Lectric Service Center | Lectric Lock Installation and Use
Вставка
- Опубліковано 27 лис 2023
- Did you just receive your Lectric Lock and need some help on the installation or use of it? Watch this video to help you through the process! #lectricebikes #servicecenter #ebike #accessories
Get your Lectric Lock here: lectricebikes.com/collections...
I wish every product had helpful videos like this. Great designing with the bike lock placement, descreet and completely out of the way.
👍👍👍
The video was a great help in installing the lock on our XP 3.0s.
We have the XP light. How does the lock case attach?
We attached where you show, but you can’t secure with the strap, the Fender Bracket is in the way!
I understand you’re a green Company.
But directions would have been nice!
We don’t have service where we are. Very disappointed.
The front fender, was so tweaked it was rubbing the Tire. We bent the bracket, seems ok.
I understand green Co. but I spent green, buying this!
2 trips to town, for internet, just to assemble is crazy!
What are the velcro straps for?
How strong is this lock? Thinking of buying it, I just want to be sure it's secure and durable.
This video was helpful BUT I’d love to know how to use this lock when you don’t have a point to lock it to… I read you can just lock the tires up but that was confusing 🤷♀️
Hey there! If you do not have any mounting points for the bike lock, the lock itself does come with two velcro straps that you are able to use to mount anywhere on your bike.
The included screws are too short to mount the lock holder on my XPEAK High Step?
Hey there! We're sorry to hear about that. Please give our team a call at 602.715.0907 during business hours and we'd be happy to provide you with the appropriate screws.
Thanks for the video. What are the Velcro straps for?
It pays to watch and actually listen. He clearly stated the reason in the video😂
About the velcro
Has anyone figured out how to do this on the XP lite. There is almost no room to use the allen key.
Check out the XP Lite bike lock installation here: drive.google.com/file/d/1yCyI4cIjwRlI7Hb8AH8T6lXjCw-krPlZ/view?pli=1
@@LectriceBikesThanks! I did get it installed eventually. I did'nt think about taking the seat off. I found that taking the rear light off made it a bit more accessible.
@@LectriceBikes My issue is the lock gets jammed on the seat clamp why trying to slide it out, and with the fender kit installed there's not enough room to get your fingers past the mounting plate on the fender, you have to fish the rubber strap onto the holding nub. I was going to add washers under the top of the mounting bracket for the lock to clear the seat clamp, but then that would make the issue with clearance on the fender bracket worse. Going to have to mount somewhere else.
This is nearly effing impossible on the xp 3.0 ! There is no room to turn the Allen wrench and the screws keep falling out!!
Hey there! We're sorry to hear about that. If you're needing more help, please feel free to reach out to our team. Thank you.
I had the same problem - I felt the supplied key was too long. I ran the screw in and out a few times before placing the holder & used a shorter Allen key to give my gnome-like hands a chance to get in there! You could cut 1/8" - 1/4" off the supplied key to make some room...
What can you do if you get a error code when you turn the bike on ?
Hey there! If you're experiencing any error codes, please give our Tech Support a call at 602.715.0907 M - F from 9am to 5pm MST as they will be able to assist you properly. Thank you.
The process IS NOT the same on the XP Lite! There's zero room to get a tool in. Once in, the elastic won't secure with fender installed. Should have just recommended use of straps for XP Lite. 😡
Thank you for this feedback, the holster installation can be rather tight with the Lite model, we apologize for this inconvenience.
@@LectriceBikes Very bad design! At least show how to install it with the straps! I never seen straps like that before. Totally useless for the XP 3.0
Hey there! Thank you for your feedback and recommendation, we'll share it with our team. ⚡️
The rear fender kills any chance to use this mount point on the XP Lite, especially the lock because the rubber strap can't fit due to the rear fender bracket being too big and sticking out. I'll try the Velcro on the lift handle and hopefully that'll work. The front light blocks the front mount point so that's out of the question too. 3:15