BUILDING THE ULTIMATE GARAGE PRESSURE WASHER DETAILING WALL!
Вставка
- Опубліковано 21 кві 2019
- PLEASE SUBSCRIBE AND CHECK OUT👇🏽👇🏽👇🏽
WORKFORIT APPAREL: www.workforitapparel.com
100' HOSE REEL:
amzn.to/2ZsYiLI
PRESSURE WASHER:
www.pressurewashersdirect.com...
JUMPER HOSE:
amzn.to/2ICeVPI
50' 3/8 HOSE:
amzn.to/2Drb0kC
GET MY SUNGLASSES HERE: amzn.to/2SnnS0s
VLOG CAMERA: amzn.to/2CZfPll
GOPRO HERO 7: amzn.to/2VCZaLO
BULLET ANTENNA: amzn.to/2SK1Oxt
5" EXHAUST: amzn.to/2SLBR0u
MICROPHONE: amzn.to/2VFYtB7
JOYING HEADUNIT: amzn.to/2s8WmbD
CONTACT INFO:
Instagram:
dmaxryno?h...
Email:
Dmaxryno@hotmail.com - Авто та транспорт
WORKFORIT Keytags are back in stock!
www.workforitapparel.com
So basically this is the cheaper ripped off version of what Matt from Obsessed garage did you could’ve at least gave him some credit for his work honestly Matt did it better
@DMAXRYNO Have you ever thought of selling a workforit flag?
Aaron Langdon WORKFORIT is different and his way of contributing to people like himself and you shouldn’t hate on him. He’s made his brand and you can make yours.
Ranchtaco 16 well if you would’ve read both of my comments you would’ve no I wasn’t trying to hate on him and I am making my own dreams I just bought myself a house in cash that I am flipping for a huge profit I just thought He could give Matt a shout out even if people don’t buy his pressure washer they can buy other products from him helping his business out which I am sure Workforit apparel Would appreciate as a business because he would want someone to do the same
Damn some people get way to serious lol😂 but Yee check out obsessed garage he has all the right fittings and connections and blue hoses idk if he has 4 foot hoses he might fer sure 6 foot tho.
Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use ua-cam.com/users/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
That will make it easier to detail. Keep'em shining.
Thank you for inspiring me to get off my butt and do something that matters in my city. Love everything you're about and the message you convey. Hope to see you chris and Dave up at FLOGFEST this August! Keep it up brother!
I love that setup wouldn’t mind having that at my home honestly would be amazing
This is awesome Ryan I'm literally going to build one now!
Another good video bro! Keep up the good work! I look forward to watching your videos everyday!👍🏼
I JUST picked up this pressure washer! Waiting on my cox hose reel as it's backordered with the mount, but I really liked that you showed how to make the entire shelf unit. This is perfect and I think a MUCH better solution than spending $120 on a s/s metal shelf that the pressure washer sits on. One thing that people do NOT mention is that since you used wood it will actually dampen the noise of the pressure washer compared to a metal shelf which would amplify it!. Can't wait to use my 630 TSS this weekend for the first time.
Obsessed Garage for your hose. He has all the cool stuff, and watch his videos if you want to take detailing to the next level
This turned out to be a nice set up
Love all your Milwaukee tools, and your truck and love the videos
Turned out to be a nice set up
Thank you Ryno you rock
I LOVE WORK FOR IT!
Obsessed Garage for ypur fitting s too
Please make more content like this. It’s awesome to show your skills in craftsman ship. Although I do like videos on the truck these videos top it
This has the same effect as watching your bbb build videos. Can’t wait to see the warehouse done.
Great vid as always. I did a similar install on my channel. Stoked to see videos of cool garage setups.
I came to your channel for truck content, but I have to say I really enjoy all of your content man. keep it up!
TheKiller8879 same here, love it all
I mounted mine using a french cleat system. Made it very easy to get it up level and not struggle with it.
Please be sure to record when a leak from the high pressure hose sprays all over that electrical panel 12 inches away. And then the reaction when you find out the insurance company isn’t covering that claim because it wasn’t built to code. Should make for plenty of “likes!” Placing rubber spacers between the wall and plywood AND under the pump will help reduce noise vibration. Good tip with the rubber paint. Great job on the build.
