How to install Smartmoto manual radiator fan switch | Husqvarna 701 | KTM 690
Вставка
- Опубліковано 14 лип 2024
- Here's my video on how to install the Smartmoto manual radiator fan switch! Nice and easy this one, should only take you a few minutes to complete. Big thank you to Smartmoto Electronics for sending this kit out to me!!
You can purchase the switch from Smartmoto's website below
smartmoto-electronics.com/coo...
This switch fits many bikes such as...
Husqvarna 701
Suzuki V-Strom 1000 2002 - 2012
Suzuki V-Strom 650 2004 - 2011
Suzuki GSXR 1000 2001 - 2004
Suzuki Hayabusa GSX1300R 1999 - 2007
KTM 1190 RC8 2008 - 2015
KTM 690 Duke / Duke R 2008 - 2020
KTM 690 Enduro / Enduro R 2008 - 2020
KTM 690 SM/SMR/SMC 2007 - 2020
KTM 950 Adventure 2003 - 2006
Kawasaki KLR 650 2008 - 2018
Kawasaki KLV 1000 2004 - 2006
Kawasaki Z1000 2003 - 2006
Kawasaki Z750 2004 - 2006
And many more which are listed on the link above!!
Check out their UA-cam channel too for guides and information on their products!
/ @smartmotoelectronics
#PlugAndPlayPerformance #smartmotoelectronics #smartmoto
Remember - Hit like and subscribe! Thanks!!
See more from me on my Instagram page!!
/ twedymoto - Авто та транспорт
The thermostat is normally contact open, so save yourself some money (+$80) and just solder ANY switch ($10) parallel onto the wires!
Can't fault Smartmoto, thanks to you reviewing their stuff I got myself some bits for my 701 and I'm pretty impressed, fast delivery, super simple to install and works great! :)
Thanks dude. So easy to install. Took me a good 10 minutes to work out I was trying to plug one end in upside down though 🤣🙄
Sweet! Hopefully they will ship me one to Canada!
They should do pal! Or they might have a dealer in your region :)
They need this for the 890 901
The thermostat is normally contact open, so save yourself some money (+$80) and just solder ANY switch ($10) parallel onto the wires!
How do you go about covering up your air filter when you wash the bike?
Also do you have to worry about the power commander plugs when washing?
Cheers
To be honest, i only ever really jet washed the lower parts of the bike like the wheels, engine and under the fenders and if I did jet wash around the filter then it would only be for a second. The Power commander plugs have seals in them. Never had an issue in 3 years with the plugs :)
Thanks Twedymoto again. Cheeky question here, do you know if the cast wheels from a KTM Duke 690 will fit our 701s?
Quite a lot have swapped the wheels from a Duke to the 701. I think you just need to use the standard 701 wheel spacers.
@Twedymoto hi sir, did u experienced some shifting problems? i heard of some sort of false neutrals problems between 5 and 6 gear in particular, what are ur toughts on that situation? ty
This LC4 engine has suffered false neutrals for a lonnnng time! If you're positive with your shifting (be firm) then you'll never have an issue. There are kits available to reduce falses but unsure how good they are. Lots of info on the 701 Facebook groups and advrider. 👍
@@Twedymoto ok ty. i saw u mounted the oberon clutch slave. does it solve definitively the friction probelm? does it last longer then the stock one?
How did you mount the actual toggle switch to the handlebar? Ive ordered one for my gsxr 750 but cant figure it out hahahaha
To put it on a handlebar, you could take the crude approach and use a P clip around the bar amd use the little nut on the switch to close the clip. Not sure how else to do it
if the switch is off, the fan turns on normally?
Correct. It operates as normal.
Tanks
The thermostat is normally contact open, so save yourself some money (+$80) and just solder ANY switch ($10) parallel onto the wires!