ACDelco TechLine Connect Download and Installation without any errors.

Поділитися
Вставка
  • Опубліковано 19 вер 2021
  • This tutorial is an attempt to help you to avoid any errors that might accompany the installation of Techline Connect to your computer.
  • Авто та транспорт

КОМЕНТАРІ • 124

  • @mannygonzalez4309
    @mannygonzalez4309 2 роки тому +4

    Thank you for posting this saved me hours of frustration… 🙏

    • @DallasAutoDiag
      @DallasAutoDiag  2 роки тому

      My pleasure and good luck. Hopefully you won't have any errors while programing

  • @oscargomez5938
    @oscargomez5938 2 роки тому +2

    This video saved me hours of messing around with it on my own. Thanks for the upload!

  • @clutchin7017
    @clutchin7017 2 роки тому +1

    Thank you for this video got my first programming with TLC on Monday hope it goes good

  • @DresCarsandThings
    @DresCarsandThings 2 роки тому +1

    Thank you for the video…What a life saver, they don’t make it easy for aftermarket that’s for sure!!I really appreciate,,

  • @KenBadik
    @KenBadik Рік тому +1

    thanks for the tips saved me several hours screwing around thanks again

  • @salomonsuazo6786
    @salomonsuazo6786 2 роки тому

    Hello, I reprogrammed a Chevrolet Cruze Diesel 2014 ECU, a warning appears on the dashboard with the quality of the DEF fluid and they recommend doing a ECU reprogramming, I did it but the problem persists, what will happen if instead of selecting the REPROGRAMMING option I select the option SETUP?

  • @chrisdonner2910
    @chrisdonner2910 2 роки тому +1

    Very helpful, thank you!

  • @andrewhennerfeind9879
    @andrewhennerfeind9879 2 роки тому +1

    Thank you. You saved me wasting more time.

  • @greggdailey5928
    @greggdailey5928 Рік тому +1

    Thanks this video helped me. Appreciate this video

  • @abhijithvr8902
    @abhijithvr8902 2 роки тому

    I am trying to program BCM for XL7 2007 Model using Tech 2 (SPS2). But techline application not detecting the vehicle. I am using CANDi but it is also not showing in the VCI list. Please support.

  • @jayc7033
    @jayc7033 2 роки тому +4

    So you do not need a new user id and password to log into tech connect? Just the regular login on the acdelco website?

    • @DallasAutoDiag
      @DallasAutoDiag  2 роки тому +3

      Yes no need to new user and pass. Same old one.

  • @defenselocksmith4345
    @defenselocksmith4345 6 місяців тому

    Thank you, was wracking my brain.

  • @ebrahimsadeghi5883
    @ebrahimsadeghi5883 11 місяців тому +1

    Super helpful 🙏

  • @erickgruis106
    @erickgruis106 2 роки тому +1

    It's never enough for corporations to make garbage cars, they also have to make garbage software. Thanks for the video!

  • @johncole9798
    @johncole9798 Рік тому +1

    This video was very helpful setting up Techline, thank you for showing this process in long form. Question, my reasoning for setting up Techline is to attempt to program RCDLR to unlock keyless entry. One I got Techline setup I played around with trying to programing but did not see this update. The GM Service Bulletin(circa 2013) I found regarding adding keyless entry, says for GM Techs to call Techline support for calibrations. Can I call Techline support and g we t these calibrations even though I'm not a dealer?

  • @partoems9376
    @partoems9376 Рік тому +1

    Hello Dallas Auto, thanks for the video. It helped me a lot to get my setup ready here in Ghana. So does it mean before Techline connect can be downloaded there has to be an active subscription?

    • @DallasAutoDiag
      @DallasAutoDiag  Рік тому

      I'm not sure how acdelco setup things for overseas users.

  • @AdrianQuintero-x7o
    @AdrianQuintero-x7o 3 дні тому

    Greetings, do you know what happened with acdelcotds that no longer accepts subscription payments?

  • @nursenick06
    @nursenick06 Рік тому +2

    Thank you for doing this!
    I have 2 questions:
    1) What are the computer specs for the computers you installed this on (Windows version, 32 or 64 bit, processor, etc)? I have an older laptop that works and don’t want to go buy a new one if I don’t need to.
    2) Do I have to purchase the Techline Connect 1-year subscription (a little over $4000 on the AC Delco TDS page) to program my vehicle, or just the $45 SPS thing for a single vehicle?

