I didnt see him switch back on the antenna safety switch. (Thats another trip up the mast). Also I would have used a bench power supply to check correct operation of both cooling fans at the transmitter head. Good Video.
Ka-lecky,, perform radar self-test to determine what is the problem.. just go to menu option.. we replace magnetron normally due to 4000hrs trasmit time..
Wala kami asst. Elect.. kadalasan po ay sa cruise ship may mga asssitant. Pero pag sa cargo ay solo elect ka po. Yung kasama ko po ay AB. Pag sa deck po ang work area ay pwede ka manghingi ng assistant sa mga tropa natin sa deck.. tulad po ng radar. Hindi po pwede mag-isa lang dahil working aloft po yan or meaning mataas kya kailangan may kasama ka for safety na rin.. Mag subscribe din po kayo sa channel ni AB. "Katoto brothers"
the new Magnetron cable is too Long it should be made shorter, it's better to use other way than soldering, and the TX time is over 6000hrs it shouldn't be considered as still useable
Hello sir.thank you for your comment. As per makers maintenance manual of Radar. The transmit time before replacement of magnetron, X-band = 4000hrs and for S-Band= 7000hrs
Order lang yan dito sa electrical stores. Bale sa IMPA lang kami nag oorder then kung ano lang ang dumating na supply.unless kung more specific ang order mo Sir.
![[UA] Team Vitality проти NAVI | IEM Cologne 2024](http://i.ytimg.com/vi/wttO1zVRTC0/mqdefault.jpg)
Thanks Amigo, Can see practically as demonstrating, but would be good if use English to understand non-Filipino. God Bless
It was very good video please make it en english it will more help full thanks.
Cables from new magnetron you should cut to make shorter. this is official advice from furuno service. cables should be as short as possible.
agree
I didnt see him switch back on the antenna safety switch. (Thats another trip up the mast). Also I would have used a bench power supply to check correct operation of both cooling fans at the transmitter head. Good Video.
x-BAND = weather
Excellent video and good job. Thank you!
Thank you sir for your positive feedback..
Thank u elec ..malaking tulong 👌
Thank you po maam/sir. Madami pa po tyo content hindi pa lang po na edit. Please like and subscribe to my channel.God bless po
Ingat kayo dyan ka Lecky n ka toto uuwi pa tau hahaha
thanks
Maraming salamat sa pag-post mo ng video. . paano nyo po na detemine ang sira nun nag troubleshoot kayo?
Ka-lecky,, perform radar self-test to determine what is the problem.. just go to menu option.. we replace magnetron normally due to 4000hrs trasmit time..
How to reset running hours on this radar ?
Good job bro,🇮🇩👍
Thank you so much 😀
isn't S-band for long-range?
Lek louie based on exp di na po pinapalitan ung On time kasi yan ang total r.h at jan mallman ung rh ng motor ntin only tX OR TRANSMISSION TIME
tama ka sir..total R.H. at hindi na kailangang palitan pero un ang instruction nila kya po nilagyan na lang namin ng label.. thanx
Asisstant electrician mo po ba siya sir?
Wala kami asst. Elect.. kadalasan po ay sa cruise ship may mga asssitant. Pero pag sa cargo ay solo elect ka po. Yung kasama ko po ay AB. Pag sa deck po ang work area ay pwede ka manghingi ng assistant sa mga tropa natin sa deck.. tulad po ng radar. Hindi po pwede mag-isa lang dahil working aloft po yan or meaning mataas kya kailangan may kasama ka for safety na rin..
Mag subscribe din po kayo sa channel ni AB. "Katoto brothers"
the new Magnetron cable is too Long it should be made shorter, it's better to use other way than soldering, and the TX time is over 6000hrs it shouldn't be considered as still useable
Good day when magnetron can be replaced ?
as per maintenance manual.. 4000hrs transmit time
How to reset running hours on this radar
Press HL button and keep it press.. then press MENU button 5-times then in display menu, click to edit the transmit time
are you Second or Electrician ?
How long for use the magnetron ?
Hello sir.thank you for your comment. As per makers maintenance manual of Radar. The transmit time before replacement of magnetron, X-band = 4000hrs and for S-Band= 7000hrs
Anung model yan sir?
Good day sir ask ko lang san mo po nabili lalagyan mo ng tools mo?
Order lang yan dito sa electrical stores. Bale sa IMPA lang kami nag oorder then kung ano lang ang dumating na supply.unless kung more specific ang order mo Sir.
Thanks sir ganda kasi mas handy dalhin at naka organise na pag mag trouble shoot
Please subscribe sir.thank you
Can you make videos in English 🙂
Thank you for your comment sir.we'll try sir.
pls speak english
Thank you sir. i will try to put subtitle and speak in english in my next vlog. Please subscribe to my channel
@@leckylouiesubscribed.