't think you could hear me a day or to ago when you were out there..... LOL Now make a playlist of this "adventure" and anytime someone suggests "burning" a stump out, just send them to the playlist, then you can grind the stump out (or dig it out if you need everything below grade gone as well). Have a great weekend!!!
Tree stumps are hardest thing to get rid of but u did it ..good job. I have fought a few of them to the end too.
if you ever end up burning another out you should try dig down next to it and making an air channel through it and injecting air with a leaf blower so it burns hotter from the center out same principle as melting metal in a furnace.
That really leads me to respect the men who had to do that with an axe, pick, and shovel before machines.
One way they used to do it is with a couple of wagon wheels mounted on a very thick axle. You fasten a long pole to the axle with a short end by the stump, and the long end roped to a team of horses. You chain the short end to the stump with the pole vertical. When the horses pull, you have 10:1 leverage pulling the stump up. If the ground is wet and you have cut off some of the roots some distance away, the stump will pull out.
I dug out a stump that big with an axe, hand saw, a shovel and a chain saw. It took the entire summer and I eventually got down to the tap root. In the process I dug a hole you could park a VW in below the lawn level. It was the most fun I ever had working around my house.
That is a lot of work
You can eat an elephant one bite at a time. @@RockhillfarmYT
Love your determination!
Who knew what the best way is but I enjoyed it tremendously Great video
Thanks
Cool video. Stay safe out there.
Crazy huh, I would have thought it would have popped out also. Well it's done . I knew it would take forever burning it . Also it makes the stump harder by burning . It changes the sugars in the wood . I think you could make a screen and never have to buy gravel again with all the rocks u have lol . Good job and take care . Todd
OK maybe burning it wasn't the best option... it has me STUMPED! :D Even digging it out that stump put up quite a fight! Definitely satisfying to see you victorious. On to the next challenge lol Thanks for sharing Brock!
I have a 12,400 lb excavator. I dig 3/4 round the tree leaving the side I'm going to fell the tree towards. Then I push it over and cut the tree off on the ground. Unless I absolutely have to I'll never cut a tree first then dig the stump.
You finally got it done!
Yes sir
For future reference, you drill a hole in the top of the stump. Pour oil in the hole. light the oil in the hole. Tie some corrugated metal around the stump. Leave it alone for a few days. It will burn-out completely from the inside-out. Looking forward to seeing the next one work.
Just discovered this channel, it's awesome. I guess the moral of the story is, if you want to have a couple days of macho fun, burn it. If you want it out fast grind it.
Exactly
Thanks for watching
I have had stumps that put up a fight. You da man!
You have a lot of nice toys
Nice work, that sure was a tough job.
Enjoyed watchinig it - learned a lot! May never need to use your techniques, but who knows?
Very good Information. 👍
Nature wants to live. I'm working on my own stump and it is kicking my butt. Great project though.
Drill a 1-2" hole down into the center of the stump. Stuff it with black powder except the top foot or so. Stuff the top foot or so with dryish clay around the fuse and tamp it down. Light it and move away.
Epic Trilogy 👍
Your determination is unmatched. Good work man!
this was great. thank you for doing this. this was an eye opener. I knew it would be hard. very hard, but i underestimated the difficulty by far. Every step was sort of a fail, but you kept with it to show us. No wonder so many stumps are left behind. I suspect that the only easy way would be with a 35T+ excavator (not a low cost option).
Fantastic job digging that monster out. I couldn't help but notice bleed down on your backhoe. You may have a very small leak in the system. I have a Kubota about the same size as your tractor and I know how long it takes to dig stumps. Great job Brother.
Thanks
The *new* basement project is coming along well I see.... LOL -- I'm actually enjoying this stump project Brock. Nice job! --J.Andre.
Thanks
@@RockhillfarmYT -- and more importantly, congrats on getting over 20k subs!
just watched this again and was thinking it's about time to dig out a few more stumps. I must admit it is a lot of fun and a challenge on some of those things. Sorry I didn't get yo see you this year at the show in Louisville.
That tree puller is not going to be one of those implements that is forgotten in the back of the shed.
I used water (a garden hose), a chain saw, an ax and a shovel. Went fairly quickly.. Dug around the stump as far as I could. Washed the stump off to get rid of the sand as much as possible. And cut below the surface with the chain saw (and did some chopping with an ax). It took a while but was not that bad of an approach. Most of the stump is still there but below the surface of the ground.
Whole lot of work getting that thing out. Very deceptive of how much root was still left after the burn, the more you dug, the more roots appeared really showing how ineffective burning roots out is. Bet it feels good having that done. Looking forward to your future videos.
Nothing beats a Deere-except for burned out tree stumps
Well you got it finally lol. Definitely got a couple hours of work in it.
Great video….I enjoy it
Wow, who would imagine you would have so much trouble with one task. However, you could put these videos in a playlist and call it "I'm Stumped" 🤣🤣🤣
foundation for the new house mostly dug now 😀😀😀😀
Exactly
Yahoo the stump is out. After looking at the video it makes me wonder if you could have dug around the stump first and then set fire to it, the stump may have burnt better that way, I don't know, just a thought. Thank you and keep the videos coming.