    • @sufyansiddique3471
      @sufyansiddique3471 Рік тому

      i have better offer for you i can help you

    • @sufyansiddique3471
      @sufyansiddique3471 Рік тому +1

      you dont have to spend 4000 bucks every year okay i can help you get techline subscription annually cheaper

    • @nursenick06
      @nursenick06 Рік тому

      @@sufyansiddique3471 Thanks, but I got it all figured out.

    • @alexiaestrada8490
      @alexiaestrada8490 Рік тому

      If you don’t mind sharing, did you ever get an answer to your second question?

    • @nursenick06
      @nursenick06 Рік тому +3

      @@alexiaestrada8490 Not on this thread, but I did find the answer after a LOT of reading and watching videos and deducing from those. No, you do not have to purchase the full subscription. All you need is the individual VIN subscription for your vehicle, which is about $40 if I recall correctly, and this is good for 3 years. I used it to program a new instrument cluster and a new BCM for my 2015 Chevy 2500HD and it worked just fine. In regards to the first question, I did end up going and buying a new laptop that was a 64-bit and installing the Techline Connect software on it, and it worked great. Apparently it did not like my older 32-bit laptop at all. I hope this helps.

  • @patrickclaxton5272
    @patrickclaxton5272 2 роки тому +1

    Good tutorial, I was able to connect to TLC, I had to replace the BCM in my vehicle. When I get connected and select replace and reprogram. The only option that shows up is a Utility to Disable Electronic Column Lock.

    • @DallasAutoDiag
      @DallasAutoDiag  2 роки тому

      I think you are in setup section, not programing. See when you select BCM under tgat list of modules there is a sub menu for what you wanna do with each on.

  • @longhuynh5249
    @longhuynh5249 5 місяців тому +1

    Brilliant video

  • @ebrahimsadeghi5883
    @ebrahimsadeghi5883 11 місяців тому +1

    Which vci do you recommend for techlin connect .MDI.MDI2 or bosche

    • @DallasAutoDiag
      @DallasAutoDiag  11 місяців тому

      If you are not doing a newer cars tgen mdi1

  • @patsuddarth1093
    @patsuddarth1093 Рік тому

    Hey, I just downloaded my SPS subscription. However, when I try to add my vin to the subscription, it goes to the TLC Admin Console. I was able to install all those softwares, with the updates & Techline Connect. But, I can't add my vin, after clicking on view, in my subscription. It states I a subscription 1 available, but 0 is by active. Am I doing something wrong? Do I need to connect the nano to my van & laptop, as I try to add my vin, to the Vin subscriptions?

    • @DallasAutoDiag
      @DallasAutoDiag  Рік тому

      Yes, connect to the car and read vin. That's how you add vin

    • @patsuddarth1093
      @patsuddarth1093 Рік тому

      @@DallasAutoDiag oh ok, thank you. If I need more help, I'll let you know

  • @rshillbunch
    @rshillbunch 2 роки тому +1

    Have you uploaded other video? Having trouble getting techline to connect autel j2534

  • @Theyfwkayyyyyyy
    @Theyfwkayyyyyyy Рік тому +1

    all heroes dont wear capes!!

  • @mouhamedquran8933
    @mouhamedquran8933 Рік тому +1

    nice explanation

  • @drynachavarria8699
    @drynachavarria8699 Рік тому +1

    how do you get access to Techline connect, is there a website to purchase, do you have to work or opperate out of a dealer, ect?

    • @DallasAutoDiag
      @DallasAutoDiag  Рік тому

      No you don't have to ve working at a dealer to get tlc. I have a video coming soon on how to get it.

  • @jscons7424
    @jscons7424 2 роки тому +1

    I have a problem, whereby it cannot load the vin slot I have bought, it always tells me I have null vin slot, whereas I have bought subscription vin slot

    • @DallasAutoDiag
      @DallasAutoDiag  2 роки тому

      sorry for the late reply, I think you should contact acdelco themselves cuz your issue involves using your subscription.

  • @MrFilmir
    @MrFilmir 2 місяці тому +1

    Thanks for the video. My only problem is that when I click to start tech line it goes through the updates and as soon as that start, I get an error from windows stating that “the system administrator has set policies to prevent this installation”. Can anyone help me with this and did anyone else have this problem?

    • @DallasAutoDiag
      @DallasAutoDiag  2 місяці тому

      There is a little box on the left side on the same page of running tlc it say run as administrator. Click that and try it.

