Thank you so much for your support. May I ask the screw driver size please? I tried to open it but couldn’t find the right size 😢. Thank you and waiting for the response. 😊
Enjoyed your video. I was looking for how to fix a problem with crooked printing and slightly off the top of the page maybe 1/4" It is too far off for alignment to work as it says it can't read the test page which printed crooked also. Not sure what I will be looking for as I disassemble as you did but if you have any suggestions that would be great.
Hi. Thank you very much for your support! I suggest checking the mainnpick up roller, the width set guide, and paper path inside printer to see if there is anything in the waybof the paper. I hope this helps and wish you success in fixing the problem.
I need to put the carriage belt back on the posts. Do I need to take all this apart? If so how I do I not break that piece when you're taking off the cover?
I need to access where the gears are for the scanner. theres a piece of hair or something laying in their that makes a crooked line on printed out papers. How can i do this from the top of sccanner/printer glass that has the blue frame?
How long does the 2032 battery last and when it starts to fall dead what symptoms does it cause? I'm getting a black screen with no touch screen ability. Wondering if the battery is dead or if I have a bad touch screen
It can be many things. I would first try removing ink and clean the contacts on the back of cartridges and inside the carrier. If error goes away, that may have been it. It may also be a faulty cartridge if the error appears after you install ink. Check the inside of the printer to make sure everything is in place and nothing is there that shouldn't be such as piece of paper or clip,
Thanks so much for sharing!!! You helped me fix my printer!! Had to swap motherboard out!!
Thank you so much for your support. May I ask the screw driver size please? I tried to open it but couldn’t find the right size 😢. Thank you and waiting for the response. 😊
Hi. The screwdriver is a torx size 10 or T10 star shaped screwdriver. If you have a set if screwdriver bits, this size should be available in it.
Enjoyed your video. I was looking for how to fix a problem with crooked printing and slightly off the top of the page maybe 1/4" It is too far off for alignment to work as it says it can't read the test page which printed crooked also. Not sure what I will be looking for as I disassemble as you did but if you have any suggestions that would be great.
Hi. Thank you very much for your support! I suggest checking the mainnpick up roller, the width set guide, and paper path inside printer to see if there is anything in the waybof the paper. I hope this helps and wish you success in fixing the problem.
How can I clean the printheads? I’ve got streaks running across my printed pages and the built in cartridge cleaner doesn’t help. Thanks for the video
Hi. This video has helped a few people fix that issue. I hope it helps you too:
ua-cam.com/video/tKbmfxKH56U/v-deo.html
I have a place that gives me all the electronics they get in. I took apart 5 or 6 of that one. Looks like an episode of Hoarders at my house.
I need to put the carriage belt back on the posts. Do I need to take all this apart? If so how I do I not break that piece when you're taking off the cover?
My Output extender is broken do you have any recommendations on how I can fix that?
I need to access where the gears are for the scanner. theres a piece of hair or something laying in their that makes a crooked line on printed out papers. How can i do this from the top of sccanner/printer glass that has the blue frame?
How long does the 2032 battery last and when it starts to fall dead what symptoms does it cause? I'm getting a black screen with no touch screen ability. Wondering if the battery is dead or if I have a bad touch screen
Same as what happened to mine. I swapped out the mother(logic)board and that fixed it.
How can i put back my paper roller does not seem to go in what so ever
Could it be out of place on either side?
This!!!! I was waiting for him to take that part out. It's been 3 months, over and over, it will not go back in properly
Any thoughts on what might be causing the error 0XC4EB8000?
It can be many things. I would first try removing ink and clean the contacts on the back of cartridges and inside the carrier. If error goes away, that may have been it. It may also be a faulty cartridge if the error appears after you install ink. Check the inside of the printer to make sure everything is in place and nothing is there that shouldn't be such as piece of paper or clip,
Question, is there a fuse for power supply
Yes, I took one apart
seen u break that latch at 1:10 🤣 had to clear that throat
LOL. Have a great weekend!
How do I put the piece at minute 1:10? 😭😭
Why my HP 4655 printer make just momentary blue flash on display ?
MY ROLLER COVER IS STUCK BY PAPER JAM. CANNOT REMOVE
Try lifting the paper path cover to ease the paper.