Thanks for the comparrison of the removal methods. I dont have gear to dig a stump out or grind it, looking at hte effort I would likely rent a stump grinder if I ever need to remove one. IMO the fire was not as effectivte as it could have been because how low the stump was in the fire. Root balls are dense and likely wet wood where it was green wood, if you wanted to burn it ouf quickly I think you would of had to dig it out so the top of the stump is at the top of the fire not on the bottom to get more heat and oxygen. So to burn it out you would need to do 75% ore more of the digging then burn it and thats 2-5x the labor and time of just grinding it.
drill 20 holes and use sulphuric acid...wait 3 weeks and it comes apart easy. I did a 120yo 140 in stump tree in a front yard in Vancouver with a circular saw and acid and a pressure washer.
Allrighty then. Got her done.
“That Power Wheel doesn’t have the deluxe towing package” 😂
Great job man, after you get stump out I would push the little green tractor in the hole .
That little green tractor is an amazing machine
It just isn’t designed for digging out stumps this side
@@RockhillfarmYT I know just joking great video
Dynamite!!! Boom gone!
I'm really good at spending other people's money, so my solution is that you need to go buy a John Deere 60G to use for stumps and other projects. Who doesn't need a mini-excavator around the house? 😁
If you know in advance that you will be removing the stump it’s much easier to dig beside the stump on all sides then pull the tree over with the stump still attached so the weight of the tree helps to remove the stump
YEA! you did it.
You should have used the grinder on it. If you dig it out, it takes longer, and what are you going to do with the stump?
Great stuff! Now just stop for a minute and think about our grand fathers who had to take out thousand of those stumps so that they could have land to farm! No hydrolic tractors back then, just horse and lots of hard work! I can't imagine the painfull days it certainly was.
Definitely
I took out the (smaller than yours - 120' high, but only 20" dia) eucalyptus stumps (with a larger - MF 3165 - backhoe) by digging around them and then pushing the tree over uncut, letting gravity pop the stump up. Some of the surrounding roots I had to "eat through" with the bucket teeth and some I had to follow out far enough that the bucket would finally break them. Also I dug around them with a "U" shaped hole (with the top of the "U" in the direction I wanted them fall) so that the back roots (which would hold the stump in tension) would have been (mostly) cut and ones in the direction of fall would just bend over. Additionally, my soil is pure sand (for over 400' down), so what works for me may very well not work for you.
1:17
Grandson ? ? ?
Did you start procreating at age 12 ? ? ?
I am a few weeks from having a 4' diameter mango tree cut down.
Burning is my only option for stump removal.
My plan after watching all THREE clips?
A few bags of charcoal at the base, a blower, a chair, beer, and repeat every Saturday until it's gone.
Thanks a lot.
What I learned is....
Big fire is overrated.
Blowers is underrated.
There is no FAST way.
Finally...... You are my new "man toy" hero.
Thanks for the clip.
Thanks for watching
Yes you let the smoke out for sure I get it wow
I recommend using a GBU 47.
I know you didn't do this experiment because you felt you needed to.
That said, this gives great credence to the proverb; "Sometimes it easier to plow around the stumps..."
It's truly amazing just how extensive and strong those big tree root systems are..
Yeah, everything is a learning experience and sometimes I do something stupid with an audience.
Thanks for watching though
@@RockhillfarmYT Don't get me wrong. I really enjoyed it and appreciate the effort. That stump (after all the burning even) is massive.
Thanks
Good stuff Brock. Like you said, this was a living tree so the stump is full of sap not letting it burn very well. I was amazed when that last big chunk popped loose, that attachment is a beast!
Did you upgrade your camera? The last few videos look more HD
Yes. I knocked my tripod over about three videos And busted the screen
So I had to go get a new camera
I have had good luck with fire and leaf blower. Blast furnace burn out.
I know you must feel good that it's out b/c I felt relief when it came out. How much longer do you think it would of took to finish burning it? I do like your content of trying different things. It shows me how to do something or how not to do something.
"So then I cut in a one lane road to the bottom of the stump."
Thanks for trying out new things for the benefit of your audience.
Thanks
Thanks for your effort. Based on the sequence of events, I think it shows that cutting of the stump above grade and the burning effort, was a waste of time. Digging it out was more practical. So, I thank you for an excellent video. I learned a lot from the video. Isaiah 55:6. O.
Thanks
It's difficult to get under the stump with the backhoe. We have really soft ground here, no rocks larger than a baseball. Once I dug down about 4 feet all around the stump I was able to start shaking it loose. Oaks have a million small roots but no big tap root like pines do.
You're a grandfather? My guess would be 35-40. Lookin good. My wife agrees
I’m 42 and my stepdaughters were eight and nine years old when I met them.
I have five kids and five grandkids
About 20 years ago I had on my land rwo trees, a little smaller than yours I think but big. I cut them down to the ground and burned them for three days and nights and then they were both gone. I put as you a lot of wood on and the fire got after a while also to the roots under the ground.