  • @cdsfleetrepairs
    @cdsfleetrepairs 2 роки тому +3

    You are a life saver, thank you

  • @eletrocardirecoes
    @eletrocardirecoes Місяць тому

    Não estou conseguindo entrar no site da acdelco tds, será que foi removido do ar? aparece mensagem de erro.

  • @user-ml9rq9ir1h
    @user-ml9rq9ir1h Рік тому

    Thank you very much for the video. Can I use this program to restore ACDelco e78 after a failed programming? Is it possible to find a shadow password in this program?

    • @DallasAutoDiag
      @DallasAutoDiag  Рік тому

      I don't think tlc is gonna help you in this case. You can try

  • @nikolaytroshin762
    @nikolaytroshin762 Рік тому

    Привет! Скажи пожалуйста, если я куплю подписку Service Programming System (SPS2)
    Includes 24 months access to program all modules for one vehicle (VIN), смогу делать обновление блоков для европейского/корейского VIN? Достаточно ли купить только SPS2 24 months или нужно еще Techline Connect for 1 years?

  • @azizfa22
    @azizfa22 2 роки тому +2

    Hi
    Thank lot.
    How can i connect my autel j2534 to techline connect ?

    • @DallasAutoDiag
      @DallasAutoDiag  2 роки тому

      After you launch TLC click on connect vehicle on the top right side with the vci icon. A device explorer window is going to pop up, bottom right side option says change device when clicked you get to chose your device as long as the drivers for it installed in your computer.

  • @iliyakrustev1241
    @iliyakrustev1241 17 днів тому +1

    Hello very nice video! I live in Bulgaria, Europe and i tried to flash my tcm on my GMC Sierra 2014. I purchased a subscription SPS for 2 hours and was 18 euros. When i download the software it downloaded me TLCSuite 2, which i think is not the installation file and when i tried to launch techline connect from the browser it gives me error UEH101: null. I waste my money. Please help me and thanks in advance!

    • @DallasAutoDiag
      @DallasAutoDiag  16 днів тому

      Hi, I will not be able to help you because the process here is different than over at your country. Your best thing to do is to call customer support and ask their halp

  • @edricsmith20
    @edricsmith20 2 роки тому +1

    Thanks for video excellent, you have any videos on installing and programming late model gm instrument cluster with digital imformation center?

  • @coltoncyoung
    @coltoncyoung 6 місяців тому

    anyone know if you can update with older calibrations?

  • @erkfilms7026
    @erkfilms7026 10 місяців тому +1

    How to purchase techline software and create or register in Brazil? The Acedelco website is not open.

    • @DallasAutoDiag
      @DallasAutoDiag  9 місяців тому

      Sorry no spanish

    • @erkfilms7026
      @erkfilms7026 9 місяців тому

      @@DallasAutoDiag
      Reply the question in English

    • @DallasAutoDiag
      @DallasAutoDiag  9 місяців тому

      @@erkfilms7026 sorry I don't have any knowledge of tge process in Brazil. What you can do is contact acdelco themselves via email and follow their response. I'm sure they know better than me as they are the provider of the service.

    • @erkfilms7026
      @erkfilms7026 9 місяців тому +1

      @@DallasAutoDiagExcellent idea. thank you very much

  • @mirzo9154
    @mirzo9154 Рік тому

    what should I do if I living in ASIA Kyrgyzstan?

    • @DallasAutoDiag
      @DallasAutoDiag  Рік тому

      Try calling acdelco and see if they have a solution for you. I know poeple in the Middle East have accounts so there should be a way for you.

  • @vernonbocock1516
    @vernonbocock1516 2 роки тому +1

    Thank you for posting the video, but could you please turn up your volume abet more because i have my PC at 100% and i can barely here you.

    • @DallasAutoDiag
      @DallasAutoDiag  2 роки тому

      Yes sir. Even when editing the viseo I turned the volume up on those clips.

  • @pancho9813
    @pancho9813 2 роки тому

    I have an issue with the website. It says unknown error occurred. please refresh page to try again. can somebody help me with this problem. I have an MSI laptop.

    • @DallasAutoDiag
      @DallasAutoDiag  2 роки тому

      What jbox you are using? are you sure u have good internet connection?

    • @pancho9813
      @pancho9813 2 роки тому

      Yes I have a good internet connection. I try to open ac delco tds and I gives me that error and when I open it in another computer like a Lenovo it lets me open the website. I don’t know why is not letting me load the page

    • @DallasAutoDiag
      @DallasAutoDiag  2 роки тому

      @@pancho9813 sounds like the computer not acdelco site. Try same computer but different browser.