You could always add some fairly heavy duty (short) springs with thick washers on both sides, under the pressure washer to absorb some of the vibration you will get if it's directly mounted. Pads will work too probably but might not work for long if you use it too frequently. I'd definitely try and go with SS braided hose as well. This setup is going to be sick. Great job.
Great videos
I'll be making this in garage soon 😁
Great video 👍 👍
Wedges are life i use them for my ac units on concrete pads
Saw you looking at a truck from lime ridge. I've heard nothing but good things from that place! I can't wait to see the future cateye
with two or three caots the roll on bed linner turns out pretty good and doesnt look bad
A W126 Mercedes in background ?! THE MAN HAS STYLE !
Cox hose reels are worth the money. I have one with my pressure washer setup
Oh dang almost missed the Martinez hammer. This man knows quality, very appreciable
Nice job fellas! When do we get to see Tahoe project?
Great video. I am getting ready to order one tank and am thinking of how to mount my pressure washer and you gave me an idea. I have a electric Ryobi pressure washer have had it for about a year and it works great and it's small.
6191904life awesome! Good luck on building your setup!
You'll like using hot/ warm water to wash with. Warm water cleans better.
I loved Christopher when he was on Storage Wars.
I just set up my pressure washer to. Like seriously just looked at my phone n got the notification.
that is a great build. 'im gonna extract some ideas from your video and construct my own
Love all the videos. Btw(first)
Hey Rino house your day? Love your content lately keep it up!
david The awesome Why would he want to house his day?
DOPE!
Hydraulic hose and fitting shops also carry those type hoses. You can have them made to length needed also they can replace the ends on the hoses.
@dmaxryno you’re totally right! If you can make boring chores easier to do then they almost do themselves!! Well, not in that way... Good work tho, looking forward to see how your car wash station works out 👍🏻
You could use braided hose wrap to cover the green hoses. Basically the same stuff you'd use to cover hoses under the hood of your truck.
Gonna be sweet!!!
PVC? I would run copper. Then again, I am a guy with high standards. Also, your patch hose from that outlet to the pump inlet can be done with black rubber hose that you can probably buy in bulk at a hardware store and install either crimp brass or just some standard ends and making one of those ends a 90 degree going into the pump. The same could be said for the outlet, a 90 degree fitting, if it works going down to the hose reel.
Very nice setup... HUGE garage! How do you plan to deal with the water evacuation in the garage? I don't have any drains in my garage so I wash my vehicle in the driveway.
Use stanless steel washer mashine hoses
Cooper good idea
Can you make a video on your tools and how you keep them organized
I go to a local hose shop that will build nice goodyear water hoses at any lenght. Its H and S hose up here in Bakersfield but I am sure there is a place down there.
15:22 super good advice, Ryno kind of blew through it though.
Obsessed garage is the place to get detailing products and pressure washer materials
Have you thought of a system like CR for DI water?
Warm weather is back business is rolling. Almost ready to spend some money on your tanks and t shirts for summer work shirts. Wish you sold cargo pants/shorts
Ryno the wear house is looking good
Found the AR 630 at a lower price on Amazon. Just not the hot water one. Scroll tru the models and you will find the one for $594 . Thank you for the great ideas, need to find a good set up to wash down my work truck Ford F-550 and the Family vehicle’s.
I just orderd my hoodie today
Nike Elite challenges 6522 Appreciate it bud!
One small note on this particular model if you walk away for more than 5 minutes you need to turn the unit off to avoid overheating. I'm surprised the warranty is only for one year, hope you have good luck with it.👍
I was the first likeeeee and awesome scooter😂😂
So no more buddy washing your truck anymore? Great vid bro. Man one of these days I'm gonna get me a diesel any way man keep up the sick vids my guy.
Just Braaap It he’s still the main guy for the truck, this is just for quick maintenance washes or when he’s busy.
3:09 The BOAH challenge. Arthur Morgan from Read Dead Redemption 2 approves lol. "Where's my pressure washer, BOAH?!"
Could you do a review on Chris’s work truck?
more projects!
We use redheads on foundations on our toe then the rest anchor bolts most of the time around doors are lintels or finished basements
Use a steel braided washer hose instead of the green ones
Was going to comment same thing, the ones for washing machines
13:15 Lmao! Chris just being lazy!
Hey RYNO, any chance we can get a red white and blue small decal like the one work for it hat? Would love to get a few and support
Going for a little bit of OG Obsessed Garage Action!
Washing Machine Hoses, you can get them in black or stainless.
