I definitely feel ya when you had too short of a engine hoist. Helped my buddy take out an engine out of a 97 wrangler with a engine hoist that maxed out at a 90° angle. We were lucky we were on a car hoist so we took off all tires and lowered it until the brakes were a inch off the ground. Only from there we had about a half of an inch clearance from the oil pan to the car.
Sweet Vid, Eric. Not surprised the parts store stand didnt work for the engine. We dabbed our own back in the day for BB Chevys and BB Mopars. We also added some more bracing for the weight of those monsters! Cant wait for the next video.
As a UA-cam expert who has never owned a Charger, I know you can take the engine and trans out by disconnecting the k-member and lifting the front of the car up to get your drive train out.
Yo Eric, just sending some support from the great midwest! I know how ya feel man, I helped a buddy pull a 302 outta his F150, and that was one of the most frustrating times I've had trying to pull a motor. It took us about a week to finally get the engine out! Super glad it didn't take you that long man. But at the same time, u pulled a motor from a Dodge and I pulled one from a Ford, so you were bound to get that motor out quicker and easier lol. All I know is that's the last time I'm pulling an engine from a Ford lol.
@@PredaFran i will be buying some stuff from brewers. but what i have now was bought from the guy i got my car from, minus my shifter and some other stuff
You Always have good content man 👍
Thanks brother
I love this channel the memories and the amazing vehicles featured to keep up the great work eric!
Hey bud love the car yee yee sending love from Texas looks great bud
I definitely feel ya when you had too short of a engine hoist. Helped my buddy take out an engine out of a 97 wrangler with a engine hoist that maxed out at a 90° angle. We were lucky we were on a car hoist so we took off all tires and lowered it until the brakes were a inch off the ground. Only from there we had about a half of an inch clearance from the oil pan to the car.
Oh yeah she’s back
I aspire to own an old muscle car like yours someday. I’m so jealous!
Keep doing videos like this. Love car rebuilds
I'm surprised this channel doesnt have 100k subs. Great video man 👍
really enjoy watching these videos keep them comming
Sweet Vid, Eric. Not surprised the parts store stand didnt work for the engine. We dabbed our own back in the day for BB Chevys and BB Mopars. We also added some more bracing for the weight of those monsters! Cant wait for the next video.
Defiantly like this type of content, can't wait for the next vid.
Good luck brother! Can't wait to see more results. Love the progress already...
Keep it up man 👍
Awesome seeing it all happen bud. Looking forward to see more progress as you go.
Would love to see some more content like this man
Love this video keep doing them like this!!
Lol was buddys cheechin some electric lettuce in the beginning of video lol
Owain Davies nah was just smoking darts
Please do a tool box tour!
Love watching you bud. You remind me a lot of some of my friends here in Maine. Keeps doing what you do .
Eric Pleau thanks man!
Hell ya !
Don't ya love having a plan then it goes out the windows 2 weeks later you spend and extra 800....Cars!
As a UA-cam expert who has never owned a Charger, I know you can take the engine and trans out by disconnecting the k-member and lifting the front of the car up to get your drive train out.
of course you can, doesn't mean its less work. how am i supposed to lift my car high enough with 2 small floor jacks. not gonna happen
@@FL4TFOUR nah man. You pick up the front end of the car with the engine hoist and roll the engine out on the k member.
Yo Eric, just sending some support from the great midwest! I know how ya feel man, I helped a buddy pull a 302 outta his F150, and that was one of the most frustrating times I've had trying to pull a motor. It took us about a week to finally get the engine out! Super glad it didn't take you that long man. But at the same time, u pulled a motor from a Dodge and I pulled one from a Ford, so you were bound to get that motor out quicker and easier lol. All I know is that's the last time I'm pulling an engine from a Ford lol.
Greetings from Poland. Gen Lee is also my little dream. Yours looks not too bad actually
More Of this content for sure a833 trans is what you’re going with I’m assuming?
He went full cootter mode
Looking promising man, best of luck.
I love it ❤
Got a good start on the general
Shoutout from St. Albert lol keep making videos like this
Love this kinda of stuff and I want a car like yours man... Aj from moncton.. I'd love to come give u a hand working on your car sometime
The general Lee looks weird with the door open but other than the he's looking good
Fuck ya love that car my man. Keep it up
Love the new vlog keep it up
Just curious how much money have you put in it? Because i would like to do a general lee build in my future
Get her self a wrecked hellcat and a 6 speed to get you really rippin
Man I want a general lee. Be nice if they were 200 bucks as a roller
"smokin darts like a frekin animal"
You should fix spot where the paint has come of on the right fender
Minor details. Bottom of the list at this point
good content keep it up
SAPPO
Loving the wrenching videos brotha
Love the vids!
So when you get the general up and running can I go for a ride please
New Brunswick flag! Born and raised bud!
wheres pt2 bud?>
I want Eric to be a side character in something like far cry 5.
New Brunswick flag Representing! Howz she goin there bud from NB!
440, 700+ pound engine.
Where can I find that poster?
All you really need to pull an engine is a winch and a good sturdy tree branch
318 or 360? And you gonna rebuild the engine. Great vids bud
440
or 440
I dident even notice you said that man my bad. You rebuilding it or just gonna mod it
My buddy's dad has a 69 Plymouth cuda with the 440 all matching numbers. Shes a screamer bro
Just Braaap It a 440 in a A body Barracuda ? Thats weird i never knew from the factory they put a 440 in that small engine bay.
Hey man some love from scotland, I a bit of a tool freak what tools do you use?
"Today is a new day"
Is wearing the same shirt
why wear another shirt when im just gonna get dirty again?
@@FL4TFOUR True, gives a consistent look throughout the video too.
Enjoy your videos and streams, keep up the good work!👍
How's the mazda going?
chris has it all legal and on the road, running good
Tend to chew if you want to screw
Are you gonna get a new center console?
PredaFran going to make my own. The original one is lame
@@FL4TFOUR did you have to buy all the shifter parts from Brewers or used parts a homie had
@@PredaFran i will be buying some stuff from brewers. but what i have now was bought from the guy i got my car from, minus my shifter and some other stuff
@@FL4TFOUR if you do long tube headers modify the z bar even if you think you don't need it. That clearance is usually gonna fuck you over
decent.
Why don't you sell me 4 of those wheels
🇺🇸😎🍺🥩
I got a question fer ya are u a newfie cuz u sound like one I should know cuz I am one
Pin this comment
Yank the thing out