  • @patsuddarth1093
    @patsuddarth1093 Рік тому +1

    Good evening, Sir. I tried to program my ECU, and BCM. However, I am getting error code 9044. Something about failing to get a tool lock. Do you know how I can resolve this error, so I could program my listed modules, Sir?

    • @DallasAutoDiag
      @DallasAutoDiag  Рік тому

      What year and model? Used or new modules?

    • @patsuddarth1093
      @patsuddarth1093 Рік тому

      @@DallasAutoDiag Chevy Express Van, 2500. 2008, Cargo van. Both modules are new.

    • @DallasAutoDiag
      @DallasAutoDiag  Рік тому

      @patsuddarth1093 you should be OK then. I'm not sure what's going on. Remember, tlc has not been stable at all recently.

    • @patsuddarth1093
      @patsuddarth1093 Рік тому

      @@DallasAutoDiag , Oh ok, well I pray all goes well, when I do this. I'm is a 64-bit, laptop/tablet with Windows 10, on it. But, I didn't know techline connect wasn't being stable.

  • @JohnPenwell
    @JohnPenwell Рік тому +1

    Whats the cost for you to install techline connect

  • @viplegaleducation1292
    @viplegaleducation1292 2 роки тому +1

    How is this affordable for the diy mechanic? Any ideas on how one could afford this software? Liked, commented, and subscribed.

    • @DallasAutoDiag
      @DallasAutoDiag  2 роки тому

      The software does not cost anything. The programing does.

  • @jessecastrellon6150
    @jessecastrellon6150 2 роки тому +1

    I have tried removing and reinstalling and the app crashes like no ones business it’s incredibly frustrating .

    • @DallasAutoDiag
      @DallasAutoDiag  2 роки тому

      How many RAM on your computer?

    • @jessecastrellon6150
      @jessecastrellon6150 2 роки тому +1

      8 gbs ram 5.9 useable

    • @DallasAutoDiag
      @DallasAutoDiag  2 роки тому

      @@jessecastrellon6150 how about logging to your computer using safe mode?

    • @jessecastrellon6150
      @jessecastrellon6150 2 роки тому

      Not sure how to perform that

    • @DallasAutoDiag
      @DallasAutoDiag  2 роки тому

      @@jessecastrellon6150 first uninstall everything, then have your installation file ready on your desktop. Restart your computer and once it starts to boot keep pressing F8. Then you will login to safe mode. Install tlc and see if you get any error.

  • @jsanchezj
    @jsanchezj 2 роки тому +1

    Can install in Windows 11?

    • @DallasAutoDiag
      @DallasAutoDiag  2 роки тому +1

      You can but it's not recommended you will not get the support from Tech line connect

    • @jsanchezj
      @jsanchezj 2 роки тому

      @@DallasAutoDiag thanks!

  • @user-fw6gu6pl3w
    @user-fw6gu6pl3w 9 місяців тому +1

    Hi please, I need your help

  • @marcoslochette8806
    @marcoslochette8806 Рік тому +2

    Opa boa noite, como falso pra conseguir esse programa ??

  • @ThanhNguyen-es7mr
    @ThanhNguyen-es7mr 2 роки тому

    how to register an account Gm techline connect?

    • @DallasAutoDiag
      @DallasAutoDiag  2 роки тому

      go to acdelcotds.com and register a new account. then buy a programming subscription the day you are doing a programing for a vehicle.

    • @C.mecatronic
      @C.mecatronic 2 роки тому

      @@DallasAutoDiag do you have other link?

    • @DallasAutoDiag
      @DallasAutoDiag  2 роки тому

      @@C.mecatronic
      ua-cam.com/video/oJoc1RRLAiE/v-deo.html

  • @saulmendoza8137
    @saulmendoza8137 Рік тому +1

    What’s is your address? you are in Dallas ?

  • @geidsonqueiroz2680
    @geidsonqueiroz2680 2 роки тому +1

    Olá você faz a instalação do software via remota

    • @DallasAutoDiag
      @DallasAutoDiag  2 роки тому +1

      Sorry only English

    • @geidsonqueiroz2680
      @geidsonqueiroz2680 2 роки тому

      hello I asked friend if you do the installation. of the software to me via remote

  • @mirzo9154
    @mirzo9154 Рік тому

    it's not working in my country

  • @user-fw6gu6pl3w
    @user-fw6gu6pl3w 9 місяців тому

    I’m in Saudi Arabia

  • @mouhamedquran8933
    @mouhamedquran8933 Рік тому +1

    🥰