Sweetaaaa
Do 4’ branded washing machine hoses I’m sure you can get them in black or silver
Future reference the Krenzle 1322ts is the best for detailing puts out 2.3gpm whilst keeping 1100 psi best u can get and its pretty much the same price as that AR blue
Brad Taft that model is $200 more and doesn’t shut off when the trigger is released. To me the AR blue is superior with that feature.
The ar630 provides higher output than the kranzle and is cheaper. It’s a no brainer
Have you considered getting an air blow dryer to dry your truck?
what type of di tanks are those and filter indicators?
What about steel braided lines from a clothes washer?
My cheap harbor freight electric power washer also shuts off when you let off the trigger....
😁😁
definently would make a miny boundry wall/stopper on the shelf the washer is on so it doesnt dance its self off of the shelf while outside an using it
If you want a shut off valve on the pvc use a true union ball valve. Use them all the time at work. Really the only time i have one leak on me is if the oring wasnt seated properly, plus if it does leak you just unscrew it and put a new one in
Try the shark bite ball shut off valve
Dude I have grey medical grade hose ! For your application
My pressure washer has the exact same wand and I purchased a threaded quick connect fitting that attaches to my foam cannon so you don't need to purchase a different wand.
Is the pressure can use a foam cannon?
Ryno, you need to get ahold of obsessed garage.
Is that a Hart WOODY framing hammer? I thought I was the only guy with one still
Plz get a OBS chevy or GMC for a little project daily
If you take the feet off the pressure washer you can bolt the pressure washer to the shelf so when your playing basket ball the ball doesent knock it off I know it’s heavy but all it takes is that right angle and better safe then sorry
I saw that crooked line, with my naked crooked eye!! :)
The hose reel, is that connection point fixed or does it rotate once you have a hose connected to it? When you were turning the system, it looks like it continues to spin with the handle. Looks like that will be an issue if that's true....
TheScatManMan it’s just stiff and had no resistance on it. The drum spins independently from the connection.
Does that fitting on the hose reel swivel? I noticed it was rotating when you were cranking it, and that would mean you’d have to disconnect your whip when winding up your hose. Also make sure your whip is pressure rated to whatever you are running your washer at.
Todd 419 yes, it swivels. It’s just a bit stiff so it was spinning with the drum with no resistance on it.
DMAXRYNO I figured it did, but thought I’d ask.
Should've checked out Obsessed garage before buying but whatever , it's a fun project to do your self none the less
he's overpriced
Why go through a middleman? Better to buy from the source
you should see if you can get some AN fittings and some steel braided hoses that would look SUPER cool but maybe to much $$ for what you willing to spend. just an idea though
I have to say my first concern was in the opening shit when you indicated where you wanted to mount everything. Does the electrical panel/breaker box next to your pressure watcher not worry you? I had hoped to see how wet it became under operation bb.
No water anywhere near any of the equipment while operating.
How much PSI would you recommend for an electric pressure washer for cleaning my aluminum wheels on a mercedes s550? I see some say online that you can harm the car if the pressure is too high.
Sure, but it’d be real hard to get that kind of pressure from an electric unit. Anything under or around 2000 psi is just fine. But you do want high GPM for washing purposes. If you haven’t pulled the trigger yet, hope this helps
Need a diablo blade on that small saw cuts way better
How tall was the plywood cut to? You mentioned the width was 2 feet.
@dmaxryno I was reading up on that particular pressure washer and it's got a siphon hose on it for 'detergents' and automatically mixes the correct amount of water with it. Curious to know if that will eliminate the need for the foam cannon all together.
Matthew Egbert no, that is different from a foam cannon. It may apply soap but it won’t get frothy like a foam cannon.
@@DMAXRYNO gotcha! Would have been cool if it would work though
Use steel braided washing machine hose. Comes in various sizes and is more durable in the event of hose failure. Less likely to flood you out.
P.S. I’ll take a WFI hat instead of my $10 bux.
If anyone is going to buy water hoses, do yourself a favor and buy Craftsman Garden hoses. you can get them at ACE Hardware, or order them off the internet. They have a lifetime warranty, and you can leave them on 24/7 in the sun and even run over them and they will not swell or bust. Bottom line is they're awesome!
Use some black wire loom to cover the hoses.
I’m still hearing Chris’s whistle due to the price tag on the pressure washer. Haha.
Damn drank your coffee! Talking fast! lol