Only thing I’d say negative about using them is the lever. I get around it though by tightening the screw on the head of the clipper every time I change the lever level
Would do recommend the CHJ trimmers with the stock blades?, I know people are modding them with Wahl blades but it would be quite costly to do it where I am since you need the white plastic part that goes inside and that alone is 10€ plus shipping.
Christian, go to AliExpress, and search for 8101 replacement blades, these come in silver and gold and come with the white plastic piece, it's called the cam follower. I use them right now and they're just as sharp as the original Wahl blades. Trust me, you won't regret.
Hey man . I wouldn't rate them as good as Magic clips and they get warm after some use. However they are worth the money. My favourite trimmer by Kemei is the km-5026 . The red one. It's super light weight and hits hard! You can also put a Wahl blade on it without buzzing loud or having to change the cam follower. 👍
Was the lever good or did it have a mind of its own I had a pair of Chinese clippers in the past and the lever is no good I have to hold it down while cutting
Nice Vid! What guards do you use for the Kemei 2600? I see some China professional metal clip guards for $8-$10 8pcs & wondering how well they work & if they will fit the Kemei with a Wahl staggered tooth crunch blade on..
@@chrisjoneslondonuk1399 Hey thanks for the reply I appreciate it. Okay I see nice so, those red ones from China they work well on the Kemei? I don't want to spend another $30 for a 8pcs set of the original Wahl metal clip guards
@@Man_eee yeah bro. No need to spend that much!. The black or red ones work just fine. Also if you're unaware check out the site called aliexpress. They sell loads of Chinese/abroad barber stuff for a lot less than the big brands. 👍
@@chrisjoneslondonuk1399 That's great to hear man. Yeah i've been shopping on aliexpress for years now But I was just a bit skeptical ordering barber stuff from china since i'v always bought the best from the big brands. But seeing your video & others I see it's definitely worth the $ plus I don't cut hair anymore only my own so yea this sounds perfect for me. Thanks again man you've been very helpful.
great cut and tutorial thank you.
Gracias
You did the best review on kemei clip
I appreciate that . Thank you. 👊
You welcome
Definitely!
Only thing I’d say negative about using them is the lever. I get around it though by tightening the screw on the head of the clipper every time I change the lever level
That's true. I do the same 👍
I want a full bald haircut, what's the best cordless clipper or trimmer to use please? I want to get as short as possible without the foils.
Hi. I recommend the Wahl Cordless detailer. Or Andis cordless super liner. 👍
Nice cut
Cheers buddy!
😃😃😃😃😃😃😃
Where can I find the chi pro detailers? If you can post a Link that will be appreciated
If you do the C motion would it cut your skin up
No. Only reason you'd cut skin is if your bottom blade is over lapping the top blade. Make sure to service clippers often if you're cutting skin.
Would do recommend the CHJ trimmers with the stock blades?, I know people are modding them with Wahl blades but it would be quite costly to do it where I am since you need the white plastic part that goes inside and that alone is 10€ plus shipping.
Yes the original blades are fine.
Awesome, thanks!
Christian, go to AliExpress, and search for 8101 replacement blades, these come in silver and gold and come with the white plastic piece, it's called the cam follower. I use them right now and they're just as sharp as the original Wahl blades. Trust me, you won't regret.
@@aad296 Thanks for the Info Addi!👍💈
@@aad296 You're the best man! Everyone go follow this guy and subscribe to his channel. Support for support! ❤💯
Good video man. You reccomend these clippers and are they the same as magic clips. Also any advice on a trimmer you would recommend by kemei ?
Hey man . I wouldn't rate them as good as Magic clips and they get warm after some use. However they are worth the money.
My favourite trimmer by Kemei is the km-5026 . The red one. It's super light weight and hits hard! You can also put a Wahl blade on it without buzzing loud or having to change the cam follower. 👍
How are the kemei holding up? Do you currently prefer the wahl magic clippers or the kemei 2600? Thanks
Wahl Magic Clip defo 💯
Hello just received my Kemei 2600 clipper. Does the clipper only take like an hour to charge??
Was the lever good or did it have a mind of its own I had a pair of Chinese clippers in the past and the lever is no good I have to hold it down while cutting
I know what you mean man. About the levers on those cheap clippers. No this lever is all good dude, working fine! 👍
you just have to screw the screw more in and then it'll stay in place
Can you zero gap the kemei if you want to?
Yes.
Ca.n u swap this blade with a wahl cordless senior blade??
Yes. I've now swapped for my balding blade. Check out my videos on that. 👍
How good is the battery of Kemei ?
Very good. As good as Wahl!
Thanks bro i have been wandering about the battery and the you cut this guys was so perfect
Did u replace the kemei blade with the wahl blade?or just using the genuine parts?
All genuine.
@@chrisjoneslondonuk1399 how about kemei trimmer,does it good?
Are the Kemei 809A any good for skin fading?
As the video buddy
Can someone post a video of using the kemei 2850
What's the model of the kemie you're using?
It's the 2600
Does the super taper chargers work on the kemei km 2600
Through testing I'd say No. 👍
Are they still working good ?
They're still good! 👍
Chris Jones London UK thank you brother
Com fé em Jeová vou comprar a minha.
How are they working so far ?
Hi buddy. They're all good so far however I do find they heat up after some use. So maybe not for top professional use.
How is this for cutting a fade at home once a week, will it last?
Yes. I'm still using it 2 years later
Do you have any links or information on where to buy these clippers and trimmer?
Aliexpress
Nice Vid! What guards do you use for the Kemei 2600? I see some China professional metal clip guards for $8-$10 8pcs & wondering how well they work & if they will fit the Kemei with a Wahl staggered tooth crunch blade on..
Hi buddy. I use my standard normal wahl gaurds . Yes I've seen those Chinese metal clips. I'm currently using the red ones. 1.5 and 0.5 guards 👍
@@chrisjoneslondonuk1399 Hey thanks for the reply I appreciate it. Okay I see nice so, those red ones from China they work well on the Kemei? I don't want to spend another $30 for a 8pcs set of the original Wahl metal clip guards
@@Man_eee yeah bro. No need to spend that much!. The black or red ones work just fine. Also if you're unaware check out the site called aliexpress. They sell loads of Chinese/abroad barber stuff for a lot less than the big brands. 👍
@@chrisjoneslondonuk1399 That's great to hear man. Yeah i've been shopping on aliexpress for years now But I was just a bit skeptical ordering barber stuff from china since i'v always bought the best from the big brands. But seeing your video & others I see it's definitely worth the $ plus I don't cut hair anymore only my own so yea this sounds perfect for me. Thanks again man you've been very helpful.
Tông đơ mạnh khỏe ghê
the question is : how much time gonna take this fake clippers to die .. not talking about battery life.. im talking about motor
Been using them almost 2 years now. No problems.